SewGraph

husqvarna viking · verified physical machine

JADE 20

View cited identity evidence · 5 unique proof passages

Jump to: Proof E1, Proof E2, Proof E3, Proof E4, Proof E5

verified exact machine · 1/3 core systems

Identity verified · evidence for each answer

Using and maintaining this machine

Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.

Presser feet and adapters

How do ordinary presser feet attach?

conditional

Native snap-on feet. Ordinary presser feet attach by aligning the foot's cross pin with the gap in the presser-foot ankle and pushing until the foot snaps into place.

  • This proves the manual's attachment procedure, not a standardized shank class, universal foot fit, or adapter compatibility.

Source evidence · 1 unique proof passage: Profile Proof E1

Bobbins and hook

How is a bobbin wound?

conditional

Follow the manual's exact thread-guide, tension-disc, bobbin-hole, spindle, and stop sequence when winding.

  • The cited sequence applies to the exact-machine bobbin path; it does not establish bobbin equivalence with other models.

Source evidence · 1 unique proof passage: Profile Proof E2

How is the bobbin inserted?

conditional

Insert the bobbin in the documented direction, route thread through the named guides and tension spring, cut excess thread, and replace the cover.

  • Use the exact orientation and route in the cited manual passage; no substitute class is inferred.

Source evidence · 1 unique proof passage: Profile Proof E3

Needles and threading

Which needle system applies?

conditional

The OEM recommends needle system 130/705H.

  • This is a recommendation, not an exclusive requirement. Match needle type and size to the fabric and thread guidance in the manual.

Source evidence · 1 unique proof passage: Profile Proof E4

Which way does the needle face?

supported

Push the needle fully upward with its flat side facing away from the operator, then tighten the needle screw.

Source evidence · 1 unique proof passage: Profile Proof E5

Care and ownership

Does it require owner oiling?

supported

No owner lubrication (oiling) is needed.

Source evidence · 1 unique proof passage: Profile Proof E6

How should it be cleaned?

conditional

Clean the machine and feed-teeth/bobbin area with the specified soft cloth and supplied brush; do not blow air into the bobbin-case area.

  • Turn the machine off and follow the manual's removal and replacement sequence before cleaning internal areas.

