SewGraph

husqvarna viking · verified physical machine

EMERALD 118

View cited identity evidence · 4 unique proof passages

Jump to: Proof E1, Proof E2, Proof E3, Proof E4

verified exact machine · 2/3 core systems

Identity verified · evidence for each answer

Using and maintaining this machine

Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.

Presser feet and adapters

Do ordinary presser feet snap on?

conditional

Native snap-on feet. Ordinary presser feet snap onto the machine’s presser-foot ankle.

  • Align the foot cross-pin between the ankle spring and press back until it snaps into place. This establishes foot-to-ankle attachment only.

Source evidence · 1 unique proof passage: Profile Proof E1

How much extra presser-foot lift is available?

conditional

The presser-foot lift has an extra 0.6 cm (1/4 inch) raised position for heavy fabric or foot removal.

  • This is lift clearance, not a shank classification or universal-foot claim.

Source evidence · 1 unique proof passage: Profile Proof E1

Bobbins and hook

How is the bobbin inserted?

conditional

Place the bobbin in its case, guide thread through the front notch and tension spring, then into the side notch.

  • Follow the diagram for unwind orientation; the extracted wording alone does not normalize clockwise or counterclockwise direction.

Source evidence · 1 unique proof passage: Profile Proof E2

How is the bobbin case reinstalled?

conditional

Insert the bobbin case with its knob next to the stopper in the hook-assembly area.

  • This is the OEM replacement position, not a standardized hook-type classification.

Source evidence · 1 unique proof passage: Profile Proof E3

Needles and threading

Which needle system does it use?

conditional

Use standard household sewing-machine needles.

  • The manual does not print a formal system code such as 130/705 H or 15x1, so exact cross-system equivalence remains unknown.

Source evidence · 1 unique proof passage: Profile Proof E4

Which way does the needle face?

conditional

Push the needle fully upward with its flat side facing away from you.

  • Turn off the machine, lower the presser foot and tighten the clamp screw firmly.

Source evidence · 1 unique proof passage: Profile Proof E4

When should the needle be replaced?

conditional

Do not use blunt or damaged needles; check frequently for barbed or blunt points.

  • The warning applies to needle condition and does not establish sizes or special-use needle requirements.

Source evidence · 1 unique proof passage: Profile Proof E4

Features and specifications

Does it have a free arm?

supported

Free arm available after removing the extension table.

Source evidence · 1 unique proof passage: Profile Proof E5

How is sewing speed controlled?

conditional

Sewing speed responds to the foot control and is capped by a speed-control slide.

  • Move the slide right for a higher limit or left for a lower limit; the slide is explicitly limited to models 118 and 122.

Source evidence · 1 unique proof passage: Profile Proof E6

Can the needle stop position be changed?

conditional

A needle up/down button changes the needle stop position.

  • This control is explicitly limited to models 118 and 122.

Source evidence · 1 unique proof passage: Profile Proof E6

Care and ownership

How should the hook and feed teeth be cleaned?

conditional

Brush dust and lint from the feed teeth and hook-assembly area; a vacuum may also be used.

  • Turn off the machine and remove the foot, needle, needle plate, bobbin and bobbin case as directed.

Source evidence · 1 unique proof passage: Profile Proof E7

How should the exterior be cleaned?

conditional

Clean the exterior with a soft cloth and mild soap.

  • Turn off the machine first.

Source evidence · 1 unique proof passage: Profile Proof E7

What owner dismantling is allowed?

conditional

Do not dismantle the machine beyond the procedures explained in the owner-care section.

  • This is the OEM owner-maintenance boundary, not a service-manual procedure.

