SewGraph

baby lock · verified physical machine

Unity

Cited model code BLTY

View cited identity evidence · 4 unique proof passages

Jump to: Proof E1, Proof E2, Proof E3, Proof E4

verified exact machine · 2/3 core systems

Identity verified · evidence for each answer

Using and maintaining this machine

Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.

Presser feet and adapters

How is the presser foot changed safely?

conditional

Native snap-on feet. Raise the needle, lock the controls, raise the foot lever, press the holder's black button to remove the foot, align the replacement foot pin with the holder notch and lower the lever until the pin snaps into the notch, then unlock the controls and raise the presser-foot lever.

  • Use the correct foot for the selected stitch and install it in the correct direction before sewing.

Source evidence · 1 unique proof passage: Profile Proof E1

What presser-foot compatibility boundary does the manual state?

conditional

Use presser feet made for this machine.

  • No standardized shank, universal fit, third-party fit or cross-brand compatibility is established.

Source evidence · 1 unique proof passage: Profile Proof E1

Needles and threading

Which needle system or category does the manual specify?

conditional

Use home sewing machine needles, specified as HA × 130.

  • No broader product equivalence is established.

Source evidence · 2 unique proof passages: Profile Proof E2, Profile Proof E3

How is a needle inserted safely?

conditional

Raise the needle, lock all keys and buttons, loosen and remove the old needle, then insert the straight replacement fully to the stopper with its flat side facing back and securely tighten the clamp screw before unlocking the controls.

  • Cover the needle-plate hole first; an incompletely inserted or loose needle can break or damage the machine.

Source evidence · 2 unique proof passages: Profile Proof E2, Profile Proof E4

Which needle choices depend on fabric or thread?

conditional

Use 75/11 for embroidery and ballpoint 75/11 for short-jump patterns when thread trimming is on; a 90/14 needle is recommended when embroidering on heavyweight fabrics or stabilizing products.

  • The 90/14 statement is a recommendation limited to the manual's stated embroidery conditions; 75/11 may bend or break on heavyweight or stabilizing products.

Source evidence · 1 unique proof passage: Profile Proof E5

Care and ownership

Should the owner oil the machine?

conditional

Do not oil the machine as an owner; the manual says its manufacturing oil makes periodic oiling unnecessary.

  • Stop using the machine and contact an authorized retailer for a difficult handwheel or unusual noise; do not oil the bobbin case.

Source evidence · 2 unique proof passages: Profile Proof E6, Profile Proof E7

How should the race and bobbin area be cleaned?

conditional

Raise the needle, switch the main power off and unplug, remove the needle, foot, holder, flat-bed attachment or embroidery unit, needle-plate cover and bobbin case, then brush or vacuum lint and dust from the race, bobbin-thread sensor and surrounding area before reinstalling the case in the illustrated alignment and replacing the cover.

  • Do not oil the bobbin case or use a scratched case; correctly secure any removed needle plate before reinstalling the case.

Source evidence · 2 unique proof passages: Profile Proof E6, Profile Proof E7

Features and specifications

What is the maximum sewing speed?

supported

The maximum sewing speed is 1050 stitches per minute.

Source evidence · 1 unique proof passage: Profile Proof E3

Bobbins and hook

Which exact bobbin is specified?

conditional

The manual identifies the included bobbin by part code X52800-150.

  • The same-type substitution boundary and warning about other models are reported separately; no Class 15 or X52800-120 equivalence is asserted.

Source evidence · 1 unique proof passage: Profile Proof E8

Which bobbin substitutions are supported?

conditional

Only the included bobbin or the same type identified by part code X52800-150 is supported.

  • Dimensions, material, hook orientation, case geometry, sibling and cross-brand substitutions remain unknown.

