SewGraph

bernina · verified physical machine

aurora 450

Cited model code 450

View cited identity evidence · 4 unique proof passages

Jump to: Proof E1, Proof E2, Proof E4, Proof E5

verified exact machine · 1/3 core systems

Identity verified · evidence for each answer

Using and maintaining this machine

Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.

Bobbins and hook

Insertion direction

supported

Insert the bobbin with thread winding clockwise; pull the thread into the slit and left under the spring. The bobbin must turn clockwise.

Source evidence · 1 unique proof passage: Profile Proof E1

Case orientation

conditional

Hold the case latch with the case opening pointing up; insert until it clicks into place and close the bobbin cover.

  • Switch power off before changing the bobbin case; retain this model's orientation. The page's pictures depict the aurora 450 only.

Source evidence · 1 unique proof passage: Profile Proof E2

Needles and threading

System

supported

The OEM manual requires needle system 130/705 H.

Source evidence · 1 unique proof passage: Profile Proof E3

Insertion orientation

supported

With power off, insert the needle fully upward with its flat side facing the back, then tighten the clamp screw.

Source evidence · 1 unique proof passage: Profile Proof E4

Replacement interval

conditional

The manual recommends replacing the needle when starting a new sewing project, checking its condition and replacing it regularly.

  • No fixed hourly service interval is stated; a defective needle can damage the fabric and machine.

Source evidence · 1 unique proof passage: Profile Proof E5

Presser feet and adapters

Attachment mount mechanism

conditional

Raise the needle and presser foot and switch power off. Raise the clamping lever to remove the foot; guide the replacement upwards over the cone and press the clamping lever down.

  • This describes the native attachment, not a standardized shank type, adapter or universal accessory fit.

Source evidence · 1 unique proof passage: Profile Proof E6

Sources for the owner answers above
Official OEM PDF

What this passage supports

  • Attachment mount mechanism: Raise the needle and presser foot and switch power off. Raise the clamping lever to remove the foot; guide the replacement upwards over the cone and press the clamping lever down.
Changing the presser foot raise the needle and presser foot turn power switch to «0» (off) raise the clamping lever remove the presser foot Attaching the presser foot guide the foot upwards over the cone press the clamping lever down
Document
BERNINA aurora 430 / 440 QE / 450 user manual (EN)
Issuer
BERNINA
Extraction
Visually verified transcription of a scanned page
Visual verification
Checked 2026-09-09T21:40:49Z. The page image and transcription are hash-bound in the evidence record.
PDF page
17
Open source
Open cited PDF at page 17
Advanced technical receipt
Asset SHA-256
f338ae3c493ecd8d51102dba9911cc6bb7852d3af5911cdf94b4c2d373d097b4
Locator
1e9569358a8235d49f00b79f43d5e7ffb77df4e0b73c241f25b743efaac63fd7
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Insertion orientation: With power off, insert the needle fully upward with its flat side facing the back, then tighten the clamp screw.
Removing the needle raise the needle turn power switch to «0» (off) Inserting the needle flat side of needle to the back insert the needle as far as it will go tighten the needle clamp screw
Document
BERNINA aurora 430 / 440 QE / 450 user manual (EN)
Issuer
BERNINA
Extraction
Visually verified transcription of a scanned page
Visual verification
Checked 2026-09-09T21:40:49Z. The page image and transcription are hash-bound in the evidence record.
PDF page
16
Open source
Open cited PDF at page 16
Advanced technical receipt
Asset SHA-256
f338ae3c493ecd8d51102dba9911cc6bb7852d3af5911cdf94b4c2d373d097b4
Locator
4e5c735f03519f93ffe65390e2762eedbb15e915bf7b768d09f76777fe0a51f7
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Case orientation: Hold the case latch with the case opening pointing up; insert until it clicks into place and close the bobbin cover.
To remove the bobbin case raise the needle turn power switch to «0» (off) To insert the bobbin case hold the bobbin case latch aurora 430 / 440 QE: the finger on the case should point upwards aurora 450: bobbin case opening points up insert so that it clicks into place close the bobbin cover * pictures = aurora 450
Document
BERNINA aurora 430 / 440 QE / 450 user manual (EN)
Issuer
BERNINA
Extraction
Visually verified transcription of a scanned page
Visual verification
Checked 2026-09-09T21:40:49Z. The page image and transcription are hash-bound in the evidence record.
PDF page
16
Open source
Open cited PDF at page 16
Advanced technical receipt
Asset SHA-256
f338ae3c493ecd8d51102dba9911cc6bb7852d3af5911cdf94b4c2d373d097b4
Locator
79a7d91c565a51f0f9454d73567ee3c9169cf7b49cb22c12f54c52d7c776c7cf
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • System: The OEM manual requires needle system 130/705 H.
BERNINA requires needle system 130/705 H.
Document
BERNINA aurora 430 / 440 QE / 450 user manual (EN)
Issuer
BERNINA
Extraction
Visually verified transcription of a scanned page
Visual verification
Checked 2026-09-09T21:40:49Z. The page image and transcription are hash-bound in the evidence record.
PDF page
18
Open source
Open cited PDF at page 18
Advanced technical receipt
Asset SHA-256
f338ae3c493ecd8d51102dba9911cc6bb7852d3af5911cdf94b4c2d373d097b4
Locator
89479a4f6b1af7ac0de41493e479861f65186cd570b7fd57edbcc0c30053a38a
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Insertion direction: Insert the bobbin with thread winding clockwise; pull the thread into the slit and left under the spring. The bobbin must turn clockwise.
Insert the bobbin so that the thread winds clockwise. Pull the thread into the slit, then to the left under the spring. The bobbin must turn clockwise. The bobbins are inserted and threaded in the same way in the aurora models 430, 440 QE and 450.
Document
BERNINA aurora 430 / 440 QE / 450 user manual (EN)
Issuer
BERNINA
Extraction
Visually verified transcription of a scanned page
Visual verification
Checked 2026-09-09T21:40:49Z. The page image and transcription are hash-bound in the evidence record.
PDF page
15
Open source
Open cited PDF at page 15
Advanced technical receipt
Asset SHA-256
f338ae3c493ecd8d51102dba9911cc6bb7852d3af5911cdf94b4c2d373d097b4
Locator
9f36a5b343b3b597bcf428230907248a4ad16895599d4e2581e7f936654b5203
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Replacement interval: The manual recommends replacing the needle when starting a new sewing project, checking its condition and replacing it regularly.
The following are the guidelines: replace needle when starting a new sewing project. The needle condition should be checked and the needle replaced regularly. A defective needle not only damages the fabric but also the sewing computer.
Document
BERNINA aurora 430 / 440 QE / 450 user manual (EN)
Issuer
BERNINA
Extraction
Visually verified transcription of a scanned page
Visual verification
Checked 2026-09-09T21:40:49Z. The page image and transcription are hash-bound in the evidence record.
PDF page
18
Open source
Open cited PDF at page 18
Advanced technical receipt
Asset SHA-256
f338ae3c493ecd8d51102dba9911cc6bb7852d3af5911cdf94b4c2d373d097b4
Locator
ac67e37cc756936c93f538cfb9e097ce777763600c876a16e153b9ef43db8ed5
Destination status
direct_pdf
Machine facets and OEM groups

