Insertion orientation
conditional
Insert with the flat side to the rear.
Source evidence · 1 unique proof passage: Profile Proof E1
janome · verified physical machine
Continental M17
Cited model code CM17
View cited identity evidence · 5 unique proof passages
verified exact machine · 2/3 core systems
Identity verified · evidence for each answer
Using and maintaining this machine
Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.
Needles and threading
Insertion depth
conditional
Push the needle up against the stopper pin.
Source evidence · 1 unique proof passage: Profile Proof E1
Bobbins and hook
Thread direction
conditional
Place it in the holder with thread running off counterclockwise.
Source evidence · 1 unique proof passage: Profile Proof E2
Care and ownership
Hook cleaning frequency
conditional
Clean the hook area frequently.
Source evidence · 1 unique proof passage: Profile Proof E3
Bobbin holder cleaning
conditional
Brush the holder, then use the included cleaner on a soft cloth to wipe inside and outside.
Source evidence · 1 unique proof passage: Profile Proof E3
Feed system cleaning
conditional
Brush the feed dogs, automatic thread cutter and area around the bobbin-thread sensor.
Source evidence · 1 unique proof passage: Profile Proof E3
Hook race cleaning
conditional
Clean the hook race with a soft cloth.
Source evidence · 1 unique proof passage: Profile Proof E3
Sources for the owner answers above
Official OEM PDF
What this passage supports
- Hook cleaning frequency: Clean the hook area frequently.
- Bobbin holder cleaning: Brush the holder, then use the included cleaner on a soft cloth to wipe inside and outside.
- Feed system cleaning: Brush the feed dogs, automatic thread cutter and area around the bobbin-thread sensor.
- Hook race cleaning: Clean the hook race with a soft cloth.
Clean the hook area frequently. Clean the bobbin holder with a lint brush. Apply a few drops of the bobbin holder cleaner to a soft cloth and wipe the bobbin holder both inside and outside. Clean the feed dogs, auto thread cutter device and around the bobbin thread detecting sensor with the lint brush. Clean the hook race with a soft cloth.
- Document
- Janome Continental M17 ordinary sewing instruction book version 2
- Issuer
- Janome
- Extraction
- Visually verified transcription of a scanned page
- Visual verification
- Checked 2026-09-13T14:55:00Z. The page image and transcription are hash-bound in the evidence record.
- PDF page
- 178
- Open source
Advanced technical receipt
- Asset SHA-256
- cbfb848bea1e73642f08313855e8ef2a47dff3803b40e00db324dc9cbabe437b
- Locator
- 34ed429e036ee3a3cb13a64af26981b1a0abda59ed75ba6c903c9eba00b9d242
- Destination status
- direct_pdf
Official OEM PDF
What this passage supports
- Insertion orientation: Insert with the flat side to the rear.
- Insertion depth: Push the needle up against the stopper pin.
Insert a new needle into the needle clamp with the flat side of the needle to the rear. When inserting the needle into the needle clamp, push it up against the stopper pin.
- Document
- Janome Continental M17 ordinary sewing instruction book version 2
- Issuer
- Janome
- Extraction
- Visually verified transcription of a scanned page
- Visual verification
- Checked 2026-09-13T14:55:00Z. The page image and transcription are hash-bound in the evidence record.
- PDF page
- 29
- Open source
Advanced technical receipt
- Asset SHA-256
- cbfb848bea1e73642f08313855e8ef2a47dff3803b40e00db324dc9cbabe437b
- Locator
- 9ae7121a671a1cc19e984daf964dbb9179eab29fc72d3a8998ca8e84654a46ac
- Destination status
- direct_pdf
Official OEM PDF
What this passage supports
- Thread direction: Place it in the holder with thread running off counterclockwise.
Place the bobbin in the bobbin holder with the thread running off counterclockwise as shown on the hook cover plate.
- Document
- Janome Continental M17 ordinary sewing instruction book version 2
- Issuer
- Janome
- Extraction
- Visually verified transcription of a scanned page
- Visual verification
- Checked 2026-09-13T14:55:00Z. The page image and transcription are hash-bound in the evidence record.