Source evidence · 1 unique proof passage: Profile Proof E8

Sources for the owner answers above
Official OEM PDF

What this passage supports

  • How is the presser foot changed safely?: Raise the needle, lock the controls, raise the foot lever, press the holder's black button to remove the foot, align the replacement foot pin with the holder notch and lower the lever until the pin snaps into the notch, then unlock the controls and raise the presser-foot lever.
  • What presser-foot compatibility boundary does the manual state?: Use presser feet made for this machine.
Always use the correct presser foot for the selected stitch pattern. Only use presser feet made for this machine. aligning the foot pin with the notch presser foot pin snaps into the notch to unlock all keys and buttons. Raise the presser foot lever.
Document
Baby Lock Unity BLTY instruction and reference guide
Issuer
Baby Lock
Extraction
Native document text
PDF page
57
Open source
Open cited PDF at page 57Open OEM source or support page
Advanced technical receipt
Asset SHA-256
45864e8f03a7a1aefc813bac784e0972684e5720c4ee7227e1ebfb62e7e74f70
Locator
1aa51e2b6bf59017cd08c04b1c359948871aca4e23e1fc72ee59ca637a70a836
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Which needle system or category does the manual specify?: Use home sewing machine needles, specified as HA × 130.
  • What is the maximum sewing speed?: The maximum sewing speed is 1050 stitches per minute.
70 to 1050 stitches per minute Home sewing machine needles (HA × 130)
Document
Baby Lock Unity BLTY instruction and reference guide
Issuer
Baby Lock
Extraction
Native document text
PDF page
325
Open source
Open cited PDF at page 325Open OEM source or support page
Advanced technical receipt
Asset SHA-256
45864e8f03a7a1aefc813bac784e0972684e5720c4ee7227e1ebfb62e7e74f70
Locator
6141ea169e1000d749979f005d3774126852063493fbbd55bfa15fde130c11fe
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Should the owner oil the machine?: Do not oil the machine as an owner; the manual says its manufacturing oil makes periodic oiling unnecessary.
  • How should the race and bobbin area be cleaned?: Raise the needle, switch the main power off and unplug, remove the needle, foot, holder, flat-bed attachment or embroidery unit, needle-plate cover and bobbin case, then brush or vacuum lint and dust from the race, bobbin-thread sensor and surrounding area before reinstalling the case in the illustrated alignment and replacing the cover.
must not be oiled by the user periodic oiling unnecessary Be sure to unplug the machine before cleaning it. Turn the main power to OFF
Document
Baby Lock Unity BLTY instruction and reference guide
Issuer
Baby Lock
Extraction
Native document text
PDF page
307
Open source
Open cited PDF at page 307Open OEM source or support page
Advanced technical receipt
Asset SHA-256
45864e8f03a7a1aefc813bac784e0972684e5720c4ee7227e1ebfb62e7e74f70
Locator
aa871a41335eb76563de98c4bbce27a036c384ef6c5ec49a4131a609ec9cb1dc
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Which needle choices depend on fabric or thread?: Use 75/11 for embroidery and ballpoint 75/11 for short-jump patterns when thread trimming is on; a 90/14 needle is recommended when embroidering on heavyweight fabrics or stabilizing products.
Use needle 75/11 for embroidery. ball point needle 75/11 It is recommended that a 90/14 needle should be used when embroidering on heavyweight fabrics or stabilizing products (for example, denim, puffy foam, etc.).
Document
Baby Lock Unity BLTY instruction and reference guide
Issuer
Baby Lock
Extraction
Native document text
PDF page
61
Open source
Open cited PDF at page 61Open OEM source or support page
Advanced technical receipt
Asset SHA-256
45864e8f03a7a1aefc813bac784e0972684e5720c4ee7227e1ebfb62e7e74f70
Locator
ac95c9a77835cab8f1e2016867ac87875f83b7fb77cc2c1ce4bb0ac3d2bde6fd
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Which exact bobbin is specified?: The manual identifies the included bobbin by part code X52800-150.
  • Which bobbin substitutions are supported?: Only the included bobbin or the same type identified by part code X52800-150 is supported.
included bobbin was designed specifically If bobbins from other models are used, the machine will not operate correctly. bobbins of the same type (part code: X52800-150).
Document
Baby Lock Unity BLTY instruction and reference guide
Issuer
Baby Lock
Extraction
Native document text
PDF page
42
Open source
Open cited PDF at page 42Open OEM source or support page
Advanced technical receipt
Asset SHA-256
45864e8f03a7a1aefc813bac784e0972684e5720c4ee7227e1ebfb62e7e74f70
Locator
baa489f8889d46c4d4434e28ae0d49f4e41d5beda0e01ad255fa3b7da991228d
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • How is a needle inserted safely?: Raise the needle, lock all keys and buttons, loosen and remove the old needle, then insert the straight replacement fully to the stopper with its flat side facing back and securely tighten the clamp screw before unlocking the controls.
flat side of the needle facing the back, insert the new needle all the way to securely tighten the needle clamp screw
Document
Baby Lock Unity BLTY instruction and reference guide
Issuer
Baby Lock
Extraction
Native document text
PDF page
60
Open source
Open cited PDF at page 60Open OEM source or support page
Advanced technical receipt
Asset SHA-256
45864e8f03a7a1aefc813bac784e0972684e5720c4ee7227e1ebfb62e7e74f70
Locator
d9255b7e08171c0e7aa2ecf515f83c49f614f065b97df0124fd28de774f246b9
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Should the owner oil the machine?: Do not oil the machine as an owner; the manual says its manufacturing oil makes periodic oiling unnecessary.
  • How should the race and bobbin area be cleaned?: Raise the needle, switch the main power off and unplug, remove the needle, foot, holder, flat-bed attachment or embroidery unit, needle-plate cover and bobbin case, then brush or vacuum lint and dust from the race, bobbin-thread sensor and surrounding area before reinstalling the case in the illustrated alignment and replacing the cover.
cleaning brush or a vacuum cleaner remove any lint and dust from the race Do not apply oil to the bobbin case. Make sure that you fit the bobbin case properly
Document
Baby Lock Unity BLTY instruction and reference guide
Issuer
Baby Lock
Extraction
Native document text
PDF page
308
Open source
Open cited PDF at page 308Open OEM source or support page
Advanced technical receipt
Asset SHA-256
45864e8f03a7a1aefc813bac784e0972684e5720c4ee7227e1ebfb62e7e74f70
Locator
e2085775015c556a53e656050eaa27aab9ce00e7d38e2d19b815ab3781957d9c
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Which needle system or category does the manual specify?: Use home sewing machine needles, specified as HA × 130.
  • How is a needle inserted safely?: Raise the needle, lock all keys and buttons, loosen and remove the old needle, then insert the straight replacement fully to the stopper with its flat side facing back and securely tighten the clamp screw before unlocking the controls.
Use only sewing machine needles made for home use. Never sew with a bent needle. The entire screen becomes white, and all keys and operation buttons are locked.
Document
Baby Lock Unity BLTY instruction and reference guide
Issuer
Baby Lock
Extraction
Native document text
PDF page
59
Open source
Open cited PDF at page 59Open OEM source or support page
Advanced technical receipt
Asset SHA-256
45864e8f03a7a1aefc813bac784e0972684e5720c4ee7227e1ebfb62e7e74f70
Locator
e94b416d37e25df31ad603bce1263388e53abba633b2e8e5648dd6db72366ad8
Destination status
direct_pdf
Machine facets and OEM groups

