SewGraph

bernette · verified physical machine

b70 DECO

View cited identity evidence · 2 unique proof passages

Jump to: Proof E1, Proof E2

verified exact machine · 2/3 core systems

Identity verified · evidence for each answer

Using and maintaining this machine

Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.

Presser feet and adapters

Hopper embroidery foot

conditional

Hopper Embroidery Foot JX attaches to the presser-foot bar with its spring over the needle-clamp screw and is secured by the screw.

Source evidence · 1 unique proof passage: Profile Proof E1

Embroidery foot

conditional

Embroidery Foot JL attaches from the back to the presser-foot bar and is secured by the screw.

Source evidence · 1 unique proof passage: Profile Proof E1

Needles and threading

System

conditional

130/705H

Source evidence · 1 unique proof passage: Profile Proof E2

Insertion orientation

conditional

Insert fully with the flat side to the back and tighten the screw.

Source evidence · 1 unique proof passage: Profile Proof E2

Bobbins and hook

Insertion path

conditional

Open the cover by pushing the handle right; insert an evenly wound bobbin, pull the thread into slit 1, and press the bobbin gently.

Source evidence · 1 unique proof passage: Profile Proof E3

Insertion orientation

conditional

Insert with the thread wound counterclockwise.

Source evidence · 1 unique proof passage: Profile Proof E3

Features and specifications

Maximum embroidery speed

conditional

850 stitches per minute

Source evidence · 1 unique proof passage: Profile Proof E4

Dimensions without embroidery module

conditional

509 × 200 × 315 mm (W × D × H)

Source evidence · 1 unique proof passage: Profile Proof E4

Dimensions with embroidery module

conditional

710 × 475 × 315 mm (W × D × H)

Source evidence · 1 unique proof passage: Profile Proof E4

Weight

conditional

Machine 8.14 kg; embroidery module 3.65 kg

Source evidence · 1 unique proof passage: Profile Proof E4

Energy consumption

conditional

90 W

Source evidence · 1 unique proof passage: Profile Proof E4

Input voltage

conditional

100–240 V

Source evidence · 1 unique proof passage: Profile Proof E4

Sources for the owner answers above
Official OEM PDF

What this passage supports

  • Hopper embroidery foot: Hopper Embroidery Foot JX attaches to the presser-foot bar with its spring over the needle-clamp screw and is secured by the screw.
  • Embroidery foot: Embroidery Foot JL attaches from the back to the presser-foot bar and is secured by the screw.
Hopper embroidery Foot (JX) spring (3) is over Embroidery Foot (JL) from the back presser foot bar and tighten
Document
bernette b70 DECO instruction manual
Issuer
bernette
Extraction
Native document text
PDF page
29
Open source
Open cited PDF at page 29Open OEM source or support page
Advanced technical receipt
Asset SHA-256
a118098430c59a486a4110e81995d3738f627a92fa7c10d15e0abca26d55de33
Locator
2e6f7be65121448121ef104c8d37cf7628af4e798f2baf4e220f63cac5c9a436
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • System: 130/705H
  • Insertion orientation: Insert fully with the flat side to the back and tighten the screw.
Use the needle system 130/705H. flat side to the back as far up as it will go
Document
bernette b70 DECO instruction manual
Issuer
bernette
Extraction
Native document text
PDF page
76
Open source
Open cited PDF at page 76Open OEM source or support page
Advanced technical receipt
Asset SHA-256
a118098430c59a486a4110e81995d3738f627a92fa7c10d15e0abca26d55de33
Locator
38d0c18b9db5800feb945d759d24529f5a684f9e682f948ae50f751510fb5bd1
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Maximum embroidery speed: 850 stitches per minute
  • Dimensions without embroidery module: 509 × 200 × 315 mm (W × D × H)
  • Dimensions with embroidery module: 710 × 475 × 315 mm (W × D × H)
  • Weight: Machine 8.14 kg; embroidery module 3.65 kg
  • Energy consumption: 90 W
  • Input voltage: 100–240 V
Embroidery Mode: 850 Without Embroidery Module: 509 x With Embroidery Module: 710 x Machine: 8.14 Energy Consumption 90 Input Voltage 100 – 240
Document
bernette b70 DECO instruction manual
Issuer
bernette
Extraction
Native document text
PDF page
82
Open source
Open cited PDF at page 82Open OEM source or support page
Advanced technical receipt
Asset SHA-256
a118098430c59a486a4110e81995d3738f627a92fa7c10d15e0abca26d55de33
Locator
aec468cedc5989e08a414cb89cb1b8109c0209899d2570c2516dc72f776ad538
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Insertion path: Open the cover by pushing the handle right; insert an evenly wound bobbin, pull the thread into slit 1, and press the bobbin gently.
  • Insertion orientation: Insert with the thread wound counterclockwise.
Only use evenly wound bobbins. push the handle to the right thread is wound counterclockwise Pull the thread into the slit (1). Press gently on the bobbin.
Document
bernette b70 DECO instruction manual
Issuer
bernette
Extraction
Native document text
PDF page
36
Open source
Open cited PDF at page 36Open OEM source or support page
Advanced technical receipt
Asset SHA-256
a118098430c59a486a4110e81995d3738f627a92fa7c10d15e0abca26d55de33
Locator
dd8e2b0302de2c33bfadb650e8c6869120166e9d5ddd577ecfc4fb1042b044e1
Destination status
direct_pdf
Machine facets and OEM groups

