SewGraph

bernette · verified physical machine

b79

View cited identity evidence · 3 unique proof passages

Jump to: Proof E1, Proof E2, Proof E3

verified exact machine · 2/3 core systems

Identity verified · evidence for each answer

Using and maintaining this machine

Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.

Presser feet and adapters

Knee lifter

conditional

Move the knee lifter right to raise the presser foot; release it slowly to lower the foot.

Source evidence · 1 unique proof passage: Profile Proof E1

Sole attachment

conditional

Position the sole pin below the shaft groove and push the sole upward until it engages.

Source evidence · 1 unique proof passage: Profile Proof E1

Needles and threading

System

conditional

130/705H

Source evidence · 1 unique proof passage: Profile Proof E2

Insertion orientation

conditional

Insert fully with the flat side to the back and tighten the screw.

Source evidence · 1 unique proof passage: Profile Proof E2

Bobbins and hook

Insertion path

conditional

Open the cover by pushing the handle right; insert an evenly wound bobbin, pull the thread into slit 1, press the bobbin gently, and follow the arrow markings into the thread guide.

Source evidence · 1 unique proof passage: Profile Proof E3

Insertion orientation

conditional

Insert with the thread wound anti-clockwise.

Source evidence · 1 unique proof passage: Profile Proof E3

Features and specifications

Maximum sewing speed

conditional

1000 stitches per minute

Source evidence · 1 unique proof passage: Profile Proof E4

Maximum embroidery speed

conditional

850 stitches per minute

Source evidence · 1 unique proof passage: Profile Proof E4

Dimensions without embroidery module

conditional

509 × 200 × 315 mm (W × D × H)

Source evidence · 1 unique proof passage: Profile Proof E4

Dimensions with embroidery module

conditional

710 × 475 × 315 mm (W × D × H)

Source evidence · 1 unique proof passage: Profile Proof E4

Weight

conditional

Machine 9.34 kg; accessory box 0.46 kg; embroidery module 3.65 kg

Source evidence · 1 unique proof passage: Profile Proof E4

Energy consumption

conditional

90 W

Source evidence · 1 unique proof passage: Profile Proof E4

Input voltage

conditional

100–240 V

Source evidence · 1 unique proof passage: Profile Proof E4

Sources for the owner answers above
Official OEM PDF

What this passage supports

  • Knee lifter: Move the knee lifter right to raise the presser foot; release it slowly to lower the foot.
  • Sole attachment: Position the sole pin below the shaft groove and push the sole upward until it engages.
knee lifter shaft groove is above the presser push the new presser foot sole upward until it engages
Document
bernette 79 user manual
Issuer
bernette
Extraction
Native document text
PDF page
32
Open source
Open cited PDF at page 32Open OEM source or support page
Advanced technical receipt
Asset SHA-256
68004dc9ded0c69c802a6bbca4d4543765728765fd2d7111329fc84538e1aedb
Locator
4acb499cf4f643dd6a7c60909505431907b0a4f5fc33d3abb34f36f9eba864b9
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • System: 130/705H
  • Insertion orientation: Insert fully with the flat side to the back and tighten the screw.
Use the needle system 130/705H. flat side to the back as far up
Document
bernette 79 user manual
Issuer
bernette
Extraction
Native document text
PDF page
148
Open source
Open cited PDF at page 148Open OEM source or support page
Advanced technical receipt
Asset SHA-256
68004dc9ded0c69c802a6bbca4d4543765728765fd2d7111329fc84538e1aedb
Locator
9328cb1573a7ce1c59af67cdc45fe9aa8c4a59c4c6fe9b2fe98e0ee46bcb86f7
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Insertion path: Open the cover by pushing the handle right; insert an evenly wound bobbin, pull the thread into slit 1, press the bobbin gently, and follow the arrow markings into the thread guide.
  • Insertion orientation: Insert with the thread wound anti-clockwise.
Only use evenly wound bobbins. push the handle to the right thread is wound anti-clockwise Pull the thread into the slit (1). Press gently on the bobbin. Follow the arrow markings
Document
bernette 79 user manual
Issuer
bernette
Extraction
Native document text
PDF page
44
Open source
Open cited PDF at page 44Open OEM source or support page
Advanced technical receipt
Asset SHA-256
68004dc9ded0c69c802a6bbca4d4543765728765fd2d7111329fc84538e1aedb
Locator
c5786f812073673f2ee841a6ad97b7585568f7329a315fc02cd9154d059be675
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Maximum sewing speed: 1000 stitches per minute
  • Maximum embroidery speed: 850 stitches per minute
  • Dimensions without embroidery module: 509 × 200 × 315 mm (W × D × H)
  • Dimensions with embroidery module: 710 × 475 × 315 mm (W × D × H)
  • Weight: Machine 9.34 kg; accessory box 0.46 kg; embroidery module 3.65 kg
  • Energy consumption: 90 W
  • Input voltage: 100–240 V
Sewing Mode: 1000 Embroidery Mode: 850 Without Embroidery Module: 509 × With Embroidery Module: 710 x Machine: 9.34 Energy Consumption 90 Input Voltage 100 – 240
Document
bernette 79 user manual
Issuer
bernette
Extraction
Native document text
PDF page
156
Open source
Open cited PDF at page 156Open OEM source or support page
Advanced technical receipt
Asset SHA-256
68004dc9ded0c69c802a6bbca4d4543765728765fd2d7111329fc84538e1aedb
Locator
d3dab2d8c5690f57eb44820174b930ee0bf8734a4487ea9990058641c233beae
Destination status
direct_pdf
Machine facets and OEM groups