Source evidence · 1 unique proof passage: Profile Proof E6

Sources for the owner answers above
Official OEM PDF

What this passage supports

  • Which way does the needle face?: Push the needle fully upward with its flat side facing away from the operator, then tighten the needle screw.
flat side away from you until it will go no further
Document
HUSQVARNA VIKING Jade_20_manual_EN.pdf (SVP manuals feed)
Issuer
HUSQVARNA VIKING
Extraction
Native document text
PDF page
22
Open source
Open cited PDF at page 22Open OEM source or support page
Advanced technical receipt
Asset SHA-256
27899afe0c49d1b10cd904c653c7314fe7d5fd843a719f75fdc4f46870fcceb2
Locator
3b68776a4a6b8018080df50257394c083a85b130e30593352a75595a13435c21
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • How do ordinary presser feet attach?: Ordinary presser feet attach by aligning the foot's cross pin with the gap in the presser-foot ankle and pushing until the foot snaps into place.
Line up the cross pin on the foot with the gap in the presser foot ankle. foot snaps into place
Document
HUSQVARNA VIKING Jade_20_manual_EN.pdf (SVP manuals feed)
Issuer
HUSQVARNA VIKING
Extraction
Native document text
PDF page
22
Open source
Open cited PDF at page 22Open OEM source or support page
Advanced technical receipt
Asset SHA-256
27899afe0c49d1b10cd904c653c7314fe7d5fd843a719f75fdc4f46870fcceb2
Locator
3c06e70b9f3f14148552cfbc3a57b4ca85cf8f986efcf281c7d4ba611da6d6f7
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • How is a bobbin wound?: Follow the manual's exact thread-guide, tension-disc, bobbin-hole, spindle, and stop sequence when winding.
Pass thread under tension disc (F) in clockwise direction. Thread through the hole in the empty bobbin (G) from the inside to the outside.
Document
HUSQVARNA VIKING Jade_20_manual_EN.pdf (SVP manuals feed)
Issuer
HUSQVARNA VIKING
Extraction
Native document text
PDF page
18
Open source
Open cited PDF at page 18Open OEM source or support page
Advanced technical receipt
Asset SHA-256
27899afe0c49d1b10cd904c653c7314fe7d5fd843a719f75fdc4f46870fcceb2
Locator
3f61abadc4c603efd743833bc594d52d688536352f5865cbfbf024c480d7e4d2
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Which needle system applies?: The OEM recommends needle system 130/705H.
We recommend needles of system 130/705H.
Document
HUSQVARNA VIKING Jade_20_manual_EN.pdf (SVP manuals feed)
Issuer
HUSQVARNA VIKING
Extraction
Native document text
PDF page
21
Open source
Open cited PDF at page 21Open OEM source or support page
Advanced technical receipt
Asset SHA-256
27899afe0c49d1b10cd904c653c7314fe7d5fd843a719f75fdc4f46870fcceb2
Locator
a243ba9c07960c3dc37ded19010d584ad18bba0b9691e30e170c4bfc53dbc57e
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • How is the bobbin inserted?: Insert the bobbin in the documented direction, route thread through the named guides and tension spring, cut excess thread, and replace the cover.
Insert the bobbin in the bobbin case with the thread running in a counterclockwise direction.
Document
HUSQVARNA VIKING Jade_20_manual_EN.pdf (SVP manuals feed)
Issuer
HUSQVARNA VIKING
Extraction
Native document text
PDF page
19
Open source
Open cited PDF at page 19Open OEM source or support page
Advanced technical receipt
Asset SHA-256
27899afe0c49d1b10cd904c653c7314fe7d5fd843a719f75fdc4f46870fcceb2
Locator
b02e9bede92e64bb6b5be11e95d7e2783cda9ebd900d01fbb54b47a9ed32d4cf
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Does it require owner oiling?: No owner lubrication (oiling) is needed.
  • How should it be cleaned?: Clean the machine and feed-teeth/bobbin area with the specified soft cloth and supplied brush; do not blow air into the bobbin-case area.
No lubrication (oiling) is needed. Clean the feed teeth and bobbin area with the brush Do not blow air into the bobbin case area.
Document
HUSQVARNA VIKING Jade_20_manual_EN.pdf (SVP manuals feed)
Issuer
HUSQVARNA VIKING
Extraction
Native document text
PDF page
42
Open source
Open cited PDF at page 42Open OEM source or support page
Advanced technical receipt
Asset SHA-256
27899afe0c49d1b10cd904c653c7314fe7d5fd843a719f75fdc4f46870fcceb2
Locator
d8af300490ed396d245712896fa0439026f1840b20ec1d583e4ddfaa72112da0
Destination status
direct_pdf
Machine facets and OEM groups

Cited machine facets

Identity and compatibility badges

Identity families, physical traits, and OEM accessory groups stay separate. A group badge applies only to its named program and domains.

needle system130 · 705HOEM group · accessory, presser footHUSQVARNA VIKING Accessory Group: HUSQVARNA VIKING Group 6
Detailed specifications, compatible parts, and source library

Evidence coverage

Core answers and cited items

Machine category: Not yet established

Core domains answered: needle

Domains with cited compatible items: bobbin (1), presser foot (35)

Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.

Specifications

Documented machine facts

Multiple cited representations for one field share one row. SewGraph preserves every value and exact proof passage; it does not guess which representation is “raw” or “normalized” when the public projection does not label that distinction.

needle

needle system130/705H

View exact evidence · 1 unique proof passage: Proof E6

Parts & accessories

36 documented relationships

A two-hop result joins the machine’s official accessory-group membership to the OEM part matrix. Open the evidence to inspect both hops.

36 relationships shown

bobbin · 1

Plastic Class 15 bobbin
68001389
compatible direct OEM claim
Why this fits

The OEM source directly names this machine or exact scope for this part.