Cited machine facets

Identity and compatibility badges

Identity families, physical traits, and OEM accessory groups stay separate. A group badge applies only to its named program and domains.

presser foot mountscrew on embroidery foot barneedle system130 · 705HOEM group · accessory, bobbin, needle, parts, presser footbernette Accessory Category: bernette Category G1
Detailed specifications, compatible parts, and source library

Evidence coverage

Core answers and cited items

Machine category

embroidery only

View machine-type evidence · 1 unique proof passage: Proof E3

View proof JSONReport this claim

Core domains answered: needle, presser foot

Domains with cited compatible items: None yet

bobbinReviewed — not established
hoop frameCited evidence available
needleCore answer answered
presser footCore answer answered

Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.

Specifications

Documented machine facts

Multiple cited representations for one field share one row. SewGraph preserves every value and exact proof passage; it does not guess which representation is “raw” or “normalized” when the public projection does not label that distinction.

bobbin

bobbin orientationcounterclockwise

View exact evidence · 1 unique proof passage: Proof E4

presser foot

presser foot mountscrew_on_embroidery_foot_bar

View exact evidence · 1 unique proof passage: Proof E5

needle

needle system130/705H

View exact evidence · 1 unique proof passage: Proof E6

hoop frame

hoop systemclick-in embroidery-module hoop interface

View exact evidence · 1 unique proof passage: Proof E7

OEM compatibility programs

Documented group memberships

Group codes are namespaced to the issuing OEM program and apply only to the cited domains. They are not machine series and do not prove compatibility outside those domains.

bernette Category G1

bernette Accessory Category · code G1

Applies to: accessory, bobbin, needle, parts, presser foot

View machine-to-group evidence · 1 unique proof passage: Proof E8

View proof JSONReport this claim

Official source library

Documents used on this page

Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.

bernette 70 DECO brochure

brochure

Open official source destination · 1 unique proof passage: Proof E2

bernette b70 DECO instruction manual

instruction

Open official source destination · 1 unique proof passage: Proof E4

bernette accessories catalog 2024

accessory compatibility

Open official source destination · 1 unique proof passage: Proof E1

Evidence library

8 exact proof passages from 3 OEM documents

Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.