Cited machine facets

Identity and compatibility badges

Identity families, physical traits, and OEM accessory groups stay separate. A group badge applies only to its named program and domains.

Product lineauroraneedle system130 · 705HOEM group · accessory, presser footBERNINA Accessory Category: BERNINA Category COEM group · accessory, presser footBERNINA Accessory Category: BERNINA Category C3
Detailed specifications, compatible parts, and source library

Identity

Names in official sources

Model codes, marketing names, and series are separate cited facts. Search-only spelling variants are not presented as aliases.

Product line

aurora

View product line evidence · 1 unique proof passage: Proof E3

Evidence coverage

Core answers and cited items

Machine category: Not yet established

Core domains answered: needle

Domains with cited compatible items: presser foot (77)

Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.

Specifications

Documented machine facts

Multiple cited representations for one field share one row. SewGraph preserves every value and exact proof passage; it does not guess which representation is “raw” or “normalized” when the public projection does not label that distinction.

needle

needle system130/705H

View exact evidence · 1 unique proof passage: Proof E6

Parts & accessories

92 documented relationships

A two-hop result joins the machine’s official accessory-group membership to the OEM part matrix. Open the evidence to inspect both hops.

92 relationships shown

presser foot · 77

Edgestitch Foot #10/10C/10D
008 455 74 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E9

View proof JSONReport this claim
Jeans Foot #8/8D
008 453 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E11

View proof JSONReport this claim
Adapter Shank #75/77
032 702 71 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E12

View proof JSONReport this claim
Roll and Shell Hemmer #68/69
008 486 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E14

View proof JSONReport this claim
Pintuck Foot #30/31/32/33
008 470 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E16

View proof JSONReport this claim
Straight Stitch Hemmer #62/64
008 482 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E17

View proof JSONReport this claim
Pintuck Foot #30/31/32/33
008 473 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E18

View proof JSONReport this claim
Bulky Overlock Foot #12/12C
008 457 74 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E19

View proof JSONReport this claim
Edgestitch Foot #10/10C/10D
008 877 75 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E21

View proof JSONReport this claim
Embroidery Foot #26/26L
107 779 70 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E23

View proof JSONReport this claim
Overlock Foot #2/2A
008 446 74 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E24

View proof JSONReport this claim
Double Cord Foot #59C/60C
032 370 72 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E25

View proof JSONReport this claim
Overlock Foot #2/2A
033 330 72 01
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E27

View proof JSONReport this claim
Cordonnet Foot #11
008 456 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E28

View proof JSONReport this claim
Adjustable Ruler Foot #72/72S
105 803 70 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E29

View proof JSONReport this claim
Pintuck Foot #30/31/32/33
008 472 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E30

View proof JSONReport this claim
Reverse Pattern Foot #1/1C/1D
033 202 72 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E31

View proof JSONReport this claim
Blindstitch Foot #5
008 449 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E32

View proof JSONReport this claim
Pintuck Foot #30/31/32/33
008 471 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E33

View proof JSONReport this claim
Free Motion Embroidery Foot #24
008 467 74 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E35

View proof JSONReport this claim
Zigzag Hemmer #61/63/66
008 485 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E36

View proof JSONReport this claim
Pintuck and Decorative Stitch Foot with Clear Sole #46C
033 308 71 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E37

View proof JSONReport this claim
Gathering Foot #16
008 460 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E38

View proof JSONReport this claim
Straight Stitch Foot with Non-Stick Sole #53
008 478 74 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E39

View proof JSONReport this claim
Quilting Foot #29/29C
008 469 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E40

View proof JSONReport this claim
Cording Foot #22/25
008 468 74 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E41

View proof JSONReport this claim
Embroidery Foot #6
008 451 74 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E43

View proof JSONReport this claim
Walking Foot
008 969 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E44

View proof JSONReport this claim
Zigzag Foot #0
008 444 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E45

View proof JSONReport this claim
Binder Foot #95/95C
033 554 71 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E46

View proof JSONReport this claim
Reverse Pattern Foot #1/1C/1D
008 445 74 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E47

View proof JSONReport this claim
Zigzag Hemmer #61/63/66
008 483 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E48

View proof JSONReport this claim
Invisible Zipper Foot #35
030 653 72 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E51

View proof JSONReport this claim
Braiding Foot #21
008 463 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E53

View proof JSONReport this claim
Zipper Foot #4/4D
008 448 74 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E54

View proof JSONReport this claim
Adjustable Ruler Foot #72/72S
101 786 70 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E55

View proof JSONReport this claim
Gathering Foot #16
008 879 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E56

View proof JSONReport this claim
Reverse Pattern Foot with Clear Sole #34/34C/34D
030 770 72 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E57

View proof JSONReport this claim
Button Sew-On Foot #18
008 461 74 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E58

View proof JSONReport this claim
Snap On Shank #78
032 725 71 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E59