Conditions: HUSQVARNA VIKING Accessory Group 6

Inspect complete evidence path · 1 unique proof passage: Proof E8

View proof JSONReport this claim

presser foot · 35

EDGE / JOINING FOOT
412796845
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E9

View proof JSONReport this claim
INVISIBLE ZIPPER FOOT
920458096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E10

View proof JSONReport this claim
SINGLE WELT CORD FOOT
412627045
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E11

View proof JSONReport this claim
LEFT EDGE TOPSTITCH FOOT
920569096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E12

View proof JSONReport this claim
CLEAR ADJUSTABLE STITCH-IN-DITCH FOOT
920653096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E13

View proof JSONReport this claim
5 MM NARROW HEM FOOT
411851745
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E14

View proof JSONReport this claim
ROLLER FOOT
412990245
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E15

View proof JSONReport this claim
BRAIDING FOOT
412989845
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E16

View proof JSONReport this claim
ADJUSTABLE STITCH-IN-DITCH FOOT
920457096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E17

View proof JSONReport this claim
CLEAR OPEN TOE FOOT
413031945
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E18

View proof JSONReport this claim
MEGA PIPING FOOT
413195145
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E19

View proof JSONReport this claim
MINI PIPING FOOT
413183045
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E20

View proof JSONReport this claim
NARROW ZIPPER FOOT
412565745
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E21

View proof JSONReport this claim
FLAT FELLED FOOT 9 MM
413185545
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E22

View proof JSONReport this claim
CLEAR B EDGE STITCHING FOOT
920624096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E23

View proof JSONReport this claim
EDGE STITCHING FOOT
412796745
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E24

View proof JSONReport this claim
7 GROOVE PIN TUCK FOOT
412362845
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E25

View proof JSONReport this claim
1/4" (6 MM) BIAS BINDER
412989545
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E26

View proof JSONReport this claim
TRANSPARENT B FOOT
920622096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E27

View proof JSONReport this claim
CLEAR INVISIBLE ZIPPER FOOT
413286545
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E28

View proof JSONReport this claim
ADJUSTABLE BLIND HEM FOOT
412976645
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E29

View proof JSONReport this claim
ADJUSTABLE ¼” FOOT WITH GUIDE
920456096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E30

View proof JSONReport this claim
EDGING FOOT J
412380645
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E31

View proof JSONReport this claim
9 GROOVE PIN TUCK FOOT
412370045
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E32

View proof JSONReport this claim
THREE HOLE YARN FOOT
413187045
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E33

View proof JSONReport this claim
ADJUSTABLE BIAS BINDER
412985045
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E34

View proof JSONReport this claim
JOIN AND FOLD EDGING FOOT
413248845
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E35

View proof JSONReport this claim
NON-STICK GLIDE FOOT H
412796145
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E36

View proof JSONReport this claim
ADJUSTABLE 1/4" FOOT
920455096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E37

View proof JSONReport this claim
RIBBON FEET SET
920239096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E38

View proof JSONReport this claim
CLEAR PIPING FOOT
413097145
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E39

View proof JSONReport this claim
CLEAR ADJUSTABLE 1/4" PIECING FOOT WITH GUIDE
920652096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E40

View proof JSONReport this claim
CLEAR B EDGE/JOINING FOOT
920623096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E41

View proof JSONReport this claim
OPEN TOE FOOT
412800945
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E42

View proof JSONReport this claim
GATHERING FOOT
412797145
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in HUSQVARNA VIKING Accessory Group · HUSQVARNA VIKING Group 6, and the OEM matrix lists this part for that group. Edition 2024. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E43

View proof JSONReport this claim

OEM compatibility programs

Documented group memberships

Group codes are namespaced to the issuing OEM program and apply only to the cited domains. They are not machine series and do not prove compatibility outside those domains.

HUSQVARNA VIKING Group 6

HUSQVARNA VIKING Accessory Group · code 6

Applies to: accessory, presser foot

View machine-to-group evidence · 1 unique proof passage: Proof E7

View proof JSONReport this claim

Official source library

Documents used on this page

Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.

HUSQVARNA VIKING Jade_20_manual_EN.pdf (SVP manuals feed)

instruction manual

Open official source destination · 1 unique proof passage: Proof E1

HUSQVARNA VIKING Accessory User's Guide 2024

accessory compatibility

Open official source destination · 1 unique proof passage: Proof E4

HUSQVARNA VIKING JADE 20 product page (archived 2016-03-10)

product page

Open official source destination · 1 unique proof passage: Proof E2

HUSQVARNA® VIKING® JADE 20 Sewing Machine Manual

instruction manual

Open official source destination · 1 unique proof passage: Proof E3

Evidence library

43 exact proof passages from 4 OEM documents

Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.