Open exact proof passages · 8 unique proof passages
Official OEM PDF

What this passage proves

  • Identity — preferred display name: b70 DECO
  • Identity — model code: b70 DECO
Category G 1 b70 DECO 2 b77 3 b79
Document
bernette accessories catalog 2024
Issuer
bernette
Extraction
native
PDF page
3
Open source
Open cited PDF at page 3Open OEM source or support page
Advanced technical receipt
Asset SHA-256
21f2395d18aa5ac2d086e55f638f95307aae1c7ceb0fc8b689ad60742073dbd0
Locator
dbc266b064becb7f4f9acf3e92f5e24ec1e2656558fe2f444a962fe750872b03
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: b70 DECO
The b70 DECO is a real specialist. As a pure embroidery
Document
bernette 70 DECO brochure
Issuer
bernette
Extraction
native
PDF page
5
Open source
Open cited PDF at page 5Open OEM source or support page
Advanced technical receipt
Asset SHA-256
873d5e3e70bb5ac6ad484038b029f7fd79cc38e179308fb2d4611606057d60f0
Locator
88b1b7c51ef767750b4f6486b83464b44be9a1956d7c4ae1b74dff0a2fa39fc6
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Machine category — machine type: embroidery only
The b70 DECO is a real specialist. As a pure embroidery machine with no sewing function, it offers everything
Document
bernette 70 DECO brochure
Issuer
bernette
Extraction
native
PDF page
5
Open source
Open cited PDF at page 5Open OEM source or support page
Advanced technical receipt
Asset SHA-256
873d5e3e70bb5ac6ad484038b029f7fd79cc38e179308fb2d4611606057d60f0
Locator
5ba50648f1d27db8663de07789e23eddb21f7261353086db95babd320d2474fe
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • bobbin fact — bobbin orientation: counterclockwise
Insert a new bobbin so that the thread is wound counterclockwise.
Document
bernette b70 DECO instruction manual
Issuer
bernette
Extraction
native
PDF page
36
Open source
Open cited PDF at page 36Open OEM source or support page
Advanced technical receipt
Asset SHA-256
a118098430c59a486a4110e81995d3738f627a92fa7c10d15e0abca26d55de33
Locator
ec09efe30ba46ea2817c66c90844bd8c41cb8fc5a1db5e5f29de612f7a4ced2d
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • presser foot fact — presser foot mount: screw_on_embroidery_foot_bar
  • Presser foot answer — screw_on_embroidery_foot_bar
Attach the Embroidery Foot (JL) from the back with the index finger to the presser foot bar and tighten the screw (1).
Document
bernette b70 DECO instruction manual
Issuer
bernette
Extraction
native
PDF page
29
Open source
Open cited PDF at page 29Open OEM source or support page
Advanced technical receipt
Asset SHA-256
a118098430c59a486a4110e81995d3738f627a92fa7c10d15e0abca26d55de33
Locator
2d130a295053382c7ae13fdc5c1c7cf9c8a80a764a4b2d111a37e2e213be250a
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • needle fact — needle system: 130/705H
  • Needle answer — 130/705H
Use the needle system 130/705H.
Document
bernette b70 DECO instruction manual
Issuer
bernette
Extraction
native
PDF page
76
Open source
Open cited PDF at page 76Open OEM source or support page
Advanced technical receipt
Asset SHA-256
a118098430c59a486a4110e81995d3738f627a92fa7c10d15e0abca26d55de33
Locator
898a1a738dc6b5f8bdc3ae4bbf0b94ec3dcc40b92d9906eae2500c20f94d7e16
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • hoop frame fact — hoop system: click-in embroidery-module hoop interface
Attaching the Hoop > Raise the needle. > Raise the embroidery foot. > Position the hoop below the embroidery foot. > Push the embroidery hoop into the embroidery module until it clicks into place. – The hoop is attached.
Document
bernette b70 DECO instruction manual
Issuer
bernette
Extraction
native
PDF page
41
Open source
Open cited PDF at page 41Open OEM source or support page
Advanced technical receipt
Asset SHA-256
a118098430c59a486a4110e81995d3738f627a92fa7c10d15e0abca26d55de33
Locator
042a1225daa3dbdf45c09787f54600182c74cdb8fc6d2c60935f9f7d984b404d
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • OEM program membership — bernette Accessory Category: bernette Category G1
Category G 1 b70 DECO 2 b77 3 b79
Document
bernette accessories catalog 2024
Issuer
bernette
Extraction
native
PDF page
3
Open source
Open cited PDF at page 3Open OEM source or support page
Advanced technical receipt
Asset SHA-256
21f2395d18aa5ac2d086e55f638f95307aae1c7ceb0fc8b689ad60742073dbd0
Locator
f0912ec958ab5c213278a1e61386cdc96af17231a1bb7dd1abb786a75265383f
Destination status
direct_pdf

What is supported, and what remains open?

0 supported answers and 12 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.

Unresolved owner questions (2)
  • Mount or fit: Not established — Not yet verified: These exact supplied-foot procedures do not establish a standardized shank class or third-party fit.
  • Class or system: Not established — Not yet verified: The reviewed page does not establish a bobbin class, part number, dimensions or unrestricted substitute.

Report a correction or share an OEM source

Advanced provenance and dataset receipt

Public snapshot a1cc1aceef228fcf33329e37165ab888ce5b9fe3f13eb56967ae0fbf41d8d8a7

Catalog e156281c7d3048027b5ac89e7476be8f54dd5a9309505e96260b0455d3cd2a7e · exact native quotes only · dossier method sewgraph-model-dossier-v2