Cited machine facets

Identity and compatibility badges

Identity families, physical traits, and OEM accessory groups stay separate. A group badge applies only to its named program and domains.

needle system130 · 705Hpresser foot mountsnap on sole pinOEM group · accessory, bobbin, needle, parts, presser footbernette Accessory Category: bernette Category G3
Detailed specifications, compatible parts, and source library

Evidence coverage

Core answers and cited items

Machine category

domestic sewing embroidery

View machine-type evidence · 1 unique proof passage: Proof E4

View proof JSONReport this claim

Core domains answered: needle, presser foot

Domains with cited compatible items: None yet

bobbinReviewed — not established
needleCore answer answered
presser footCore answer answered

Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.

Specifications

Documented machine facts

Multiple cited representations for one field share one row. SewGraph preserves every value and exact proof passage; it does not guess which representation is “raw” or “normalized” when the public projection does not label that distinction.

bobbin

bobbin orientationtop_loading_anti_clockwise

View exact evidence · 1 unique proof passage: Proof E5

needle

needle system130/705H

View exact evidence · 1 unique proof passage: Proof E6

presser foot

presser foot mountsnap_on_sole_pin

View exact evidence · 1 unique proof passage: Proof E7

OEM compatibility programs

Documented group memberships

Group codes are namespaced to the issuing OEM program and apply only to the cited domains. They are not machine series and do not prove compatibility outside those domains.

bernette Category G3

bernette Accessory Category · code G3

Applies to: accessory, bobbin, needle, parts, presser foot

View machine-to-group evidence · 1 unique proof passage: Proof E8

View proof JSONReport this claim

Official source library

Documents used on this page

Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.

bernette 79 user manual

instruction

Open official source destination · 1 unique proof passage: Proof E2

bernette accessories catalog 2025

accessory compatibility

Open official source destination · 1 unique proof passage: Proof E3

bernette accessories catalog 2024

accessory compatibility

Open official source destination · 1 unique proof passage: Proof E1

Evidence library

8 exact proof passages from 3 OEM documents

Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.