Open exact proof passages · 43 unique proof passages
Official OEM PDF

What this passage proves

  • Identity — printed machine name: JADE 20
Note: Your HUSQVARNA VIKING® JADE™20 machine
Document
HUSQVARNA VIKING Jade_20_manual_EN.pdf (SVP manuals feed)
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
27899afe0c49d1b10cd904c653c7314fe7d5fd843a719f75fdc4f46870fcceb2
Locator
4e93a562e512105f2fcceae57921d5a7760cf85c8935b50156f91fcb697a858c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: JADE 20
A wide selection of easy snap-on presser feet are included with the HUSQVARNA VIKING® JADE™ 20 sewing machine, including the One-Step Buttonhole foot.
Document
HUSQVARNA VIKING JADE 20 product page (archived 2016-03-10)
Issuer
HUSQVARNA VIKING
Extraction
native
Evidence edition
Archived OEM HTML · 2016-03-10T05:08:41+00:00
Open source
Open exact archived OEM pageOpen original OEM URL (current content may differ)
Advanced technical receipt
Asset SHA-256
331e0ed05741335d0e4031ee87ec82c2a91bc5ef8b17bbe91ad36e9f950be517
Locator
f0c0cecaa8b4118c437e9d1876add9642a24d43d13a915087c68d4820391f5ad
Destination status
archived_html
Official OEM PDF