Cited machine facets

Identity and compatibility badges

Identity families, physical traits, and OEM accessory groups stay separate. A group badge applies only to its named program and domains.

needle systemHA × 130bobbin part numberX52800-150OEM group · accessory, presser footBaby Lock Accessory Group: Baby Lock Accessory Group BOEM group · accessory, presser footBaby Lock Accessory Group: Baby Lock Group B
Detailed specifications, compatible parts, and source library

Evidence coverage

Core answers and cited items

Machine category

domestic sewing embroidery

View machine-type evidence · 1 unique proof passage: Proof E5

View proof JSONReport this claim

Core domains answered: bobbin, needle

Domains with cited compatible items: presser foot (56)

bobbinCore answer answered
needleCore answer answered
presser foot56 cited items; core not established

Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.

Specifications

Documented machine facts

Multiple cited representations for one field share one row. SewGraph preserves every value and exact proof passage; it does not guess which representation is “raw” or “normalized” when the public projection does not label that distinction.

needle

needle systemHA × 130

View exact evidence · 1 unique proof passage: Proof E6

bobbin

bobbin part numberX52800-150

Conditions: If bobbins from other models are used, the machine will not operate correctly.; The included bobbin was designed specifically for this sewing machine.; Use only the included bobbin or bobbins of the same type (part code: X52800-150).

View exact evidence · 1 unique proof passage: Proof E7

Parts & accessories

57 documented relationships

A two-hop result joins the machine’s official accessory-group membership to the OEM part matrix. Open the evidence to inspect both hops.

57 relationships shown

presser foot · 56

Applique Foot
BLA-AF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E10

View proof JSONReport this claim
Hemmer Foot
ESG-HF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E11

View proof JSONReport this claim
Teflon Coated Foot
ESG-TF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E12

View proof JSONReport this claim
Open Toe Foot
BLSY-OT
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E13

View proof JSONReport this claim
1/4" Quilting Foot with Guide
ESG-QGF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E14

View proof JSONReport this claim
Pintuck Foot
ESG-PF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E15

View proof JSONReport this claim
Pintuck Foot
BLSO-PK
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E16

View proof JSONReport this claim
Overcasting Foot
BL66-OF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E17

View proof JSONReport this claim
Overcasting Foot
BLG-OF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E18

View proof JSONReport this claim
Dynamic Walking Foot with Standard
BLSA-WF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E19

View proof JSONReport this claim
Walking Foot with 2 Guides - Low Shank
BLDW-L2
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E21

View proof JSONReport this claim
Piping Foot - Mini
BLSO-MP
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E22

View proof JSONReport this claim
Braiding Foot - Adjustable
ESG-BF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E23

View proof JSONReport this claim
Chenille Foot
BLSA-CHF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E24

View proof JSONReport this claim
Piping Foot-Left
BLSO-LP
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E25

View proof JSONReport this claim
Free-Motion Quilting Foot
BLG-FM
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E26

View proof JSONReport this claim
Quilt Binding Foot
BLSA-QBF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E27

View proof JSONReport this claim
Zipper Foot
BLG-WZF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E28

View proof JSONReport this claim
Felling Foot
ESG-FF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E29

View proof JSONReport this claim
1/4" Quilting Foot with Guide
BLSO-QGF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E30

View proof JSONReport this claim
Cording Foot - 3-Cord
BLG-CF3
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E31

View proof JSONReport this claim
Free-Motion Quilting Foot Set
BL-FMQS
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E32

View proof JSONReport this claim
1/4" Quilting Foot
BL37-QF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E33

View proof JSONReport this claim
Roller Foot - Metal
BLSO-RF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E34

View proof JSONReport this claim
1/4" Quilting Foot
BLSO-QF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E35

View proof JSONReport this claim
Double Cording Foot 7-8mm
BLSO-DCF8
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E36

View proof JSONReport this claim
General Purpose Zigzag Foot
BLG-ZZ
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E37

View proof JSONReport this claim
Double Cording Foot 4-6mm
BLSO-DCF6
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E38

View proof JSONReport this claim
Bi-Level Foot - Right
BLSO-BRF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E39

View proof JSONReport this claim
Straight Stitch Foot
BLG-SS
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E40

View proof JSONReport this claim
5/8" Adjustable Seam Guide Foot
BLSA-SGF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E41