View proof JSONReport this claim
Bulky Overlock Foot #12/12C
008 878 75 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E60

View proof JSONReport this claim
Adapter Shank #75/77
032 710 71 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E61

View proof JSONReport this claim
Darning Foot #9
008 454 74 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E63

View proof JSONReport this claim
Leather Roller Foot #55
031 304 71 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E65

View proof JSONReport this claim
Adjustable Gliding Cup Foot #74
104 213 70 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E66

View proof JSONReport this claim
Open Embroidery Foot #20/20C/20D
008 462 74 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E67

View proof JSONReport this claim
Zipper Foot with Non-Stick Sole #54
008 479 75 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E68

View proof JSONReport this claim
Zigzag Foot with Non-Stick Sole #52/52C/52D
008 881 75 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E69

View proof JSONReport this claim
Zigzag Hemmer #61/63/66
008 481 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E70

View proof JSONReport this claim
Patchwork Foot with Guide #57/57D
031 577 72 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E71

View proof JSONReport this claim
Quilting Foot #29/29C
008 880 74 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E72

View proof JSONReport this claim
Adjustable Stippling Foot #73
104 211 70 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E74

View proof JSONReport this claim
Open Embroidery Foot with Non-Stick Sole #56
008 480 74 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E75

View proof JSONReport this claim
Free-motion Couching Foot #43
031 779 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E76

View proof JSONReport this claim
Embroidery Foot with Clear Sole #39/39C
031 406 72 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E77

View proof JSONReport this claim
Ruffler #86
008 386 75 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E78

View proof JSONReport this claim
Zigzag Foot with Non-Stick Sole #52/52C/52D
008 477 74 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E79

View proof JSONReport this claim
Patchwork Foot #97/97D
035 927 70 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E80

View proof JSONReport this claim
Reverse Pattern Foot with Clear Sole #34/34C/34D
030 769 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E81

View proof JSONReport this claim
Echo Quilting and CutWork Foot #44C
033 369 72 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E82

View proof JSONReport this claim
Buttonhole Foot with Slide #3A/3B/3C
031 250 71 01
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E83

View proof JSONReport this claim
Tailor Tack Foot #7
008 452 74 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E84

View proof JSONReport this claim
Patchwork Foot #37/37D
008 474 74 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E85

View proof JSONReport this claim
Open Embroidery Foot #20/20C/20D
033 203 72 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E86

View proof JSONReport this claim
Double Cord Foot #59C/60C
032 370 72 01
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E87

View proof JSONReport this claim
Buttonhole Foot #3/3C
033 204 72 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E88

View proof JSONReport this claim
Cording Foot #22/25
008 465 74 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E89

View proof JSONReport this claim
Binder Foot #95/95C
033 555 71 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E90

View proof JSONReport this claim
Piping Foot #38
031 021 72 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E91

View proof JSONReport this claim
Roller Foot #51
008 476 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E92

View proof JSONReport this claim
Appliqué Foot #23
008 466 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E93

View proof JSONReport this claim
Straight Stitch Hemmer #62/64
008 484 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E95

View proof JSONReport this claim
Lap Seam Foot #71
008 489 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E96

View proof JSONReport this claim
Buttonhole Foot #3/3C
008 447 74 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E97

View proof JSONReport this claim
Roll and Shell Hemmer #68/69
008 487 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E98

View proof JSONReport this claim
Embroidery Foot #15
032 708 71 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E99

View proof JSONReport this claim
Embroidery Foot with Clear Sole #39/39C
032 171 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E100

View proof JSONReport this claim

attachment · 15

Binder Attachment for Unfolded Bias Tape #88
033 505 72 03
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E10

View proof JSONReport this claim
Binder Attachment for Pre-folded Bias Tape #87
033 505 72 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E13

View proof JSONReport this claim
Patchwork Seam Guide
032 706 71 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E15

View proof JSONReport this claim
Knee Lifter
001 635 77 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E20

View proof JSONReport this claim
Knee Lifter
001 635 77 01
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E22

View proof JSONReport this claim
Binder Attachment for Pre-folded Bias Tape #87
033 505 72 02
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E26

View proof JSONReport this claim
Right and Left Seam Guide
033 338 71 01
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E34

View proof JSONReport this claim
Pintuck Attachment
033 270 71 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E42

View proof JSONReport this claim
Circular Embroidery Attachment #83
008 373 74 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E49

View proof JSONReport this claim
Seam Guide with Scale
003 027 71 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E50

View proof JSONReport this claim
Binder Attachment for Unfolded Bias Tape #88
033 505 72 05
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E52

View proof JSONReport this claim
Binder Attachment for Unfolded Bias Tape #88
033 505 72 04
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E62

View proof JSONReport this claim
Right and Left Seam Guide
033 338 71 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E64

View proof JSONReport this claim
Binder Attachment for Pre-folded Bias Tape #87
033 505 72 01
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E73

View proof JSONReport this claim
Spanish Hemstitch Attachment #47
033 809 73 00
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in BERNINA Accessory Category · BERNINA Category C, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E94

View proof JSONReport this claim

OEM compatibility programs

Documented group memberships

Group codes are namespaced to the issuing OEM program and apply only to the cited domains. They are not machine series and do not prove compatibility outside those domains.

BERNINA Category C

BERNINA Accessory Category · code C

Applies to: accessory, presser foot

View machine-to-group evidence · 1 unique proof passage: Proof E7

View proof JSONReport this claim

BERNINA Category C3

BERNINA Accessory Category · code C3

Applies to: accessory, presser foot

View machine-to-group evidence · 1 unique proof passage: Proof E8

View proof JSONReport this claim

Official source library

Documents used on this page

Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.

BERNINA aurora 430 / 440 QE / 450 user manual (EN)

instruction manual

Open official source destination · 1 unique proof passage: Proof E3

BERNINA Accessories Catalog

accessory catalog

Open official source destination · 1 unique proof passage: Proof E1

Evidence library

100 exact proof passages from 2 OEM documents

Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.