What this passage proves

  • Identity — printed machine name: JADE 20
Note: Your HUSQVARNA VIKING® JADE™20 machine
Document
HUSQVARNA® VIKING® JADE 20 Sewing Machine Manual
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
7b611ec3d5b5b847d44d51efe1a3163d1f3ecedda7526bf4f7a6a6dd85ecdaee
Locator
0d85190c69d1eb6fb398643f8450ea15fb66f16f8a137443ff4c8f322e742b72
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: JADE 20
JADE™ 20
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
5
Open source
Open cited PDF at page 5Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
adad4a62607863e34d9740aae25abaa2b6a9d5fa5f09dfb5d5b872ccff512b60
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — model code: JADE 20
  • Identity — preferred display name: JADE 20
JADE™ 20
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
5
Open source
Open cited PDF at page 5Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
1a261e7283fe891e816d3fe54346013462a4acc1bdf60311a6f1b5bf6aec87f7
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • needle fact — needle system: 130/705H
  • Needle answer — 130/705H
Use needle system 130/705 H.
Document
HUSQVARNA VIKING Jade_20_manual_EN.pdf (SVP manuals feed)
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
43
Open source
Open cited PDF at page 43Open OEM source or support page
Advanced technical receipt
Asset SHA-256
27899afe0c49d1b10cd904c653c7314fe7d5fd843a719f75fdc4f46870fcceb2
Locator
aa8cca02a6ebd45e653c470a8c3a2319d9964c36c86e064f3e1bb4fdb8bcbab7
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • OEM program membership — HUSQVARNA VIKING Accessory Group: HUSQVARNA VIKING Group 6
  • Item fitment path — this machine's OEM group membership for EDGE / JOINING FOOT
  • Item fitment path — this machine's OEM group membership for INVISIBLE ZIPPER FOOT
  • Item fitment path — this machine's OEM group membership for SINGLE WELT CORD FOOT
  • Item fitment path — this machine's OEM group membership for LEFT EDGE TOPSTITCH FOOT
  • Item fitment path — this machine's OEM group membership for CLEAR ADJUSTABLE STITCH-IN-DITCH FOOT
  • Item fitment path — this machine's OEM group membership for 5 MM NARROW HEM FOOT
  • Item fitment path — this machine's OEM group membership for ROLLER FOOT
  • Item fitment path — this machine's OEM group membership for BRAIDING FOOT
  • Item fitment path — this machine's OEM group membership for ADJUSTABLE STITCH-IN-DITCH FOOT
  • Item fitment path — this machine's OEM group membership for CLEAR OPEN TOE FOOT
  • Item fitment path — this machine's OEM group membership for MEGA PIPING FOOT
  • Item fitment path — this machine's OEM group membership for MINI PIPING FOOT
  • Item fitment path — this machine's OEM group membership for NARROW ZIPPER FOOT
  • Item fitment path — this machine's OEM group membership for FLAT FELLED FOOT 9 MM
  • Item fitment path — this machine's OEM group membership for CLEAR B EDGE STITCHING FOOT
  • Item fitment path — this machine's OEM group membership for EDGE STITCHING FOOT
  • Item fitment path — this machine's OEM group membership for 7 GROOVE PIN TUCK FOOT
  • Item fitment path — this machine's OEM group membership for 1/4" (6 MM) BIAS BINDER
  • Item fitment path — this machine's OEM group membership for TRANSPARENT B FOOT
  • Item fitment path — this machine's OEM group membership for CLEAR INVISIBLE ZIPPER FOOT
  • Item fitment path — this machine's OEM group membership for ADJUSTABLE BLIND HEM FOOT
  • Item fitment path — this machine's OEM group membership for ADJUSTABLE ¼” FOOT WITH GUIDE
  • Item fitment path — this machine's OEM group membership for EDGING FOOT J
  • Item fitment path — this machine's OEM group membership for 9 GROOVE PIN TUCK FOOT
  • Item fitment path — this machine's OEM group membership for THREE HOLE YARN FOOT
  • Item fitment path — this machine's OEM group membership for ADJUSTABLE BIAS BINDER
  • Item fitment path — this machine's OEM group membership for JOIN AND FOLD EDGING FOOT
  • Item fitment path — this machine's OEM group membership for NON-STICK GLIDE FOOT H
  • Item fitment path — this machine's OEM group membership for ADJUSTABLE 1/4" FOOT
  • Item fitment path — this machine's OEM group membership for RIBBON FEET SET
  • Item fitment path — this machine's OEM group membership for CLEAR PIPING FOOT
  • Item fitment path — this machine's OEM group membership for CLEAR ADJUSTABLE 1/4" PIECING FOOT WITH GUIDE
  • Item fitment path — this machine's OEM group membership for CLEAR B EDGE/JOINING FOOT
  • Item fitment path — this machine's OEM group membership for OPEN TOE FOOT
  • Item fitment path — this machine's OEM group membership for GATHERING FOOT
6 PLATINUM™ 955 E, 950 E, DAISY™ 335, 330, 325, 320, 315, PLATINUM™ Plus 775, 770, 310, HUSQVARNA® VIKING® 250, 755 Quilt, 750 Quilt, 735, 730, 230, 225/215, 210, 205, 715, ROSE™ 605, 600, IRIS™, SCANDINAVIA™ 100, ONYXTM LILY™ 555, 550, 545, 540, 535, 25, 15 EDEN ROSE™ 250M, 530, HUSQVARNA® VIKING® TRIBUTE™ 140M, 145M. 500, INTERLUDE™ 445, 435, EMERALD™ 122, 118, 116. FREESIA™ 425, 415, HUSQVARNA® VIKING® 400, 350, SCANDINAVIA™ 400, 300, 200, EMERALD™ 203, 183. DESIGNER JADE™ 35. JADE™ 20
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
5
Open source
Open cited PDF at page 5Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
51a80dc79f9fdf231c7f61bec44493c959b99141e0eb3e99e7a876dcde70ceca
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — bobbin: Plastic Class 15 bobbin (compatible)
BOBBIN PLASTIC 15 CLASS 68001389 for EMER ALD™ 122, 118, 116, 203, TRIBUTE™ 140M 145M, EDEN ROSE™ 250M, DESIGNER JADE™ 35 and JADE™ 20.
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
95
Open source
Open cited PDF at page 95Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
241c7d03273983cdafedc3e39176de73ea5d047850944d77098cf70405dc5b25
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: EDGE / JOINING FOOT (compatible)
412796845 1 2 3 4 5 6 7 8
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
18
Open source