Source evidence · 1 unique proof passage: Profile Proof E7

Sources for the owner answers above
Official OEM PDF

What this passage supports

  • Do ordinary presser feet snap on?: Ordinary presser feet snap onto the machine’s presser-foot ankle.
  • How much extra presser-foot lift is available?: The presser-foot lift has an extra 0.6 cm (1/4 inch) raised position for heavy fabric or foot removal.
Pull the presser foot towards you. line up the cross pin on the foot between the spring and the presser foot ankle Press back until the foot snaps into place.
Document
EMERALD 116 / 118 / 122 Instruction Manual
Issuer
HUSQVARNA VIKING
Extraction
Native document text
PDF page
11
Open source
Open cited PDF at page 11Open OEM source or support page
Advanced technical receipt
Asset SHA-256
c88ed1f27fb7856f62192866effac72bd7fbac4634d385e1c02696e36da1296c
Locator
63bc3ac6686fd903f2744eb7e372ea611760cd548c85ca7072f6255f32f473d6
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Which needle system does it use?: Use standard household sewing-machine needles.
  • Which way does the needle face?: Push the needle fully upward with its flat side facing away from you.
  • When should the needle be replaced?: Do not use blunt or damaged needles; check frequently for barbed or blunt points.
Your machine uses standard sewing machine needles. Push up the new needle as far as it will go side away from you. Never use a blunt needle.
Document
EMERALD 116 / 118 / 122 Instruction Manual
Issuer
HUSQVARNA VIKING
Extraction
Native document text
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
c88ed1f27fb7856f62192866effac72bd7fbac4634d385e1c02696e36da1296c
Locator
6ba981628ba2d029726059bcc2a4051e6d36eeaaaf426d60a2f1adca758d20e7
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • How is the bobbin case reinstalled?: Insert the bobbin case with its knob next to the stopper in the hook-assembly area.
Insert the bobbin case into the hook assembly area. Make sure the knob of the bobbin case next to the stopper in the assembly area.
Document
EMERALD 116 / 118 / 122 Instruction Manual
Issuer
HUSQVARNA VIKING
Extraction
Native document text
PDF page
43
Open source
Open cited PDF at page 43Open OEM source or support page
Advanced technical receipt
Asset SHA-256
c88ed1f27fb7856f62192866effac72bd7fbac4634d385e1c02696e36da1296c
Locator
9551ce6683d621a7c9fdacc27a25940633ac79532fdc28a27113e69c9d4ce185
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • How is sewing speed controlled?: Sewing speed responds to the foot control and is capped by a speed-control slide.
  • Can the needle stop position be changed?: A needle up/down button changes the needle stop position.
Speed control slide (model 118 and 122) The harder you press the foot control, the faster the machine sews. Needle up/down (model 118 and 122)
Document
EMERALD 116 / 118 / 122 Instruction Manual
Issuer
HUSQVARNA VIKING
Extraction
Native document text
PDF page
8
Open source
Open cited PDF at page 8Open OEM source or support page
Advanced technical receipt
Asset SHA-256
c88ed1f27fb7856f62192866effac72bd7fbac4634d385e1c02696e36da1296c
Locator
bb263781d2590dc5b67ef37244f49989e7b29027e887f5b6c0555804f5a2a0b5
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • How is the bobbin inserted?: Place the bobbin in its case, guide thread through the front notch and tension spring, then into the side notch.
Place the bobbin in the bobbin case with the thread pulling off as illustrated. Guide the thread into the front notch Continue to draw the thread lightly until the thread slips into the side notch
Document
EMERALD 116 / 118 / 122 Instruction Manual
Issuer
HUSQVARNA VIKING
Extraction
Native document text
PDF page
15
Open source
Open cited PDF at page 15Open OEM source or support page
Advanced technical receipt
Asset SHA-256
c88ed1f27fb7856f62192866effac72bd7fbac4634d385e1c02696e36da1296c
Locator
bf0df9e69ba9bc08014fa2aa78607ce680583bc678de1e54e6f36ccf84f24b6d
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • How should the hook and feed teeth be cleaned?: Brush dust and lint from the feed teeth and hook-assembly area; a vacuum may also be used.
  • How should the exterior be cleaned?: Clean the exterior with a soft cloth and mild soap.
  • What owner dismantling is allowed?: Do not dismantle the machine beyond the procedures explained in the owner-care section.
Do not dismantle the machine other than as explained in this section. Clean the outside of the machine with a soft cloth and mild soap. Clean the feed teeth and hook assembly area with the lint brush. You may also use a vacuum cleaner.
Document
EMERALD 116 / 118 / 122 Instruction Manual
Issuer
HUSQVARNA VIKING
Extraction
Native document text
PDF page
42
Open source
Open cited PDF at page 42Open OEM source or support page
Advanced technical receipt
Asset SHA-256
c88ed1f27fb7856f62192866effac72bd7fbac4634d385e1c02696e36da1296c
Locator
e0141ae926bd0e0ed8f430e14084a42e2ab52d4306a356eb80aca2151834e2e5
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Does it have a free arm?: Free arm available after removing the extension table.
Free-arm sewing For stitching sleeves, waistbands, pant legs or any other tubular garments. pull it to the left.
Document
EMERALD 116 / 118 / 122 Instruction Manual
Issuer
HUSQVARNA VIKING
Extraction
Native document text
PDF page
5
Open source
Open cited PDF at page 5Open OEM source or support page
Advanced technical receipt
Asset SHA-256
c88ed1f27fb7856f62192866effac72bd7fbac4634d385e1c02696e36da1296c
Locator
fa129a62d617d896099ccb8629c30191e3469bb8b7d300d9af7506a89f2166e8
Destination status
direct_pdf
Machine facets and OEM groups