View proof JSONReport this claim
Roller Foot
ESG-RF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E42

View proof JSONReport this claim
Monogramming N+ Foot
BLSA-MF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E43

View proof JSONReport this claim
Zipper Foot - Teflon
BLDY-TZF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E44

View proof JSONReport this claim
Blind Stitch Foot with Guide
BLG-BSGF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E45

View proof JSONReport this claim
Quilting Leather Roller Foot
BLSO-LRF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E46

View proof JSONReport this claim
Candlewicking Foot
BLSO-CWF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E47

View proof JSONReport this claim
Stitch Guide Foot
BLG-SGF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E48

View proof JSONReport this claim
Bias Binder Foot - Adjustable
ESG-ABB
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E49

View proof JSONReport this claim
Open Toe Foot
ESG-OT
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E50

View proof JSONReport this claim
Edge Joining Foot
ESG-EJF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E51

View proof JSONReport this claim
Bias Binder Foot
ESG-BB
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E52

View proof JSONReport this claim
Stitch-in-the-Ditch Foot
BLSO-SDF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E53

View proof JSONReport this claim
Cording Foot - 3-Cord
ESG-CF3
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E54

View proof JSONReport this claim
Zipper Foot - Invisible
ESG-IZF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E55

View proof JSONReport this claim
Border Guide Foot
BLDY-BGF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E56

View proof JSONReport this claim
Pearl and Piping Foot
ESG-PP
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E57

View proof JSONReport this claim
Open Toe Foot
BL66-OT
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E58

View proof JSONReport this claim
Cording Foot - 5-Cord
ESG-CF5
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E59

View proof JSONReport this claim
Hemmer Foot 4mm
BLA-HF4
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E60

View proof JSONReport this claim
Straight Stitch Foot
ESG-SSL
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E61

View proof JSONReport this claim
Blind Hem Foot
BL66-BLH
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E62

View proof JSONReport this claim
1/4" Quilting Foot
ESG-QF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E63

View proof JSONReport this claim
Fringe/Looping Foot
ESG-LF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E64

View proof JSONReport this claim
Ruler Foot - Low Shank
BL-LOTRF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E65

View proof JSONReport this claim
Bi-Level Foot - Left
BLSO-BLF
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E66

View proof JSONReport this claim

attachment · 1

Circular Sewing Attachment
BL-CSA
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Baby Lock Accessory Group · Baby Lock Group B, and the OEM matrix lists this part for that group. Edition 2025. Region us_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E9, Step 2 E20

View proof JSONReport this claim

OEM compatibility programs

Documented group memberships

Group codes are namespaced to the issuing OEM program and apply only to the cited domains. They are not machine series and do not prove compatibility outside those domains.

Baby Lock Accessory Group B

Baby Lock Accessory Group · code B

Applies to: accessory, presser foot

View machine-to-group evidence · 1 unique proof passage: Proof E8

View proof JSONReport this claim

Baby Lock Group B

Baby Lock Accessory Group · code B

Applies to: accessory, presser foot

View machine-to-group evidence · 1 unique proof passage: Proof E9

View proof JSONReport this claim

Official source library

Documents used on this page

Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.

Baby Lock 2025 accessory brochure

accessory compatibility

Open official source destination · 1 unique proof passage: Proof E2

Baby Lock Unity BLTY instruction and reference guide

instruction

Open official source destination · 1 unique proof passage: Proof E1

Evidence library

66 exact proof passages from 2 OEM documents

Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.