Open exact proof passages · 100 unique proof passages
Official OEM PDF

What this passage proves

  • Identity — printed machine name: 450
Category C 1 180 3 435 185 450
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
2
Open source
Open cited PDF at page 2Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
60df9965ca121e24368a116d44cec01d05f0bb22e5841316ad04978a07ca8754
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — preferred display name: 450
  • Identity — model code: 450
Category C 1 180 3 435 185 450
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
2
Open source
Open cited PDF at page 2Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
25568e50e14df0ead7d6cc9600bf6be37811413cbcdafceedb4dafc4da49e05c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — product line: aurora
BERNINA has added another great sewing and embroidery computer to the very successful aurora product line.
Document
BERNINA aurora 430 / 440 QE / 450 user manual (EN)
Issuer
BERNINA
Extraction
native
PDF page
1
Open source
Open cited PDF at page 1
Advanced technical receipt
Asset SHA-256
f338ae3c493ecd8d51102dba9911cc6bb7852d3af5911cdf94b4c2d373d097b4
Locator
82204d0d7c84b4b853a50522191e983bad187ea13f7ae82333eef856c174912b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: aurora 450
BERNINA has added another great sewing and embroidery computer to the very successful aurora product line. The new aurora 450 has a new hook system which enables you dear
Document
BERNINA aurora 430 / 440 QE / 450 user manual (EN)
Issuer
BERNINA
Extraction
native
PDF page
1
Open source
Open cited PDF at page 1
Advanced technical receipt
Asset SHA-256
f338ae3c493ecd8d51102dba9911cc6bb7852d3af5911cdf94b4c2d373d097b4
Locator
5ad6e61c8982fd1b15bb0128b255ae28dabe0ba096d983b317ae9cd6bf28ada5
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — preferred display name: aurora 450
aurora 450 has a new hook system which enables you dear
Document
BERNINA aurora 430 / 440 QE / 450 user manual (EN)
Issuer
BERNINA
Extraction
native
PDF page
1
Open source
Open cited PDF at page 1
Advanced technical receipt
Asset SHA-256
f338ae3c493ecd8d51102dba9911cc6bb7852d3af5911cdf94b4c2d373d097b4
Locator
0e08fdac63710d838439bb1083cb0472d3768d207a8ff57baac375e373d20860
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • needle fact — needle system: 130/705H
  • Needle answer — 130/705H
BERNINA requires needle system 130/705 H.
Document
BERNINA aurora 430 / 440 QE / 450 user manual (EN)
Issuer
BERNINA
Extraction
native
PDF page
18
Open source
Open cited PDF at page 18
Advanced technical receipt
Asset SHA-256
f338ae3c493ecd8d51102dba9911cc6bb7852d3af5911cdf94b4c2d373d097b4
Locator
274546948d83639e55a371f035453ed702858c9f459aebcb0a71ded8beea2f56
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • OEM program membership — BERNINA Accessory Category: BERNINA Category C
  • Item fitment path — this machine's OEM group membership for Edgestitch Foot #10/10C/10D
  • Item fitment path — this machine's OEM group membership for Binder Attachment for Unfolded Bias Tape #88
  • Item fitment path — this machine's OEM group membership for Jeans Foot #8/8D
  • Item fitment path — this machine's OEM group membership for Adapter Shank #75/77
  • Item fitment path — this machine's OEM group membership for Binder Attachment for Pre-folded Bias Tape #87
  • Item fitment path — this machine's OEM group membership for Roll and Shell Hemmer #68/69
  • Item fitment path — this machine's OEM group membership for Patchwork Seam Guide
  • Item fitment path — this machine's OEM group membership for Pintuck Foot #30/31/32/33
  • Item fitment path — this machine's OEM group membership for Straight Stitch Hemmer #62/64
  • Item fitment path — this machine's OEM group membership for Bulky Overlock Foot #12/12C
  • Item fitment path — this machine's OEM group membership for Knee Lifter
  • Item fitment path — this machine's OEM group membership for Embroidery Foot #26/26L
  • Item fitment path — this machine's OEM group membership for Overlock Foot #2/2A
  • Item fitment path — this machine's OEM group membership for Double Cord Foot #59C/60C
  • Item fitment path — this machine's OEM group membership for Cordonnet Foot #11
  • Item fitment path — this machine's OEM group membership for Adjustable Ruler Foot #72/72S
  • Item fitment path — this machine's OEM group membership for Reverse Pattern Foot #1/1C/1D
  • Item fitment path — this machine's OEM group membership for Blindstitch Foot #5
  • Item fitment path — this machine's OEM group membership for Right and Left Seam Guide
  • Item fitment path — this machine's OEM group membership for Free Motion Embroidery Foot #24
  • Item fitment path — this machine's OEM group membership for Zigzag Hemmer #61/63/66
  • Item fitment path — this machine's OEM group membership for Pintuck and Decorative Stitch Foot with Clear Sole #46C
  • Item fitment path — this machine's OEM group membership for Gathering Foot #16
  • Item fitment path — this machine's OEM group membership for Straight Stitch Foot with Non-Stick Sole #53
  • Item fitment path — this machine's OEM group membership for Quilting Foot #29/29C
  • Item fitment path — this machine's OEM group membership for Cording Foot #22/25
  • Item fitment path — this machine's OEM group membership for Pintuck Attachment
  • Item fitment path — this machine's OEM group membership for Embroidery Foot #6
  • Item fitment path — this machine's OEM group membership for Walking Foot
  • Item fitment path — this machine's OEM group membership for Zigzag Foot #0
  • Item fitment path — this machine's OEM group membership for Binder Foot #95/95C
  • Item fitment path — this machine's OEM group membership for Circular Embroidery Attachment #83
  • Item fitment path — this machine's OEM group membership for Seam Guide with Scale
  • Item fitment path — this machine's OEM group membership for Invisible Zipper Foot #35
  • Item fitment path — this machine's OEM group membership for Braiding Foot #21
  • Item fitment path — this machine's OEM group membership for Zipper Foot #4/4D
  • Item fitment path — this machine's OEM group membership for Reverse Pattern Foot with Clear Sole #34/34C/34D
  • Item fitment path — this machine's OEM group membership for Button Sew-On Foot #18
  • Item fitment path — this machine's OEM group membership for Snap On Shank #78
  • Item fitment path — this machine's OEM group membership for Darning Foot #9
  • Item fitment path — this machine's OEM group membership for Leather Roller Foot #55
  • Item fitment path — this machine's OEM group membership for Adjustable Gliding Cup Foot #74
  • Item fitment path — this machine's OEM group membership for Open Embroidery Foot #20/20C/20D
  • Item fitment path — this machine's OEM group membership for Zipper Foot with Non-Stick Sole #54
  • Item fitment path — this machine's OEM group membership for Zigzag Foot with Non-Stick Sole #52/52C/52D
  • Item fitment path — this machine's OEM group membership for Patchwork Foot with Guide #57/57D
  • Item fitment path — this machine's OEM group membership for Adjustable Stippling Foot #73
  • Item fitment path — this machine's OEM group membership for Open Embroidery Foot with Non-Stick Sole #56
  • Item fitment path — this machine's OEM group membership for Free-motion Couching Foot #43
  • Item fitment path — this machine's OEM group membership for Embroidery Foot with Clear Sole #39/39C
  • Item fitment path — this machine's OEM group membership for Ruffler #86
  • Item fitment path — this machine's OEM group membership for Patchwork Foot #97/97D