Cited machine facets

Identity and compatibility badges

Identity families, physical traits, and OEM accessory groups stay separate. A group badge applies only to its named program and domains.

presser foot mountsnap-on cross-pin · springneedle systemstandard sewing machine needlesOEM group · accessory, presser footHUSQVARNA VIKING Accessory Group: HUSQVARNA VIKING Group 5
Detailed specifications, compatible parts, and source library

Evidence coverage

Core answers and cited items

Machine category

domestic sewing

View machine-type evidence · 1 unique proof passage: Proof E5

View proof JSONReport this claim

Core domains answered: needle, presser foot

Domains with cited compatible items: bobbin (1), presser foot (35)

bobbin1 cited items; core not established
needleCore answer answered
presser footCore answer answered

Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.

Specifications

Documented machine facts

Multiple cited representations for one field share one row. SewGraph preserves every value and exact proof passage; it does not guess which representation is “raw” or “normalized” when the public projection does not label that distinction.

presser foot

presser foot mountsnap-on cross-pin/spring

View exact evidence · 1 unique proof passage: Proof E6

needle

needle systemstandard sewing machine needles

View exact evidence · 1 unique proof passage: Proof E7

Parts & accessories

36 documented relationships

A two-hop result joins the machine’s official accessory-group membership to the OEM part matrix. Open the evidence to inspect both hops.

36 relationships shown

bobbin · 1

Plastic Class 15 bobbin
68001389
compatible direct OEM claim
Why this fits

The OEM source directly names this machine or exact scope for this part.

Conditions: HUSQVARNA VIKING Accessory Group 5

Inspect complete evidence path · 1 unique proof passage: Proof E9

View proof JSONReport this claim

presser foot · 35

5 MM NARROW HEM FOOT
411851745
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E10

View proof JSONReport this claim
ADJUSTABLE ¼” FOOT WITH GUIDE
920456096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E11

View proof JSONReport this claim
MEGA PIPING FOOT
413195145
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E12

View proof JSONReport this claim
OPEN TOE FOOT
412800945
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E13

View proof JSONReport this claim
RIBBON FEET SET
920239096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E14

View proof JSONReport this claim
INVISIBLE ZIPPER FOOT
920458096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E15

View proof JSONReport this claim
ADJUSTABLE STITCH-IN-DITCH FOOT
920457096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E16

View proof JSONReport this claim
CLEAR ADJUSTABLE STITCH-IN-DITCH FOOT
920653096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E17

View proof JSONReport this claim
ADJUSTABLE BIAS BINDER
412985045
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E18

View proof JSONReport this claim
1/4" (6 MM) BIAS BINDER
412989545
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E19

View proof JSONReport this claim
BRAIDING FOOT
412989845
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E20

View proof JSONReport this claim
NARROW ZIPPER FOOT
412565745
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E21

View proof JSONReport this claim
9 GROOVE PIN TUCK FOOT
412370045
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E22

View proof JSONReport this claim
CLEAR PIPING FOOT
413097145
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E23

View proof JSONReport this claim
CLEAR B EDGE STITCHING FOOT
920624096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E24

View proof JSONReport this claim
SINGLE WELT CORD FOOT
412627045
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E25

View proof JSONReport this claim
CLEAR INVISIBLE ZIPPER FOOT
413286545
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E26

View proof JSONReport this claim
GATHERING FOOT
412797145
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E27