- PDF page
- 34
- Open source
Advanced technical receipt
- Asset SHA-256
- cbfb848bea1e73642f08313855e8ef2a47dff3803b40e00db324dc9cbabe437b
- Locator
- cb5101a61e6128a97ebd5e1f9383ea2a3c977bd8ccece4a601aec28178bc5550
- Destination status
- direct_pdf
Machine facets and OEM groups
Cited machine facets
Identity and compatibility badges
Identity families, physical traits, and OEM accessory groups stay separate. A group badge applies only to its named program and domains.
maximum stitch width mm9integrated dual feed systemacufeedbobbin classJanome J plastic bobbin for horizontal hook machinesattachment systempresser-foot pin into foot-holder grooveOEM group · accessory, presser footJanome Accessory Compatibility Category: Janome Category N
Detailed specifications, compatible parts, and source library
Evidence coverage
Core answers and cited items
Machine category
domestic sewing embroidery
View machine-type evidence · 1 unique proof passage: Proof E6
Core domains answered: bobbin, presser foot
Domains with cited compatible items: presser foot (3)
| bobbin | Core answer answered |
|---|---|
| needle | Reviewed — not established |
| presser foot | Core answer answered |
Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.
Bobbin compatibility family
Source-local requirement
This groups exact wording from this manufacturer only. It does not claim that similarly named bobbins from another brand are interchangeable.
Janome J plastic bobbin for horizontal hook machines
Source-local family: Janome J plastic horizontal-hook family
Use J plastic bobbins; other/pre-wound paper bobbins may damage the holder; do not use easy or metal bobbins.
Do not substitute: The OEM source explicitly preserves the restriction above.
View Bobbin family evidence · 1 unique proof passage: Proof E9
Specifications
Documented machine facts
Multiple cited representations for one field share one row. SewGraph preserves every value and exact proof passage; it does not guess which representation is “raw” or “normalized” when the public projection does not label that distinction.
presser foot
| maximum stitch width mm | 9 View exact evidence · 1 unique proof passage: Proof E7 |
|---|---|
| integrated dual feed system | acufeed View exact evidence · 1 unique proof passage: Proof E7 |
| presser foot shank height | High View exact evidence · 1 unique proof passage: Proof E8 |
| attachment system | presser-foot pin into foot-holder groove View exact evidence · 1 unique proof passage: Proof E10 |
bobbin
| bobbin class | Janome J plastic bobbin for horizontal hook machines Conditions: Do not use the easy bobbin or metal bobbins.; Use “J” plastic bobbins for the horizontal hook machines (marked with “J” r).; Using other bobbins, such as pre-wound paper bobbins, may cause stitching problems and/or damage to the bobbin holder. View exact evidence · 1 unique proof passage: Proof E9 |
|---|
Parts & accessories
3 documented relationships
A two-hop result joins the machine’s official accessory-group membership to the OEM part matrix. Open the evidence to inspect both hops.
3 relationships shown
presser foot · 3
(Dual feed foot with Dual feed holder)
202-128-007
202-128-007
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category N, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E11, Step 2 E12
(Dual feed foot with Dual feed holder)
202-127-006
202-127-006
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category N, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E11, Step 2 E13
ULTRA GLIDE NEEDLE PLATE & ULTRA GLIDE FOOT
202-201-005
202-201-005
compatible two-hop OEM matrix
Why this fits
Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category N, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.
Inspect complete evidence path · 2 unique proof passages: Step 1 E11, Step 2 E14
OEM compatibility programs
Documented group memberships
Group codes are namespaced to the issuing OEM program and apply only to the cited domains. They are not machine series and do not prove compatibility outside those domains.
Janome Category N
Janome Accessory Compatibility Category · code N
Applies to: accessory, presser foot
View machine-to-group evidence · 1 unique proof passage: Proof E11
Official source library
Documents used on this page
Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.
Janome Global Sewing Machine Accessories Catalog
accessory compatibility
Open official source destination · 1 unique proof passage: Proof E3
Janome Global Accessories Catalog
accessory catalog
Open official source destination · 1 unique proof passage: Proof E1
Janome Continental M17 ordinary sewing instruction book version 2
instruction
Open official source destination · 1 unique proof passage: Proof E4
Evidence library
14 exact proof passages from 3 OEM documents
Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.