  • Item fitment path — this machine's OEM group membership for Echo Quilting and CutWork Foot #44C
  • Item fitment path — this machine's OEM group membership for Buttonhole Foot with Slide #3A/3B/3C
  • Item fitment path — this machine's OEM group membership for Tailor Tack Foot #7
  • Item fitment path — this machine's OEM group membership for Patchwork Foot #37/37D
  • Item fitment path — this machine's OEM group membership for Buttonhole Foot #3/3C
  • Item fitment path — this machine's OEM group membership for Piping Foot #38
  • Item fitment path — this machine's OEM group membership for Roller Foot #51
  • Item fitment path — this machine's OEM group membership for Appliqué Foot #23
  • Item fitment path — this machine's OEM group membership for Spanish Hemstitch Attachment #47
  • Item fitment path — this machine's OEM group membership for Lap Seam Foot #71
  • Item fitment path — this machine's OEM group membership for Embroidery Foot #15
Category C 1 180 3 435 185 450
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
2
Open source
Open cited PDF at page 2Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
18db53010cd7871d4ef21dff9dd7a1e7340114b6c83c0cdd7e9a07dd60ef5430
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • OEM program membership — BERNINA Accessory Category: BERNINA Category C3
Category C 1 180 3 435 185 450
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
2
Open source
Open cited PDF at page 2Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
a8518019741cf9690a12f9efe2f10bd0c8de032b321bd54ad5e349a2390c9b20
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Edgestitch Foot #10/10C/10D (compatible)
008 455 74 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
19
Open source
Open cited PDF at page 19Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
8997f09bcb984872ad610713ad359fd69dd6db1a2cf076be80b82b2a8bf25363
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: Binder Attachment for Unfolded Bias Tape #88 (compatible)
033 505 72 03 A B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
21
Open source
Open cited PDF at page 21Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
5bd8835095c42c5a1b73eede30c7740b61c5fe5acff6e323a1e7c2329c080c2d
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Jeans Foot #8/8D (compatible)
008 453 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
19
Open source
Open cited PDF at page 19Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
6ed0fa2c01b727385f53894359cc86df4268c286828bf136429cf5bdfe739601
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Adapter Shank #75/77 (compatible)
032 702 71 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
38
Open source
Open cited PDF at page 38Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
b801eff462e24869fe6e61831f626e7ea4a9d7151d8d5ceb6799055961ee7e12
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: Binder Attachment for Pre-folded Bias Tape #87 (compatible)
033 505 72 00 A B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
21
Open source
Open cited PDF at page 21Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
4cedc246da03e310c271de90d3a3f7145bfe2529115d04857def7bca7dfc744f
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Roll and Shell Hemmer #68/69 (compatible)
008 486 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
811ddb6fdf82c0a1e7da7136686269e8e09dbc924bb11d3e2ddd1816b099c3f3
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: Patchwork Seam Guide (compatible)
032 706 71 00 A B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
38
Open source
Open cited PDF at page 38Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
d09d86041430a27272acae01fba65cba78c074dfa7e09486d8aef446616b7f43
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Pintuck Foot #30/31/32/33 (compatible)
008 470 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
26
Open source
Open cited PDF at page 26Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
cc18af4868dbf09fe936f82d82b068c1a3d65e9b22ee5235fe10643cb17075e9
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Straight Stitch Hemmer #62/64 (compatible)
008 482 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
50b51e49a198e03199e193e0c5eb618cecc357e15d1f6fb5d93f263062b59268
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Pintuck Foot #30/31/32/33 (compatible)
008 473 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
26
Open source
Open cited PDF at page 26Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
a639890e25fcba546d8029b36b30abfdb1f3021e3a06c9a7db856d7463962303
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Bulky Overlock Foot #12/12C (compatible)
008 457 74 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
3c4df467661ab8c49aaed6878bcfd1b3e4a395ec1cd8ac6721ea61f608bc1e79
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: Knee Lifter (compatible)
001 635 77 00 A B C
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
47
Open source
Open cited PDF at page 47Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
96710976ab56ae1f93d44a3797495721087f859c7e3d2e1241a0135c9e4bf070
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Edgestitch Foot #10/10C/10D (compatible)
008 877 75 00 C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
19
Open source
Open cited PDF at page 19Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
f8cb158965beb61525c507f27fd6f1c4e2c696d27ceb0d280d564111fc86308c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: Knee Lifter (compatible)
001 635 77 01 A B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
47
Open source
Open cited PDF at page 47Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
fa742e43e73ea42fe3b0666b3596a837e5161dd7d89db7e45ca9b98e4038c3cf
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Embroidery Foot #26/26L (compatible)
107 779 70 00 B C D E F G
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
29
Open source
Open cited PDF at page 29Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
537eb66dd73808e066d2da399324676e1133e88c9d90b62412880be16131d20b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Overlock Foot #2/2A (compatible)
008 446 74 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
784078229cf6998de361ec9e26e61859bf507ac3f706db760ddfd108623d2ae3
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Double Cord Foot #59C/60C (compatible)
032 370 72 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
29
Open source
Open cited PDF at page 29Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
eea8ec3c05af660aaf9a81f00ac0cc800ddf4b754bd8ecb52cd4bbe09ea58ab1
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: Binder Attachment for Pre-folded Bias Tape #87 (compatible)
033 505 72 02 A B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
21
Open source
Open cited PDF at page 21Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
a08f5872e567aed9fed9d64be4bd3a341e14d9eadf6e44ec2b8e7861114d791b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Overlock Foot #2/2A (compatible)
033 330 72 01 C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
30552bfb924a4c0998255f9d2c72dd158e4ceb5be11d7d3fef6e35766f440ee4
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Cordonnet Foot #11 (compatible)
008 456 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
25
Open source
Open cited PDF at page 25Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
5b684ee009f2635a3e8d4f5763bc1e1f8880fe271271c95f60f05d6a0f311020
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Adjustable Ruler Foot #72/72S (compatible)