Open exact proof passages · 66 unique proof passages
Official OEM PDF

What this passage proves

  • Identity — printed machine name: BLTY
Model Number: BLTY
Document
Baby Lock Unity BLTY instruction and reference guide
Issuer
Baby Lock
Extraction
native
PDF page
6
Open source
Open cited PDF at page 6Open OEM source or support page
Advanced technical receipt
Asset SHA-256
45864e8f03a7a1aefc813bac784e0972684e5720c4ee7227e1ebfb62e7e74f70
Locator
ec3bc5e58c6991319c621ee4ace25ad2c16d21cd17ab7332991ffb8c06877f76
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — model code: BLTY
  • Identity — preferred display name: Unity
  • Identity — marketing name: Unity
Unity (BLTY)
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
3
Open source
Open cited PDF at page 3Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
6c9ff838a7f80feb895bb83a43dc074647bf800ec46935e48bf1fefd5b5fc8fd
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — marketing name: Unity
Unity (BLTY)   B/H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
3
Open source
Open cited PDF at page 3Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
d9289fb78271e02e0f895fb5748194d8e20fd249503a5f3891c054efefa75bef
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: BLTY
BLRA, BLRT, BLSA3, BLSA2, BLSA, BLTA2, BLTA, BLTY This foot enables the Needle Beam to highlight the exact needle drop point on your machine.
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
10
Open source
Open cited PDF at page 10Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
baedd8d05b86d08733ed831706ed2e3415b7e67cea6da54ba72c790799c6fabc
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Machine category — machine type: domestic sewing embroidery
internal machine number for the embroidery and sewing machine.
Document
Baby Lock Unity BLTY instruction and reference guide
Issuer
Baby Lock
Extraction
native
PDF page
32
Open source
Open cited PDF at page 32Open OEM source or support page
Advanced technical receipt
Asset SHA-256
45864e8f03a7a1aefc813bac784e0972684e5720c4ee7227e1ebfb62e7e74f70
Locator
434cbc7696a07962f9c276c5578e1c65f78a49bcdde615fe91e44dad511341c8
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • needle fact — needle system: HA × 130
  • Needle answer — HA × 130
Home sewing machine needles (HA × 130)
Document
Baby Lock Unity BLTY instruction and reference guide
Issuer
Baby Lock
Extraction
native
PDF page
325
Open source
Open cited PDF at page 325Open OEM source or support page
Advanced technical receipt
Asset SHA-256
45864e8f03a7a1aefc813bac784e0972684e5720c4ee7227e1ebfb62e7e74f70
Locator
96eac172a37a458c3f6760ecfaf4a942a5d6f7c79880ecb7d059784bdaa0d9f5
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • bobbin fact — bobbin part number: X52800-150
  • Bobbin answer — X52800-150
The included bobbin was designed specifically for this sewing machine. If bobbins from other models are used, the machine will not operate correctly. Use only the included bobbin or bobbins of the same type (part code: X52800-150).
Document
Baby Lock Unity BLTY instruction and reference guide
Issuer
Baby Lock
Extraction
native
PDF page
42
Open source
Open cited PDF at page 42Open OEM source or support page
Advanced technical receipt
Asset SHA-256
45864e8f03a7a1aefc813bac784e0972684e5720c4ee7227e1ebfb62e7e74f70
Locator
8d6cd7910707a713420fbbe4a0f4719cc2aee0e2b044bbc9f1499a55ce1666da
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • OEM program membership — Baby Lock Accessory Group: Baby Lock Accessory Group B
Unity (BLTY)   B/H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
3
Open source
Open cited PDF at page 3Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
f5c859618a225bc990f665ab280058fd8184103a41296f734611b7deaa2fd014
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • OEM program membership — Baby Lock Accessory Group: Baby Lock Group B
  • Item fitment path — this machine's OEM group membership for Applique Foot
  • Item fitment path — this machine's OEM group membership for Hemmer Foot
  • Item fitment path — this machine's OEM group membership for Teflon Coated Foot
  • Item fitment path — this machine's OEM group membership for Open Toe Foot
  • Item fitment path — this machine's OEM group membership for 1/4" Quilting Foot with Guide
  • Item fitment path — this machine's OEM group membership for Pintuck Foot
  • Item fitment path — this machine's OEM group membership for Overcasting Foot
  • Item fitment path — this machine's OEM group membership for Dynamic Walking Foot with Standard
  • Item fitment path — this machine's OEM group membership for Circular Sewing Attachment
  • Item fitment path — this machine's OEM group membership for Walking Foot with 2 Guides - Low Shank
  • Item fitment path — this machine's OEM group membership for Piping Foot - Mini
  • Item fitment path — this machine's OEM group membership for Braiding Foot - Adjustable
  • Item fitment path — this machine's OEM group membership for Chenille Foot
  • Item fitment path — this machine's OEM group membership for Piping Foot-Left
  • Item fitment path — this machine's OEM group membership for Free-Motion Quilting Foot
  • Item fitment path — this machine's OEM group membership for Quilt Binding Foot
  • Item fitment path — this machine's OEM group membership for Zipper Foot
  • Item fitment path — this machine's OEM group membership for Felling Foot
  • Item fitment path — this machine's OEM group membership for Cording Foot - 3-Cord
  • Item fitment path — this machine's OEM group membership for Free-Motion Quilting Foot Set
  • Item fitment path — this machine's OEM group membership for 1/4" Quilting Foot
  • Item fitment path — this machine's OEM group membership for Roller Foot - Metal
  • Item fitment path — this machine's OEM group membership for Double Cording Foot 7-8mm
  • Item fitment path — this machine's OEM group membership for General Purpose Zigzag Foot
  • Item fitment path — this machine's OEM group membership for Double Cording Foot 4-6mm
  • Item fitment path — this machine's OEM group membership for Bi-Level Foot - Right
  • Item fitment path — this machine's OEM group membership for Straight Stitch Foot
  • Item fitment path — this machine's OEM group membership for 5/8" Adjustable Seam Guide Foot
  • Item fitment path — this machine's OEM group membership for Roller Foot
  • Item fitment path — this machine's OEM group membership for Monogramming N+ Foot
  • Item fitment path — this machine's OEM group membership for Zipper Foot - Teflon
  • Item fitment path — this machine's OEM group membership for Blind Stitch Foot with Guide
  • Item fitment path — this machine's OEM group membership for Quilting Leather Roller Foot