Open cited PDF at page 18Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
fcf43f4d3ea76ad4fef5ff166cfa426e4590699f58c3a2040a0b7bbca1281bc5
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: INVISIBLE ZIPPER FOOT (compatible)
920458096 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
13
Open source
Open cited PDF at page 13Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
5c39714e1d7da4b5359e8b71923e7ef848b1ec930e0a6608ee8755088559e0c0
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: SINGLE WELT CORD FOOT (compatible)
412627045 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
22
Open source
Open cited PDF at page 22Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
be207f82d8efab444114e223afb8caf4ddf58b63f07a2c08fc97d15825220929
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: LEFT EDGE TOPSTITCH FOOT (compatible)
920569096 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
a71a23604badb3b341aed27c8f5776be537bdb90c7487dec71507959901fbf06
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR ADJUSTABLE STITCH-IN-DITCH FOOT (compatible)
920653096 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
66
Open source
Open cited PDF at page 66Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
ab07e7fd76231ed0b246f4f125ce280b2d9d5e695b384a8b1f68cd2d3178e9d9
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 5 MM NARROW HEM FOOT (compatible)
411851745 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
25
Open source
Open cited PDF at page 25Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
fb90e99f43c432150a206672a01d4e6b00669655ab2dd9d5845bce9999fc659e
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ROLLER FOOT (compatible)
412990245 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
9
Open source
Open cited PDF at page 9Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
b2ab0d267203591a24184ba9eade66b344ec7765be3710730108b4a632c16724
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BRAIDING FOOT (compatible)
412989845 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
37
Open source
Open cited PDF at page 37Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
75b37db4ca8e2fad3f8b6138d679aa694b12c43aeda817a4c9d7791d72f775f2
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ADJUSTABLE STITCH-IN-DITCH FOOT (compatible)
920457096 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
66
Open source
Open cited PDF at page 66Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
ae82bf6d2eddb81e3656f99c5a00d93ab66a8497dbdda08e1b8a61aa964b2b8e
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR OPEN TOE FOOT (compatible)
413031945 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
68
Open source
Open cited PDF at page 68Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
944c68d82f1a57a8a7abaa0c18d6287ae6347880c7747a27752f8655d12ca5d6
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: MEGA PIPING FOOT (compatible)
413195145 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
26
Open source
Open cited PDF at page 26Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
3346dc10623b18ec2d0a271c761f997c60b18cedbd8373350bfbbadca3d61888
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: MINI PIPING FOOT (compatible)
413183045 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
36
Open source
Open cited PDF at page 36Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
f130388c0e165d87fb13f26a6366efce67087373aa8d8df64866dbd6d172a39d
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: NARROW ZIPPER FOOT (compatible)
412565745 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
a57bee0c4cbac3b1afb72c4b7459a3033df48bda480450c20ac68403895dd5ec
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: FLAT FELLED FOOT 9 MM (compatible)
413185545 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
10
Open source
Open cited PDF at page 10Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
8545719a1baae083a1736c7f4d6692acc8c8069569cdca9ac201160ccf74cad0
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR B EDGE STITCHING FOOT (compatible)
920624096 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
48
Open source
Open cited PDF at page 48Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
1fa09a4a439525c89f1555d4486da1b07c284dff364b6653de22cea425c4f869
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: EDGE STITCHING FOOT (compatible)
412796745 1 2 3 4 5 6 7 8
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
18
Open source
Open cited PDF at page 18Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
c2c20f8184609337570ff49eacd3fe4af47a10855d1b8b071ec0d5cdbe9d3a40
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 7 GROOVE PIN TUCK FOOT (compatible)
412362845 1 2 3 4 5 6 7
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
51
Open source
Open cited PDF at page 51Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
8a60f7f1d197931c07799728a0457147ab1aea93689a4f84686d5a54919f3691
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 1/4" (6 MM) BIAS BINDER (compatible)
412989545 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
24
Open source
Open cited PDF at page 24Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
eb683ee50a77a257cefea3d7d04f0204de597e7d33f5c4047fc5d0fa0b1381e5
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: TRANSPARENT B FOOT (compatible)
920622096 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
47
Open source
Open cited PDF at page 47Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
a95f292064fce4a1213afac7ecefadc00e3b5a4a730d291a317f8657a16f077e
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR INVISIBLE ZIPPER FOOT (compatible)
413286545 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
14
Open source
Open cited PDF at page 14Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
1b25f3c3c65405c3fa61cd6b519353ac2ee7d376f253e47bd5bccc9bc645428d
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ADJUSTABLE BLIND HEM FOOT (compatible)
412976645 1 2 3 4 5 6 7 8