View proof JSONReport this claim
CLEAR ADJUSTABLE 1/4" PIECING FOOT WITH GUIDE
920652096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E28

View proof JSONReport this claim
JOIN AND FOLD EDGING FOOT
413248845
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E29

View proof JSONReport this claim
NON-STICK GLIDE FOOT H
412796145
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E30

View proof JSONReport this claim
CLEAR OPEN TOE FOOT
413031945
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E31

View proof JSONReport this claim
MINI PIPING FOOT
413183045
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E32

View proof JSONReport this claim
EDGE STITCHING FOOT
412796745
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E33

View proof JSONReport this claim
ROLLER FOOT
412990245
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E34

View proof JSONReport this claim
ADJUSTABLE 1/4" FOOT
920455096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E35

View proof JSONReport this claim
EDGING FOOT J
412380645
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E36

View proof JSONReport this claim
FLAT FELLED FOOT 9 MM
413185545
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E37

View proof JSONReport this claim
TRANSPARENT B FOOT
920622096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E38

View proof JSONReport this claim
ADJUSTABLE BLIND HEM FOOT
412976645
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E39

View proof JSONReport this claim
EDGE / JOINING FOOT
412796845
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E40

View proof JSONReport this claim
LEFT EDGE TOPSTITCH FOOT
920569096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E41

View proof JSONReport this claim
CLEAR B EDGE/JOINING FOOT
920623096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E42

View proof JSONReport this claim
7 GROOVE PIN TUCK FOOT
412362845
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E43

View proof JSONReport this claim
THREE HOLE YARN FOOT
413187045
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 5, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E8, Step 2 E44

View proof JSONReport this claim

OEM compatibility programs

Documented group memberships

Group codes are namespaced to the issuing OEM program and apply only to the cited domains. They are not machine series and do not prove compatibility outside those domains.

HUSQVARNA VIKING Group 5

HUSQVARNA VIKING Accessory Group · code 5

Applies to: accessory, presser foot

View machine-to-group evidence · 1 unique proof passage: Proof E8

View proof JSONReport this claim

Official source library

Documents used on this page

Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.

HUSQVARNA VIKING EMERALD 118 product page (archived 2015-02-09)

product page

Open official source destination · 1 unique proof passage: Proof E1

HUSQVARNA VIKING Accessory User's Guide 2024

accessory compatibility

Open official source destination · 1 unique proof passage: Proof E2

EMERALD 116 / 118 / 122 Instruction Manual

instruction

Open official source destination · 1 unique proof passage: Proof E3

Evidence library

44 exact proof passages from 3 OEM documents

Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.

Open exact proof passages · 44 unique proof passages
Official OEM PDF

What this passage proves

  • Identity — printed machine name: EMERALD 118
The EMERALD™ 118 is a machine ideal for all types of sewing; from a beautiful, one-of-a kind dress to curtains that duplicate those seen in a magazine. The EMERALD™ 118 sewing machine, has many practical features you will love; i.e. the built-in needle threader, a handy Sewing Guide Reference Chart, a hard cover for storage and an effortless one-step buttonhole.
Document
HUSQVARNA VIKING EMERALD 118 product page (archived 2015-02-09)
Issuer
HUSQVARNA VIKING
Extraction
native
Evidence edition
Archived OEM HTML · 2015-02-09T13:48:07+00:00
Open source
Open exact archived OEM pageOpen original OEM URL (current content may differ)
Advanced technical receipt
Asset SHA-256
69b4b236224beaa9d80e4bd992281216f642232f80bf26e0a988d950bd047942
Locator
3ffc246b5d12f2cad36768ebe7e00b45a1708bfd80187af4d31b5a5001b663ea
Destination status
archived_html
Official OEM PDF