  • Item fitment path — this machine's OEM group membership for Candlewicking Foot
  • Item fitment path — this machine's OEM group membership for Stitch Guide Foot
  • Item fitment path — this machine's OEM group membership for Bias Binder Foot - Adjustable
  • Item fitment path — this machine's OEM group membership for Edge Joining Foot
  • Item fitment path — this machine's OEM group membership for Bias Binder Foot
  • Item fitment path — this machine's OEM group membership for Stitch-in-the-Ditch Foot
  • Item fitment path — this machine's OEM group membership for Zipper Foot - Invisible
  • Item fitment path — this machine's OEM group membership for Border Guide Foot
  • Item fitment path — this machine's OEM group membership for Pearl and Piping Foot
  • Item fitment path — this machine's OEM group membership for Cording Foot - 5-Cord
  • Item fitment path — this machine's OEM group membership for Hemmer Foot 4mm
  • Item fitment path — this machine's OEM group membership for Blind Hem Foot
  • Item fitment path — this machine's OEM group membership for Fringe/Looping Foot
  • Item fitment path — this machine's OEM group membership for Ruler Foot - Low Shank
  • Item fitment path — this machine's OEM group membership for Bi-Level Foot - Left
  • Presser foot answer — 1 OEM-cited compatible items
Unity (BLTY)   B/H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
3
Open source
Open cited PDF at page 3Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
ff481ab129e517cfee17b8b95e1adb44ebe43e31539f89acfa86e93c220b3cfc
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Applique Foot (compatible)
(BLA-AF) Fits Models: Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
4
Open source
Open cited PDF at page 4Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
b968bd208297e5115f42a4b90227b0e7d6a86071b2a80f832dcfb6f07c33d46a
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Hemmer Foot (compatible)
(ESG-HF) Fits Groups A, B, D, G, H, I
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
14
Open source
Open cited PDF at page 14Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
9131afe308cfd6927104027197f2c55065640133e3d037442f8571cf857bba61
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Teflon Coated Foot (compatible)
(ESG-TF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
23
Open source
Open cited PDF at page 23Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
709e55cd4defdfb2a26ed339c3e2321d42d92380e802c4505725f489e629d09e
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Open Toe Foot (compatible)
(BLSY-OT) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
d14d8e9581fa33335d48fec6e54f4724c3fe4fd061455487130889ff25f101d4
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 1/4" Quilting Foot with Guide (compatible)
  • Presser foot answer — 1 OEM-cited compatible items
(ESG-QGF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
18
Open source
Open cited PDF at page 18Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
cd64eba79a5886e9d7b8ed8e3aeffefaf1fcec516eadf26a3a9d2e80f4f15cea
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Pintuck Foot (compatible)
(ESG-PF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
17
Open source
Open cited PDF at page 17Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
3aabc738406cf051748ceece3d04f4f362623e0cdf550b79eb13ddb751f8b38a
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Pintuck Foot (compatible)
(BLSO-PK) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
17
Open source
Open cited PDF at page 17Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
7cc09fb7d4503da9519d5e19bf652cec4b3abf1b47073507aa129fbbe1753f5a
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Overcasting Foot (compatible)
(BL66-OF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
5f40ae0af2830b3cf0cb0f887c855ef4c60481daba6f0bd60aaf703688931916
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Overcasting Foot (compatible)
(BLG-OF) Fits Groups A, B
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
17
Open source
Open cited PDF at page 17Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
6d8c99be2acd2123419a2b86d718af3880483f84d32d995b4037ad38c3addab7
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Dynamic Walking Foot with Standard (compatible)
(BLSA-WF) and Open Toe Sole Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
24
Open source
Open cited PDF at page 24Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
b6aa7791af48e5cbe18c245f1e0d82f2e4f4e7c3712f641eebe57fde41789e6d
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: Circular Sewing Attachment (compatible)
(BL-CSA) Fits Groups B, D, G
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
8
Open source
Open cited PDF at page 8Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
c323f1d0b42c0d7ff2c848eaae92b5d186706d571094ebf58c02d04cb3823c71
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Walking Foot with 2 Guides - Low Shank (compatible)
(BLDW-L2) Fits Groups B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
24
Open source
Open cited PDF at page 24Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
1556e7c2a06964790e8d4101b5aac02bfd7e5604161e891ddc86b82ff083a9fe
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Piping Foot - Mini (compatible)
(BLSO-MP) Fits Groups A, B, D, G
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
17
Open source
Open cited PDF at page 17Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
cb2ee79d5b82f9a69dec85990208c1b57fa69f0868148f469b9901d9c60071a9
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Braiding Foot - Adjustable (compatible)
(ESG-BF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
6
Open source
Open cited PDF at page 6Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
e17e51bb97e4dd44b53b78221d15ef09807044ecea4df266e59c1e007817c701
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Chenille Foot (compatible)
(BLSA-CHF) Fits Groups A, B, D, G
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
8
Open source
Open cited PDF at page 8Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
2e2e3e401c0f21bdca54872cc3cbd651a78eb72f36dfe81d64c042eb47e1f222
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Piping Foot-Left (compatible)
(BLSO-LP) Fits Groups A, B, D, G
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
17
Open source
Open cited PDF at page 17Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
e4cc83dcc249b14c8e1010fc4510565613be73fe9d0811822cd199116ab9cf05
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Free-Motion Quilting Foot (compatible)