105 803 70 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
33
Open source
Open cited PDF at page 33Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
9a69b8cf91ffe4da6d819b45eebf1da2c0c1110773244782425acd50c5e6be8e
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Pintuck Foot #30/31/32/33 (compatible)
008 472 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
26
Open source
Open cited PDF at page 26Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
c9d2dbe2ac6f12d1a53710766ff0cbd7f2b59354af978add70fe2b19de192af7
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Reverse Pattern Foot #1/1C/1D (compatible)
033 202 72 00 C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
13
Open source
Open cited PDF at page 13Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
73e8dd65be2c6e648d150e1b3e1ad79a6f59e703e963d1de93864bbcf1f018a5
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Blindstitch Foot #5 (compatible)
008 449 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
19
Open source
Open cited PDF at page 19Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
2cdc613499a18ff7ac080d4c08d7bb388c8d7464cfd4d61a5b3bc6219840afbe
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Pintuck Foot #30/31/32/33 (compatible)
008 471 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
26
Open source
Open cited PDF at page 26Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
54ffac1461647a7f7d4719cc7d26de1104c67ad0c3c105f2858c972d944e0b37
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: Right and Left Seam Guide (compatible)
033 338 71 01 A B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
43
Open source
Open cited PDF at page 43Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
5d683267d156e75749daebc53118039c447fd3ca42ddf663ce1e4246eedded9d
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Free Motion Embroidery Foot #24 (compatible)
008 467 74 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
32
Open source
Open cited PDF at page 32Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
85a28bb36c3839beb52a1c9eb3abaaed21c406eac4402dd8826fd7a04783a031
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Zigzag Hemmer #61/63/66 (compatible)
008 485 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
3b6c20a6013e24327cf61ae0e27f589be4bff74b11e2020c115d033f6e4243f1
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Pintuck and Decorative Stitch Foot with Clear Sole #46C (compatible)
033 308 71 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
26
Open source
Open cited PDF at page 26Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
655dcc1f196c7bff29c3acbe29d2cd42ae62d0c07891900dab482e447cdfa067
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Gathering Foot #16 (compatible)
008 460 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
24
Open source
Open cited PDF at page 24Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
d786b69622ee1f0bfadf90638c5f8ed3364a9011afd4b40703dc1c2ec0017713
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Straight Stitch Foot with Non-Stick Sole #53 (compatible)
008 478 74 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
14
Open source
Open cited PDF at page 14Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
8afeb363dededc5a26719299d57daaab583ae9c1434a5f9c3f06bbcb80789cdd
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Quilting Foot #29/29C (compatible)
008 469 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
32
Open source
Open cited PDF at page 32Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
fc409f2be843de6b6ef8abaa000377982342fdf136f04a5bb3df1dfead01f475
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Cording Foot #22/25 (compatible)
008 468 74 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
25
Open source
Open cited PDF at page 25Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
91de38a429c61be7e0ca4c675d648c5189a6b29707661936f25327a67dbe7733
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: Pintuck Attachment (compatible)
033 270 71 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
26
Open source
Open cited PDF at page 26Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
cc7fe8fb899fe40b71158a9aa42fed6166610e1625f1b08935c4253009897ec1
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Embroidery Foot #6 (compatible)
008 451 74 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
23
Open source
Open cited PDF at page 23Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
cbc9cc9458f75e616b005f2d86574a40562474dc11d059c175e1331ef1ee51c9
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Walking Foot (compatible)
008 969 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
13
Open source
Open cited PDF at page 13Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
76f2164eb1a5b728f285ef10fc79ea63beaa878bce2a17e0208c3079c9291cef
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Zigzag Foot #0 (compatible)
008 444 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
460fe83c09edc7285400c92e4c89875db996f90cb12ee5c058083d8f743d6c08
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Binder Foot #95/95C (compatible)
033 554 71 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
21
Open source
Open cited PDF at page 21Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
84b8584577e0e23b6a01c960b2f6eed82983fa5b9663fa0a8454f6cc5962adca
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Reverse Pattern Foot #1/1C/1D (compatible)
008 445 74 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
13
Open source
Open cited PDF at page 13Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
4b90bb1b4215ac8b7cdff9d230f895855bce996b024836e4fe1c4ddcb67b944d
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Zigzag Hemmer #61/63/66 (compatible)
008 483 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
17fd26ce69709acf87ff939714ca4cf31e63026e8a39ac7fe9747dabc4f7c956
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: Circular Embroidery Attachment #83 (compatible)
008 373 74 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
42
Open source
Open cited PDF at page 42Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
6a3d1a761f8fa2e949ace540680d926217db24dc1c0ab33f9fd50e2517be2494
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: Seam Guide with Scale (compatible)
003 027 71 00 A B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
43
Open source
Open cited PDF at page 43Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
aa17e703c2ab41c268989416912e49455e218b8e591f49ec1252a5b1a9567b95
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Invisible Zipper Foot #35 (compatible)
030 653 72 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
18
Open source
Open cited PDF at page 18Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
b7e97229b48017b536daba89d6bc0537a46daad06792439ceb2433a7c7e4c15f
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: Binder Attachment for Unfolded Bias Tape #88 (compatible)
033 505 72 05 A B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
21
Open source
Open cited PDF at page 21Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
af01a2e439229be85ff04e2cf1c5a17c6ed9a46d83958a45560117946a3f9e10
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Braiding Foot #21 (compatible)
008 463 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
25
Open source
Open cited PDF at page 25Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
2d88b5a30cbf1dfec5978edd94ed3a04463a20d52d8e4f030ca40350936e6077