What this passage proves

  • Identity — printed machine name: EMERALD 118
EMERALD™ 122, 118, 116.
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
5
Open source
Open cited PDF at page 5Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
9283593056348ca76eb14433a6b6c2bf9c5205b33b3919fd09081bc97adc34b9
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — preferred display name: EMERALD 118
  • Identity — model code: EMERALD 118
Emerald 118
Document
EMERALD 116 / 118 / 122 Instruction Manual
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
19
Open source
Open cited PDF at page 19Open OEM source or support page
Advanced technical receipt
Asset SHA-256
c88ed1f27fb7856f62192866effac72bd7fbac4634d385e1c02696e36da1296c
Locator
ed44f08588668f2a21d0c80cb3ddbe2ebd4e101da36f3d5df38a36f5bc91857b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: EMERALD 118
Emerald 118
Document
EMERALD 116 / 118 / 122 Instruction Manual
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
19
Open source
Open cited PDF at page 19Open OEM source or support page
Advanced technical receipt
Asset SHA-256
c88ed1f27fb7856f62192866effac72bd7fbac4634d385e1c02696e36da1296c
Locator
37ce3705416f0f3f9583b0dd5b23b2b6b9ac82c6352b51cd7a49f1d9e4da845b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Machine category — machine type: domestic sewing
the following: Read all instructions before using this household sewing machine.
Document
EMERALD 116 / 118 / 122 Instruction Manual
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
2
Open source
Open cited PDF at page 2Open OEM source or support page
Advanced technical receipt
Asset SHA-256
c88ed1f27fb7856f62192866effac72bd7fbac4634d385e1c02696e36da1296c
Locator
d9c604a9480b3f9a616a2317600666d86f2fc785b18da381f3ebc4fb52e989b8
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • presser foot fact — presser foot mount: snap-on cross-pin/spring
  • Presser foot answer — snap-on cross-pin/spring
To put foot on, line up the cross pin on the foot between the spring and the presser foot ankle. Press back until the foot snaps into place.
Document
EMERALD 116 / 118 / 122 Instruction Manual
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
11
Open source
Open cited PDF at page 11Open OEM source or support page
Advanced technical receipt
Asset SHA-256
c88ed1f27fb7856f62192866effac72bd7fbac4634d385e1c02696e36da1296c
Locator
a74a2f96aa8cbb7a5affd256411d290fb33c6924c4bd882936ce673b961b22b2
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • needle fact — needle system: standard sewing machine needles
  • Needle answer — standard sewing machine needles
Your machine uses standard sewing machine needles.
Document
EMERALD 116 / 118 / 122 Instruction Manual
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
c88ed1f27fb7856f62192866effac72bd7fbac4634d385e1c02696e36da1296c
Locator
08619d43338de1ae81378d3dd605445ecf4902f129f6930f48d9f801a1dc83fb
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • OEM program membership — HUSQVARNA VIKING Accessory Group: HUSQVARNA VIKING Group 5
  • Item fitment path — this machine's OEM group membership for 5 MM NARROW HEM FOOT
  • Item fitment path — this machine's OEM group membership for ADJUSTABLE ¼” FOOT WITH GUIDE
  • Item fitment path — this machine's OEM group membership for MEGA PIPING FOOT
  • Item fitment path — this machine's OEM group membership for OPEN TOE FOOT
  • Item fitment path — this machine's OEM group membership for RIBBON FEET SET
  • Item fitment path — this machine's OEM group membership for INVISIBLE ZIPPER FOOT
  • Item fitment path — this machine's OEM group membership for ADJUSTABLE STITCH-IN-DITCH FOOT
  • Item fitment path — this machine's OEM group membership for CLEAR ADJUSTABLE STITCH-IN-DITCH FOOT
  • Item fitment path — this machine's OEM group membership for ADJUSTABLE BIAS BINDER
  • Item fitment path — this machine's OEM group membership for 1/4" (6 MM) BIAS BINDER
  • Item fitment path — this machine's OEM group membership for BRAIDING FOOT
  • Item fitment path — this machine's OEM group membership for NARROW ZIPPER FOOT
  • Item fitment path — this machine's OEM group membership for 9 GROOVE PIN TUCK FOOT
  • Item fitment path — this machine's OEM group membership for CLEAR PIPING FOOT
  • Item fitment path — this machine's OEM group membership for CLEAR B EDGE STITCHING FOOT
  • Item fitment path — this machine's OEM group membership for SINGLE WELT CORD FOOT
  • Item fitment path — this machine's OEM group membership for CLEAR INVISIBLE ZIPPER FOOT
  • Item fitment path — this machine's OEM group membership for GATHERING FOOT
  • Item fitment path — this machine's OEM group membership for CLEAR ADJUSTABLE 1/4" PIECING FOOT WITH GUIDE
  • Item fitment path — this machine's OEM group membership for JOIN AND FOLD EDGING FOOT
  • Item fitment path — this machine's OEM group membership for NON-STICK GLIDE FOOT H
  • Item fitment path — this machine's OEM group membership for CLEAR OPEN TOE FOOT
  • Item fitment path — this machine's OEM group membership for MINI PIPING FOOT
  • Item fitment path — this machine's OEM group membership for EDGE STITCHING FOOT
  • Item fitment path — this machine's OEM group membership for ROLLER FOOT
  • Item fitment path — this machine's OEM group membership for ADJUSTABLE 1/4" FOOT
  • Item fitment path — this machine's OEM group membership for EDGING FOOT J
  • Item fitment path — this machine's OEM group membership for FLAT FELLED FOOT 9 MM
  • Item fitment path — this machine's OEM group membership for TRANSPARENT B FOOT
  • Item fitment path — this machine's OEM group membership for ADJUSTABLE BLIND HEM FOOT
  • Item fitment path — this machine's OEM group membership for EDGE / JOINING FOOT
  • Item fitment path — this machine's OEM group membership for LEFT EDGE TOPSTITCH FOOT
  • Item fitment path — this machine's OEM group membership for CLEAR B EDGE/JOINING FOOT
  • Item fitment path — this machine's OEM group membership for 7 GROOVE PIN TUCK FOOT