(BLG-FM) Fits Group A, B
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
f5c9e70b170bf1e8f41ed722c12c455e3255978d3de424e8f2416224cb1c9f99
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Quilt Binding Foot (compatible)
(BLSA-QBF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
19
Open source
Open cited PDF at page 19Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
706545b8737034c067738f5c51affbf3257b154dc5f4c0f6b694d369a11a14bc
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Zipper Foot (compatible)
(BLG-WZF) Fits Groups A, B, D, G, H, I
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
25
Open source
Open cited PDF at page 25Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
3efdcd64ba0aab82f0537b016ef61d8e0c73b128c6495220f2185621ccf561f0
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Felling Foot (compatible)
(ESG-FF) Fits Groups A, B, D, G, H, J
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
11
Open source
Open cited PDF at page 11Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
e66e3d5363ddf51180f0121b61d8f6cacd5378dbde00625473732f3d028a9fe3
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 1/4" Quilting Foot with Guide (compatible)
(BLSO-QGF) Fits Groups A, B, D, G
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
19
Open source
Open cited PDF at page 19Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
d7bd931a502d0393d086c651563bd24f9e81ddd4ba68c140289182d6e298925f
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Cording Foot - 3-Cord (compatible)
(BLG-CF3) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
9
Open source
Open cited PDF at page 9Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
99349f1d3cc3da8e3f874fd76160c03730e7a17bf13ed24ac2faf1e74040bc77
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Free-Motion Quilting Foot Set (compatible)
(BL-FMQS) Fits Groups B, D, G
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
13
Open source
Open cited PDF at page 13Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
344f2dbc8f4844f36063fe0f7b8ad9a00f1474832ee8dc6d96bd523ad9f44c78
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 1/4" Quilting Foot (compatible)
(BL37-QF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
18
Open source
Open cited PDF at page 18Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
556d90083d710faf7e5aefa32e153e95011c83bfb06f6899395792e81bf31d44
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Roller Foot - Metal (compatible)
(BLSO-RF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
09d805b4d1b1192efcd1f65b5d6a0acffd05cde072f27740f273ff205d4809a6
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 1/4" Quilting Foot (compatible)
(BLSO-QF) Fits Groups A, B, D, G
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
18
Open source
Open cited PDF at page 18Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
61f40297c04db95dca32e06236083a324a1c4cd21f9f4a7368811ba9a8ce57dd
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Double Cording Foot 7-8mm (compatible)
(BLSO-DCF8) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
10
Open source
Open cited PDF at page 10Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
890feceb0835d3be9624f869097823bf71fc60093654f7780aeb7769ee493fd5
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: General Purpose Zigzag Foot (compatible)
(BLG-ZZ) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
14
Open source
Open cited PDF at page 14Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
d1f2dc642d4a0e15ea2c9e7434d23f45efbc9ee34ae71e007786253798d7dfe2
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Double Cording Foot 4-6mm (compatible)
(BLSO-DCF6) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
10
Open source
Open cited PDF at page 10Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
6dfded6bcb65638ae6a586cb7bfbf9775b56054e1a9f3bd3568f96bb3cfddce3
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Bi-Level Foot - Right (compatible)
(BLSO-BRF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
5
Open source
Open cited PDF at page 5Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
5b9a5e0fce07b555261a7a7c0cbe2ca30e50a32149278c8a5cf0a30845659798
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Straight Stitch Foot (compatible)
(BLG-SS) Fits Group B
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
22
Open source
Open cited PDF at page 22Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
7acc2da189da6e624c190831163c53b8bd8a5227efc88f5c332306c5dd133f72
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 5/8" Adjustable Seam Guide Foot (compatible)
(BLSA-SGF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
11
Open source
Open cited PDF at page 11Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
ec02073baec7f937945cab79fc17561903ab2685fe184d1469357374a1a44f02
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Roller Foot (compatible)
(ESG-RF) Fits Groups A, B, D, G, H, I
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
07b1f965fb730338e682537b53121f913e3ceebae0df0e1264a5ab0b0edb5d00
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Monogramming N+ Foot (compatible)
(BLSA-MF) Fits Group A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
15
Open source
Open cited PDF at page 15Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
15f46da0237d17300dd7e461828b1bd03cf57e2916b2fa1b11a9eefa9bf04f8c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Zipper Foot - Teflon (compatible)
(BLDY-TZF) Fits Groups A, B, D, G, H, I
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
26
Open source
Open cited PDF at page 26Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
9b8d2634c898cda40bd4b756da0890a18fba899a24bf4567fda6f58bdb19db6b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Blind Stitch Foot with Guide (compatible)
(BLG-BSGF) Fits Groups A, B
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
6
Open source
Open cited PDF at page 6Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
44f194f5d554a72559f59b135c0c3b43f8a2682429e2e0ef2769e47ad77f5093
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Quilting Leather Roller Foot (compatible)
(BLSO-LRF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
432e5946ce1918763dec5f70e1511530f5cdd119068ffd5673e6211749bbdd4f
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Candlewicking Foot (compatible)
(BLSO-CWF) Fits Groups A, B, D, G
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
8
Open source
Open cited PDF at page 8Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
d103bc080b111ff4553a8fea9c94cb51861e2a29a875cb00a6a4b82f45c34635