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Zipper Foot #4/4D (compatible)
008 448 74 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
17
Open source
Open cited PDF at page 17Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
8698bc23dc14ffbac2efc91a81a7870f92a937d452d63777bdca8a0e1d91f7a7
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Adjustable Ruler Foot #72/72S (compatible)
101 786 70 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
33
Open source
Open cited PDF at page 33Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
61e19df6d13f40dbbf257a08b1461f6ed84aaa3a003dbf1efd707967a8f0dd93
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Gathering Foot #16 (compatible)
008 879 73 00 C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
24
Open source
Open cited PDF at page 24Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
9f2f2d4c18f705657005ada659262051a127a067231d088c5989663c16c2b381
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Reverse Pattern Foot with Clear Sole #34/34C/34D (compatible)
030 770 72 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
13
Open source
Open cited PDF at page 13Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
1b3bb577fc5420ce6286feece2275a0a8bb93e4e4d31c0b44598b9a35328e820
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Button Sew-On Foot #18 (compatible)
008 461 74 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
15
Open source
Open cited PDF at page 15Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
8d19759d48ee6d12edce7738cb5320014c6d3059fcfc5304286b1ab9f0f2ea06
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Snap On Shank #78 (compatible)
032 725 71 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
38
Open source
Open cited PDF at page 38Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
b5b344aa701b0735101a9320e6b69dd393b513970ef7b0a55e14e9abda431de7
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Bulky Overlock Foot #12/12C (compatible)
008 878 75 00 C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
dc91caae859e67dc40c550da35d19e48aeadb33684e84f383a0d6faea066a80b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Adapter Shank #75/77 (compatible)
032 710 71 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
38
Open source
Open cited PDF at page 38Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
49329d790ffafe2f6d56879867c8836ea05431eb7c11fe4bd16578bec082bf7b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: Binder Attachment for Unfolded Bias Tape #88 (compatible)
033 505 72 04 A B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
21
Open source
Open cited PDF at page 21Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
9e4e87db6270443b9547bad54f391d5d1f716b6c0f073257f16285f122878ad8
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Darning Foot #9 (compatible)
008 454 74 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
32
Open source
Open cited PDF at page 32Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
4092be83317927b1b98cd29fb5c87c1b3aca909f95c612930f5995d17dfb10bb
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: Right and Left Seam Guide (compatible)
033 338 71 00 A B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
43
Open source
Open cited PDF at page 43Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
f6034f6ca328fb8f72359944ca67f41b383f86642afe382d1cb1d6433fb71606
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Leather Roller Foot #55 (compatible)
031 304 71 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
28
Open source
Open cited PDF at page 28Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
c06409c0e0ad0a47f96d77f6e8a694ca6690e0bcddb2d66ce5308ed60f541747
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Adjustable Gliding Cup Foot #74 (compatible)
104 213 70 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
34
Open source
Open cited PDF at page 34Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
56f119cd1e1690eaa52d7205892c1088704948c5f0426fee1e963014b2dfbc37
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Open Embroidery Foot #20/20C/20D (compatible)
008 462 74 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
23
Open source
Open cited PDF at page 23Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
641707c0e852efab643c96c65d69004c3bcfd990e88bbe66e6fa52ec488384c1
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Zipper Foot with Non-Stick Sole #54 (compatible)
008 479 75 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
17
Open source
Open cited PDF at page 17Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
990e7fdeaa40ce727886918171f323b2eb1eecae66ee44227e77dc3c6f9546d5
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Zigzag Foot with Non-Stick Sole #52/52C/52D (compatible)
008 881 75 00 C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
b64397d65739c01956fe2392e534e992c1e8eff174b62ebd677b3f6561090e41
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Zigzag Hemmer #61/63/66 (compatible)
008 481 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
d447447291e3da7a14d0a5645f096e084a074162d3ec14be4141a19f3e35b2dd
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Patchwork Foot with Guide #57/57D (compatible)
031 577 72 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
31
Open source
Open cited PDF at page 31Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
9dbd12e250d7e4fcd40341b419684b63516064516d57ad66461603907ae00367
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Quilting Foot #29/29C (compatible)
008 880 74 00 C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
32
Open source
Open cited PDF at page 32Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
b8aa3700749ca989a0bd7045d344f32e905d5b54010a9cd1ce77cc3a048cb956
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: Binder Attachment for Pre-folded Bias Tape #87 (compatible)
033 505 72 01 A B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
21
Open source
Open cited PDF at page 21Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
751d78754813deeb00b16e77142cd4fca2dd391b6dffa1852dc87d19a17a34f8
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Adjustable Stippling Foot #73 (compatible)
104 211 70 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
34
Open source
Open cited PDF at page 34Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
75b9805c96f0950da971dcb6da67b826c9bb84b923c42737a2ce8e9b92b587bc
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Open Embroidery Foot with Non-Stick Sole #56 (compatible)
008 480 74 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
23
Open source
Open cited PDF at page 23Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
b67e07be281eb1c7462c4ce410f132f5a95ab4242c31620b6c0a94b6733b3c4a
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Free-motion Couching Foot #43 (compatible)
031 779 73 00 B C D E F G
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
28
Open source
Open cited PDF at page 28Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
8f2c47d6dd98a4b6c2ff60d5bbee12db8c57f3f05acf0a5a787236803bcdccc8
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Embroidery Foot with Clear Sole #39/39C (compatible)
031 406 72 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
27
Open source
Open cited PDF at page 27Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
b8fe7b326d4202c81d9d9efa2ddc2ac0d8c09a3c66dbfc673b7dd9e5401fd0cb
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Ruffler #86 (compatible)
008 386 75 00 B C