  • Item fitment path — this machine's OEM group membership for THREE HOLE YARN FOOT
5 PRELUDE™ 360, PRELUDE™ 340, 6 PLATINUM™ 955 E, 950 E, DAISY™ 335, 330, 325, 320, 315, PLATINUM™ Plus 775, 770, 310, HUSQVARNA® VIKING® 250, 755 Quilt, 750 Quilt, 735, 730, 230, 225/215, 210, 205, 715, ROSE™ 605, 600, IRIS™, SCANDINAVIA™ 100, ONYXTM LILY™ 555, 550, 545, 540, 535, 25, 15 EDEN ROSE™ 250M, 530, HUSQVARNA® VIKING® TRIBUTE™ 140M, 145M. 500, INTERLUDE™ 445, 435, EMERALD™ 122, 118, 116.
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
5
Open source
Open cited PDF at page 5Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
909ea37cba2adb8f54d40bde711a382caf6f8a763b0b3e98e46fb22bd41dcedc
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — bobbin: Plastic Class 15 bobbin (compatible)
BOBBIN PLASTIC 15 CLASS 68001389 for EMER ALD™ 122, 118, 116, 203, TRIBUTE™ 140M 145M, EDEN ROSE™ 250M, DESIGNER JADE™ 35 and JADE™ 20.
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
95
Open source
Open cited PDF at page 95Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
241c7d03273983cdafedc3e39176de73ea5d047850944d77098cf70405dc5b25
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 5 MM NARROW HEM FOOT (compatible)
411851745 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
25
Open source
Open cited PDF at page 25Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
fb90e99f43c432150a206672a01d4e6b00669655ab2dd9d5845bce9999fc659e
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ADJUSTABLE ¼” FOOT WITH GUIDE (compatible)
920456096 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
67
Open source
Open cited PDF at page 67Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
e76aa4d58ea0f1cc6777c3761f607e86b81d82dd2ba4865441232ffb55063e8b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: MEGA PIPING FOOT (compatible)
413195145 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
26
Open source
Open cited PDF at page 26Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
3346dc10623b18ec2d0a271c761f997c60b18cedbd8373350bfbbadca3d61888
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: OPEN TOE FOOT (compatible)
412800945 1 2 3 4 5 6 7 8
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
68
Open source
Open cited PDF at page 68Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
b493d5875dc77f086c840533aebb716e11378427cee47c4c42e718dcf74a1f4c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: RIBBON FEET SET (compatible)
920239096 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
44
Open source
Open cited PDF at page 44Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
01df0d2d006a03d6e71e5a8756d0e41bbb3ed773854f3e309ac82c2bf5489a8d
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: INVISIBLE ZIPPER FOOT (compatible)
920458096 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
13
Open source
Open cited PDF at page 13Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
5c39714e1d7da4b5359e8b71923e7ef848b1ec930e0a6608ee8755088559e0c0
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ADJUSTABLE STITCH-IN-DITCH FOOT (compatible)
920457096 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
66
Open source
Open cited PDF at page 66Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
ae82bf6d2eddb81e3656f99c5a00d93ab66a8497dbdda08e1b8a61aa964b2b8e
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR ADJUSTABLE STITCH-IN-DITCH FOOT (compatible)
920653096 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
66
Open source
Open cited PDF at page 66Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
ab07e7fd76231ed0b246f4f125ce280b2d9d5e695b384a8b1f68cd2d3178e9d9
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ADJUSTABLE BIAS BINDER (compatible)
412985045 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
24
Open source
Open cited PDF at page 24Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
b2efbf9a19724f90eb7a5c44385d3d056044bfe2ba085f4522cfa302601aea40
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 1/4" (6 MM) BIAS BINDER (compatible)
412989545 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
24
Open source
Open cited PDF at page 24Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
eb683ee50a77a257cefea3d7d04f0204de597e7d33f5c4047fc5d0fa0b1381e5
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BRAIDING FOOT (compatible)
412989845 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
37
Open source
Open cited PDF at page 37Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
75b37db4ca8e2fad3f8b6138d679aa694b12c43aeda817a4c9d7791d72f775f2
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: NARROW ZIPPER FOOT (compatible)
412565745 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
a57bee0c4cbac3b1afb72c4b7459a3033df48bda480450c20ac68403895dd5ec
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 9 GROOVE PIN TUCK FOOT (compatible)
412370045 1 2 3 4 5 6 7
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
51
Open source
Open cited PDF at page 51Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
aa3cfbe0a6f46c41ce3681d73a20f73fdb5b090b9ce854e3c5bfec71ce32f3bc
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR PIPING FOOT (compatible)
413097145 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
27
Open source
Open cited PDF at page 27Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
4e0fba0f8eebf26bfa79a51e56c1d3152eb0bfc8e1828a22d14f9e69f6440c43
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR B EDGE STITCHING FOOT (compatible)
920624096 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
48
Open source
Open cited PDF at page 48Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
1fa09a4a439525c89f1555d4486da1b07c284dff364b6653de22cea425c4f869
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: SINGLE WELT CORD FOOT (compatible)
412627045 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
22
Open source
Open cited PDF at page 22Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