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Stitch Guide Foot (compatible)
(BLG-SGF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
22
Open source
Open cited PDF at page 22Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
92c851ada8b115952bc41a64fcd5af31739637b58e7821eaa4dae662a4ffb7fc
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Bias Binder Foot - Adjustable (compatible)
(ESG-ABB) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
4
Open source
Open cited PDF at page 4Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
d37021bb621ce5af670a416dc1bd506bef8bec8c644765254da4b6251dc92c4d
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Open Toe Foot (compatible)
(ESG-OT) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
b2b1b1b8ea4c9794e3b7dcb6c5d233ff2610ce15e2015fb7744dc06c0db3decc
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Edge Joining Foot (compatible)
(ESG-EJF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
10
Open source
Open cited PDF at page 10Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
e37a947b665fa659c682401a2fe2acc9b7979dd89fd2a4f94ed27cba70447329
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Bias Binder Foot (compatible)
(ESG-BB) Fits Groups A, B, D, G, H,
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
4
Open source
Open cited PDF at page 4Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
8fba4dc41ae78eab9709cc75daa9a1c0973f3a5557e02fb9fc73ca8c2caec561
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Stitch-in-the-Ditch Foot (compatible)
(BLSO-SDF) Fits Groups A, B, D, G
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
22
Open source
Open cited PDF at page 22Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
20c19abc17bfb4e7ef65c3e577060e8f365a3b461f7440ab86cc677d012a9db6
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Cording Foot - 3-Cord (compatible)
(ESG-CF3) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
9
Open source
Open cited PDF at page 9Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
43851cba8eac7b41e40043515e261a73cc02f3877abd1b0c0c1bbb40414a826a
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Zipper Foot - Invisible (compatible)
(ESG-IZF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
25
Open source
Open cited PDF at page 25Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
a9b9dd3de4d20a8797cbb5df7b10a8d74e873b2a3ec8f21e3aceb480711920d2
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Border Guide Foot (compatible)
(BLDY-BGF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
6
Open source
Open cited PDF at page 6Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
8939973519e63908acf6b958c88e2aa289bbadf7b650cf2e3e3ddfcf7299ee93
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Pearl and Piping Foot (compatible)
(ESG-PP) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
17
Open source
Open cited PDF at page 17Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
283a9e75b1982946d3fd3441963f56b128e3299d028e2e028b16f1929a819fab
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Open Toe Foot (compatible)
(BL66-OT) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
71d989cd003afa17aaa5f0a9050571a4c10e1c973bdf23290cee9eaf40209c9b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Cording Foot - 5-Cord (compatible)
(ESG-CF5) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
9
Open source
Open cited PDF at page 9Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
7711ac6f918758ad44804fb2e7069d84f691fd66bdad1050d846fc5c579e5316
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Hemmer Foot 4mm (compatible)
(BLA-HF4) Fits Models: Groups A, B, D, G, H, I
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
15
Open source
Open cited PDF at page 15Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
5e61d414e0f6c1d23d506d73e9ba5918a0e43460284636756740456399fba472
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Straight Stitch Foot (compatible)
(ESG-SSL) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
23
Open source
Open cited PDF at page 23Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
386a94fa3373fb61f830af9f4b7708a084bfe27c6024a01cf5ef9423c3aa775e
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Blind Hem Foot (compatible)
(BL66-BLH) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
5
Open source
Open cited PDF at page 5Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
eae2007917af10d06738e7972e6631ed62821e507f65b65e4263be3bdf0a2beb
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 1/4" Quilting Foot (compatible)
(ESG-QF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
18
Open source
Open cited PDF at page 18Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
9d505ba03200ffa8794cd0511d46b11800a3bd846204c85c06576072d1e14705
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Fringe/Looping Foot (compatible)
(ESG-LF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
13
Open source
Open cited PDF at page 13Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
f1316dfa67eb5b4787443e1f5db4d67e17193fc5ebb27edf1b5f8d55bdc99335
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Ruler Foot - Low Shank (compatible)
(BL-LOTRF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
21
Open source
Open cited PDF at page 21Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
9d3cdc5176ad5536fc3b465eaacb50a49023ab4a584f85503068909cd90e7dc4
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Bi-Level Foot - Left (compatible)
(BLSO-BLF) Fits Groups A, B, D, G, H
Document
Baby Lock 2025 accessory brochure
Issuer
Baby Lock
Extraction
native
PDF page
5
Open source
Open cited PDF at page 5Open OEM source or support page
Advanced technical receipt
Asset SHA-256
558d3860e61aced8ff65613a0faa552289094dda731a8b1e02f6daeb674bdb0e
Locator
7b22dd77093ba092736eb8ec1c4572adac62547a96ec20408240d68dbcb3b2d5
Destination status
direct_pdf

What is supported, and what remains open?

1 supported answers and 9 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.

Unresolved owner questions (2)
  • Which standardized shank class applies?: Not established — Not yet verified: The reviewed exact manual pages do not name a standardized or low shank class.
  • Which standardized bobbin class applies?: Not established — Not yet verified: The exact BLTY passage does not name a standardized bobbin class or system.

Report a correction or share an OEM source

Advanced provenance and dataset receipt

Public snapshot a1cc1aceef228fcf33329e37165ab888ce5b9fe3f13eb56967ae0fbf41d8d8a7

Catalog e156281c7d3048027b5ac89e7476be8f54dd5a9309505e96260b0455d3cd2a7e · exact native quotes only · dossier method sewgraph-model-dossier-v2