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
24
Open source
Open cited PDF at page 24Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
7e0dcd28590906b3f5c4c6eda32435d1402387c0401dd24c52d5ccb73e630c34
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Zigzag Foot with Non-Stick Sole #52/52C/52D (compatible)
008 477 74 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
872a88406f33dac530f6f7a06125e7c05c963b02cae696693fa7c20aa9c500de
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Patchwork Foot #97/97D (compatible)
035 927 70 00 C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
31
Open source
Open cited PDF at page 31Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
703717e145fe752f15c9632ccab7000553a998f30cdc8e0ab03f8b77b062e0d8
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Reverse Pattern Foot with Clear Sole #34/34C/34D (compatible)
030 769 73 00 C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
13
Open source
Open cited PDF at page 13Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
980fcfef35fc11d278d6214bbe52a79cb208049926b6308ef38ab901cc19fdbc
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Echo Quilting and CutWork Foot #44C (compatible)
033 369 72 00 B C D E F G
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
33
Open source
Open cited PDF at page 33Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
a960f7f7d14adfb851406b6a206b6a6424fb731481f4904fe9dbe636b1e324c0
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Buttonhole Foot with Slide #3A/3B/3C (compatible)
031 250 71 01 Bn C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
15
Open source
Open cited PDF at page 15Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
cb2fc9c0f42183eba1bdebad39395d5b38b0c3b9d2021f45853050a263a7501a
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Tailor Tack Foot #7 (compatible)
008 452 74 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
24
Open source
Open cited PDF at page 24Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
3b18a6868d75f5c9e3d5b94ea3d3a28830255483377cf4f19cf39a31402c890d
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Patchwork Foot #37/37D (compatible)
008 474 74 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
31
Open source
Open cited PDF at page 31Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
9c9c97ecc0c0071bc9cc9af728285c00bb64f6db9d9968a233df4b6b8aa9c240
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Open Embroidery Foot #20/20C/20D (compatible)
033 203 72 00 C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
23
Open source
Open cited PDF at page 23Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
7516c60801326edfe978eeee574bea02a5d33dc193505a4a9f80f885cb6c2762
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Double Cord Foot #59C/60C (compatible)
032 370 72 01 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
29
Open source
Open cited PDF at page 29Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
b852035bbc085cb32a0a9e9ee9d93b415d47c1b4d47bf6a6b342f0560c14ee23
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Buttonhole Foot #3/3C (compatible)
033 204 72 00 C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
15
Open source
Open cited PDF at page 15Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
f763a215cecc9c9671551f6c9b05dfb4e40e8ecbce7b7a8dd562e69a6720967a
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Cording Foot #22/25 (compatible)
008 465 74 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
25
Open source
Open cited PDF at page 25Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
e4fbb8d254f46b020847b17dd8bba44d97bf120a0915e69a4180140c74cb1dcf
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Binder Foot #95/95C (compatible)
033 555 71 00 C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
21
Open source
Open cited PDF at page 21Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
01bcaae52b79b69c38ddf00ca4c0e0f0699a99a069f0670ae3f6e92794bda4f0
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Piping Foot #38 (compatible)
031 021 72 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
27
Open source
Open cited PDF at page 27Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
febbab7c4330a78cdd3531cc51bc5cba741111a150b7612cf907f8e1717f542d
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Roller Foot #51 (compatible)
008 476 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
14
Open source
Open cited PDF at page 14Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
b2d6a609bf7dc305226b7591b54f3c58756d6c953748fc06e4515a2e2b85ffbc
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Appliqué Foot #23 (compatible)
008 466 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
30
Open source
Open cited PDF at page 30Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
57da2d6449259d06e51d7107075d6b226499a5c5d04d06515b5d95f3ee34c3cb
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: Spanish Hemstitch Attachment #47 (compatible)
033 809 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
27
Open source
Open cited PDF at page 27Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
5b0082ffb1d053851c305c985c79e45f33410e77dedc33d14564f462272d8ea8
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Straight Stitch Hemmer #62/64 (compatible)
008 484 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
782b20c930b15c2361d408538ac3a851baace9272c6539abe715c75d006090d4
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Lap Seam Foot #71 (compatible)
008 489 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
22
Open source
Open cited PDF at page 22Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
0e69ab612f27b2421e0cb4836c5ceb82421a99b7787f1a9e68c09262d7ef45cb
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Buttonhole Foot #3/3C (compatible)
008 447 74 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
15
Open source
Open cited PDF at page 15Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
f6e9d0b3174ae487b92ede0dd994e01fe6e689bf81c78a75d3c8f48517337b76
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Roll and Shell Hemmer #68/69 (compatible)
008 487 73 00 B C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
bde0c9fffdda02c9c44ac578240bd93790d8af06dde0f4015003dc07f04b5f04
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Embroidery Foot #15 (compatible)
032 708 71 00 B C D E F G
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
29
Open source
Open cited PDF at page 29Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
c25ceb239c844a3c854f8e4eb95bc9f7547b3387355ca05de392a7e2a540a92b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: Embroidery Foot with Clear Sole #39/39C (compatible)
032 171 73 00 C D
Document
BERNINA Accessories Catalog
Issuer
BERNINA
Extraction
native
PDF page
27
Open source
Open cited PDF at page 27Open OEM source or support page
Advanced technical receipt
Asset SHA-256
bbc0bc4808389cc6cc09ace80cb7f30e5596d13cfe0854e085769992116ca26c
Locator
2629ad79abe4d626faeaf0b8b391d1c80446bce5b9de78aafbd606db7c5f0dd8
Destination status
direct_pdf

What is supported, and what remains open?

3 supported answers and 3 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.

Unresolved owner questions (0)

    Report a correction or share an OEM source

    Advanced provenance and dataset receipt

    Public snapshot a1cc1aceef228fcf33329e37165ab888ce5b9fe3f13eb56967ae0fbf41d8d8a7

    Catalog e156281c7d3048027b5ac89e7476be8f54dd5a9309505e96260b0455d3cd2a7e · exact native quotes only · dossier method sewgraph-model-dossier-v2