be207f82d8efab444114e223afb8caf4ddf58b63f07a2c08fc97d15825220929
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR INVISIBLE ZIPPER FOOT (compatible)
413286545 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
14
Open source
Open cited PDF at page 14Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
1b25f3c3c65405c3fa61cd6b519353ac2ee7d376f253e47bd5bccc9bc645428d
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: GATHERING FOOT (compatible)
412797145 1 2 3 4 5 6 7 8
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
7eac6b56b20ff4e16388e0b582500fb1c34e3fb874cb2a81b6790edee7528cb0
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR ADJUSTABLE 1/4" PIECING FOOT WITH GUIDE (compatible)
920652096 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
65
Open source
Open cited PDF at page 65Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
1f9cb307429f5124f162380ea7ab6dd4d9f3ae400fd7cd3dd6befa0000459fcd
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: JOIN AND FOLD EDGING FOOT (compatible)
413248845 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
19
Open source
Open cited PDF at page 19Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
deef5ddb067de9d3cfc8b57eb0b000bfa9c074f690bb0b0c0c9a48dec493e95f
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: NON-STICK GLIDE FOOT H (compatible)
412796145 1 2 3 4 5 6 7 8
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
9
Open source
Open cited PDF at page 9Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
6dce46f24746e098fdfbd6017691d4912cf6f36d1dcf672140631a038eb54211
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR OPEN TOE FOOT (compatible)
413031945 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
68
Open source
Open cited PDF at page 68Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
944c68d82f1a57a8a7abaa0c18d6287ae6347880c7747a27752f8655d12ca5d6
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: MINI PIPING FOOT (compatible)
413183045 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
36
Open source
Open cited PDF at page 36Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
f130388c0e165d87fb13f26a6366efce67087373aa8d8df64866dbd6d172a39d
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: EDGE STITCHING FOOT (compatible)
412796745 1 2 3 4 5 6 7 8
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
18
Open source
Open cited PDF at page 18Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
c2c20f8184609337570ff49eacd3fe4af47a10855d1b8b071ec0d5cdbe9d3a40
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ROLLER FOOT (compatible)
412990245 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
9
Open source
Open cited PDF at page 9Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
b2ab0d267203591a24184ba9eade66b344ec7765be3710730108b4a632c16724
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ADJUSTABLE 1/4" FOOT (compatible)
920455096 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
63
Open source
Open cited PDF at page 63Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
64c0db5a306b20b31f2ab6bb0c2c714cea1dd6ea464f3a4fb96f9f2ba4ddf16f
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: EDGING FOOT J (compatible)
412380645 1 2 3 4 5 6 7 8
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
8
Open source
Open cited PDF at page 8Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
ef3a437f7f924bd50721e566712e660fc8c17f238bb141cf8381d5ff308c1296
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: FLAT FELLED FOOT 9 MM (compatible)
413185545 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
10
Open source
Open cited PDF at page 10Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
8545719a1baae083a1736c7f4d6692acc8c8069569cdca9ac201160ccf74cad0
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: TRANSPARENT B FOOT (compatible)
920622096 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
47
Open source
Open cited PDF at page 47Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
a95f292064fce4a1213afac7ecefadc00e3b5a4a730d291a317f8657a16f077e
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ADJUSTABLE BLIND HEM FOOT (compatible)
412976645 1 2 3 4 5 6 7 8
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
8
Open source
Open cited PDF at page 8Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
0abc29c726dd29f5e3f6c805bf3940b634217e3f43a8061a7692e580a92b6f8c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: EDGE / JOINING FOOT (compatible)
412796845 1 2 3 4 5 6 7 8
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
18
Open source
Open cited PDF at page 18Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
fcf43f4d3ea76ad4fef5ff166cfa426e4590699f58c3a2040a0b7bbca1281bc5
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: LEFT EDGE TOPSTITCH FOOT (compatible)
920569096 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
a71a23604badb3b341aed27c8f5776be537bdb90c7487dec71507959901fbf06
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR B EDGE/JOINING FOOT (compatible)
920623096 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
48
Open source
Open cited PDF at page 48Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
2f8fe4a8d707693237d111456505dedd9781ac25af07339a755e8e964996ad1f
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 7 GROOVE PIN TUCK FOOT (compatible)
412362845 1 2 3 4 5 6 7
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
51
Open source
Open cited PDF at page 51Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
8a60f7f1d197931c07799728a0457147ab1aea93689a4f84686d5a54919f3691
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: THREE HOLE YARN FOOT (compatible)
413187045 1 2 3 4 5 6 7 8
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
40
Open source
Open cited PDF at page 40Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
e09ed7e96a817a0bcbcc8208fe4682d1a790a1ad70f3aea7f500dfa568c372a9
Destination status
direct_pdf