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
8
Open source
Open cited PDF at page 8Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
0abc29c726dd29f5e3f6c805bf3940b634217e3f43a8061a7692e580a92b6f8c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ADJUSTABLE ¼” FOOT WITH GUIDE (compatible)
920456096 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
67
Open source
Open cited PDF at page 67Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
e76aa4d58ea0f1cc6777c3761f607e86b81d82dd2ba4865441232ffb55063e8b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: EDGING FOOT J (compatible)
412380645 1 2 3 4 5 6 7 8
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
8
Open source
Open cited PDF at page 8Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
ef3a437f7f924bd50721e566712e660fc8c17f238bb141cf8381d5ff308c1296
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 9 GROOVE PIN TUCK FOOT (compatible)
412370045 1 2 3 4 5 6 7
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
51
Open source
Open cited PDF at page 51Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
aa3cfbe0a6f46c41ce3681d73a20f73fdb5b090b9ce854e3c5bfec71ce32f3bc
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: THREE HOLE YARN FOOT (compatible)
413187045 1 2 3 4 5 6 7 8
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
40
Open source
Open cited PDF at page 40Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
e09ed7e96a817a0bcbcc8208fe4682d1a790a1ad70f3aea7f500dfa568c372a9
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ADJUSTABLE BIAS BINDER (compatible)
412985045 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
24
Open source
Open cited PDF at page 24Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
b2efbf9a19724f90eb7a5c44385d3d056044bfe2ba085f4522cfa302601aea40
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: JOIN AND FOLD EDGING FOOT (compatible)
413248845 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
19
Open source
Open cited PDF at page 19Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
deef5ddb067de9d3cfc8b57eb0b000bfa9c074f690bb0b0c0c9a48dec493e95f
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: NON-STICK GLIDE FOOT H (compatible)
412796145 1 2 3 4 5 6 7 8
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
9
Open source
Open cited PDF at page 9Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
6dce46f24746e098fdfbd6017691d4912cf6f36d1dcf672140631a038eb54211
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ADJUSTABLE 1/4" FOOT (compatible)
920455096 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
63
Open source
Open cited PDF at page 63Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
64c0db5a306b20b31f2ab6bb0c2c714cea1dd6ea464f3a4fb96f9f2ba4ddf16f
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: RIBBON FEET SET (compatible)
920239096 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
44
Open source
Open cited PDF at page 44Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
01df0d2d006a03d6e71e5a8756d0e41bbb3ed773854f3e309ac82c2bf5489a8d
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR PIPING FOOT (compatible)
413097145 1 2 3 4 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
27
Open source
Open cited PDF at page 27Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
4e0fba0f8eebf26bfa79a51e56c1d3152eb0bfc8e1828a22d14f9e69f6440c43
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR ADJUSTABLE 1/4" PIECING FOOT WITH GUIDE (compatible)
920652096 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
65
Open source
Open cited PDF at page 65Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
1f9cb307429f5124f162380ea7ab6dd4d9f3ae400fd7cd3dd6befa0000459fcd
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR B EDGE/JOINING FOOT (compatible)
920623096 5 6 7 8 9
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
48
Open source
Open cited PDF at page 48Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
2f8fe4a8d707693237d111456505dedd9781ac25af07339a755e8e964996ad1f
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: OPEN TOE FOOT (compatible)
412800945 1 2 3 4 5 6 7 8
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
68
Open source
Open cited PDF at page 68Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
b493d5875dc77f086c840533aebb716e11378427cee47c4c42e718dcf74a1f4c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: GATHERING FOOT (compatible)
412797145 1 2 3 4 5 6 7 8
Document
HUSQVARNA VIKING Accessory User's Guide 2024
Issuer
HUSQVARNA VIKING
Extraction
native
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
8bfcee362bc8484f531f44efc6d3691d4d21686d9d001b01feab2553861234e9
Locator
7eac6b56b20ff4e16388e0b582500fb1c34e3fb874cb2a81b6790edee7528cb0
Destination status
direct_pdf

What is supported, and what remains open?

2 supported answers and 5 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.

Unresolved owner questions (5)
  • What shank type is it?: Not established — Not yet verified: The reviewed manual passage does not name a standardized shank class.
  • Which third-party adapters fit?: Not established — Not yet verified: The reviewed manual does not establish third-party adapter compatibility.
  • Which bobbin class or system applies?: Not established — Not yet verified: The reviewed passages do not establish a standardized bobbin class or cross-brand equivalent.
  • What bobbin dimensions and material apply?: Not established — Not yet verified: The reviewed passages do not establish bobbin dimensions, profile, and material.
  • What hook system applies?: Not established — Not yet verified: The reviewed passages do not name a standardized hook system.

Report a correction or share an OEM source

Advanced provenance and dataset receipt

Public snapshot a1cc1aceef228fcf33329e37165ab888ce5b9fe3f13eb56967ae0fbf41d8d8a7

Catalog e156281c7d3048027b5ac89e7476be8f54dd5a9309505e96260b0455d3cd2a7e · exact native quotes only · dossier method sewgraph-model-dossier-v2