Open exact proof passages · 8 unique proof passages
Official OEM PDF

What this passage proves

  • Identity — model code: b79
  • Identity — preferred display name: b79
b79
Document
bernette accessories catalog 2024
Issuer
bernette
Extraction
native
PDF page
3
Open source
Open cited PDF at page 3Open OEM source or support page
Advanced technical receipt
Asset SHA-256
21f2395d18aa5ac2d086e55f638f95307aae1c7ceb0fc8b689ad60742073dbd0
Locator
99fcf445af4659a04b710d4edf755da0453e0c1c33221cf4606217111e713e36
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: b79
The bernette b79 provides a solidly freearm which offers a lot of space for large project on the right of the needle.
Document
bernette 79 user manual
Issuer
bernette
Extraction
native
PDF page
30
Open source
Open cited PDF at page 30Open OEM source or support page
Advanced technical receipt
Asset SHA-256
68004dc9ded0c69c802a6bbca4d4543765728765fd2d7111329fc84538e1aedb
Locator
8cf379f7db9ffb012ed2518155917e1d13eb90f784e66362147f8e59bf688810
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: b79
Presser Feet Set b77/b79 This set for the sewing
Document
bernette accessories catalog 2025
Issuer
bernette
Extraction
native
PDF page
27
Open source
Open cited PDF at page 27
Advanced technical receipt
Asset SHA-256
8c6e3d13644219ca62ca16092f246db2cdea2a468e806b54035e446bd4eb9720
Locator
f73d6f01fdcb9a98d1460b1a821df561bb7d21cacce91142fb9e5f93bb44bb94
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Machine category — machine type: domestic sewing embroidery
| Machine Overview Sewing and Embroidery Machines Category G 1 b70 DECO 2 b77 3 b79
Document
bernette accessories catalog 2024
Issuer
bernette
Extraction
native
PDF page
3
Open source
Open cited PDF at page 3Open OEM source or support page
Advanced technical receipt
Asset SHA-256
21f2395d18aa5ac2d086e55f638f95307aae1c7ceb0fc8b689ad60742073dbd0
Locator
5c60c234e35017b3517695957d2c808006cf8750a4b1222f99f4c71c65349a5b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • bobbin fact — bobbin orientation: top_loading_anti_clockwise
To open the bobbin cover, push the handle to the right and remove the bobbin cover. > Insert a new bobbin so that the thread is wound anti-clockwise.
Document
bernette 79 user manual
Issuer
bernette
Extraction
native
PDF page
44
Open source
Open cited PDF at page 44Open OEM source or support page
Advanced technical receipt
Asset SHA-256
68004dc9ded0c69c802a6bbca4d4543765728765fd2d7111329fc84538e1aedb
Locator
ee0974ac00b9a98de7749f0839595422d0a07914fd6d3a49c768ac7f4a1bf41d
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • needle fact — needle system: 130/705H
  • Needle answer — 130/705H
Use the needle system 130/705H.
Document
bernette 79 user manual
Issuer
bernette
Extraction
native
PDF page
148
Open source
Open cited PDF at page 148Open OEM source or support page
Advanced technical receipt
Asset SHA-256
68004dc9ded0c69c802a6bbca4d4543765728765fd2d7111329fc84538e1aedb
Locator
f5a4dfcf42027840bd48dfc758fcfa8dd5a518c56bd6afba087a9c2544d21e77
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • presser foot fact — presser foot mount: snap_on_sole_pin
  • Presser foot answer — snap_on_sole_pin
Attaching the Presser Foot Sole > Raise the presser foot (1). > Place the presser foot sole (2) under the shaft groove (3) so that the shaft groove is above the presser foot sole pin (4). > Then push the new presser foot sole upward until it engages.
Document
bernette 79 user manual
Issuer
bernette
Extraction
native
PDF page
32
Open source
Open cited PDF at page 32Open OEM source or support page
Advanced technical receipt
Asset SHA-256
68004dc9ded0c69c802a6bbca4d4543765728765fd2d7111329fc84538e1aedb
Locator
3fa91a51883f49bc2a29148c3e89d13096d4557c06d60e5aecfaa975a50beede
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • OEM program membership — bernette Accessory Category: bernette Category G3
Category G 1 b70 DECO 2 b77 3 b79
Document
bernette accessories catalog 2024
Issuer
bernette
Extraction
native
PDF page
3
Open source
Open cited PDF at page 3Open OEM source or support page
Advanced technical receipt
Asset SHA-256
21f2395d18aa5ac2d086e55f638f95307aae1c7ceb0fc8b689ad60742073dbd0
Locator
7e062f9cf2ad2136451d0ed58acd0a52f2cfb0552f0111a80aa4a32fcf7fcdac
Destination status
direct_pdf

What is supported, and what remains open?

0 supported answers and 13 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.

Unresolved owner questions (2)
  • Mount or fit: Not established — Not yet verified: The sole procedure does not establish a standardized shank class, universal fit or third-party fit.
  • Class or system: Not established — Not yet verified: The reviewed page does not establish a bobbin class, part number, dimensions or unrestricted substitute.

Report a correction or share an OEM source

Advanced provenance and dataset receipt

Public snapshot a1cc1aceef228fcf33329e37165ab888ce5b9fe3f13eb56967ae0fbf41d8d8a7

Catalog e156281c7d3048027b5ac89e7476be8f54dd5a9309505e96260b0455d3cd2a7e · exact native quotes only · dossier method sewgraph-model-dossier-v2