What is supported, and what remains open?

1 supported answers and 12 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.

Unresolved owner questions (7)
  • Can the presser-foot holder be removed?: Not established — Not yet verified: The reviewed passages do not establish whether the presser-foot ankle or holder is owner-removable.
  • What shank type is it?: Not established — Not yet verified: The reviewed passages do not state a standardized low-, high- or other shank class.
  • Will regular low-shank screw-on feet fit?: Not established — Not yet verified: Snap-on attachment and the visible thumbscrew do not establish generic low-shank screw-on-foot compatibility.
  • Which third-party adapters fit?: Not established — Not yet verified: No third-party adapter compatibility is established.
  • Which bobbin class does it use?: Not established — Not yet verified: The reviewed passages do not state a standardized bobbin class or system.
  • What bobbin dimensions and material are required?: Not established — Not yet verified: Bobbin dimensions, profile, material and substitution equivalence are not established.
  • What hook system does it use?: Not established — Not yet verified: The manual names a hook-assembly area but does not establish standardized hook orientation or drive.

Report a correction or share an OEM source

Advanced provenance and dataset receipt

Public snapshot a1cc1aceef228fcf33329e37165ab888ce5b9fe3f13eb56967ae0fbf41d8d8a7

Catalog e156281c7d3048027b5ac89e7476be8f54dd5a9309505e96260b0455d3cd2a7e · exact native quotes only · dossier method sewgraph-model-dossier-v2