Open exact proof passages · 14 unique proof passages
Official OEM PDF
What this passage proves
- Identity — preferred display name: CM17
- Identity — model code: CM17
CM17 N Sewing models 9 mm High Yes with Acufeed (9 mm)
- Document
- Janome Global Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 6
- Open source
Advanced technical receipt
- Asset SHA-256
- 896123f19932823c009a23ae608dbdddf35b675f54937023871be4fe210837b1
- Locator
- 2e2723d269a37563185da2fb931be69ab0c1dec27ae1a409549215fe1994c298
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Identity — printed machine name: CM17
CM17 N Sewing models 9 mm High Yes with Acufeed (9 mm)
- Document
- Janome Global Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 6
- Open source
Advanced technical receipt
- Asset SHA-256
- 896123f19932823c009a23ae608dbdddf35b675f54937023871be4fe210837b1
- Locator
- 2633baba6682f03f6c777b402e2e1296f7da97fa1bbc5876905d71e8262119d2
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Identity — printed machine name: CM17
CM17
- Document
- Janome Global Sewing Machine Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 6
- Open source
Advanced technical receipt
- Asset SHA-256
- 9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
- Locator
- 1ef90a601548bc7479a8ec65e666f0b88f1372688a8c3e06471fbc821a7bbbe9
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Identity — preferred display name: Continental M17
- Identity — model code: Continental M17
Continental M17
- Document
- Janome Continental M17 ordinary sewing instruction book version 2
- Issuer
- Janome
- Extraction
- native
- PDF page
- 1
- Open source
Advanced technical receipt
- Asset SHA-256
- cbfb848bea1e73642f08313855e8ef2a47dff3803b40e00db324dc9cbabe437b
- Locator
- 12d1fdad81954738ac1be82bc77c5919e4a897967148620f99cccccdc580a525
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Identity — printed machine name: Continental M17
Continental M17 (Ordinary sewing
- Document
- Janome Continental M17 ordinary sewing instruction book version 2
- Issuer
- Janome
- Extraction
- native
- PDF page
- 1
- Open source
Advanced technical receipt
- Asset SHA-256
- cbfb848bea1e73642f08313855e8ef2a47dff3803b40e00db324dc9cbabe437b
- Locator
- 7a3966c67e9bdc0951141e99bbf5ad2f430e901eba949870137e1f8a41acd205
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Machine category — machine type: domestic sewing embroidery
Sewing setting mode key Press the sewing setting mode key to enter the ordinary sewing setting mode. In this mode, you can customize the machine settings and options for ordinary sewing (refer to pages 169-170). q r Embroidery setting mode key In this mode, you can customize the machine settings and options for embroidery (refer to the Instruction book for Embroidery).
- Document
- Janome Continental M17 ordinary sewing instruction book version 2
- Issuer
- Janome
- Extraction
- native
- PDF page
- 167
- Open source
Advanced technical receipt
- Asset SHA-256
- cbfb848bea1e73642f08313855e8ef2a47dff3803b40e00db324dc9cbabe437b
- Locator
- 9f6695db657a0fb3eb9184595f599ca1e4f66bec6134aa2579d90e91d22ac954
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- presser foot fact — maximum stitch width mm: 9
- presser foot fact — integrated dual feed system: acufeed
CM17 N Sewing models 9 mm High Yes with Acufeed (9 mm)
- Document
- Janome Global Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 6
- Open source
Advanced technical receipt
- Asset SHA-256
- 896123f19932823c009a23ae608dbdddf35b675f54937023871be4fe210837b1
- Locator
- 538217bbea6e0a8f63417e379a1367a7383ac1a1997009363544d73671242032
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- presser foot fact — presser foot shank height: High
CM17
- Document
- Janome Global Sewing Machine Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 6
- Open source
Advanced technical receipt
- Asset SHA-256
- 9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
- Locator
- 670bcf6ee036717d14fd641f154857db3b485b6fee0ed900398cf52e269acf4b
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- bobbin fact — bobbin class: Janome J plastic bobbin for horizontal hook machines
- Bobbin answer — Janome J plastic bobbin for horizontal hook machines
Use “J” plastic bobbins for the horizontal hook machines (marked with “J” r). Using other bobbins, such as pre-wound paper bobbins, may cause stitching problems and/or damage to the bobbin holder. r • Do not use the easy bobbin or metal bobbins.
- Document
- Janome Continental M17 ordinary sewing instruction book version 2
- Issuer
- Janome
- Extraction
- native
- PDF page
- 31
- Open source
Advanced technical receipt
- Asset SHA-256
- cbfb848bea1e73642f08313855e8ef2a47dff3803b40e00db324dc9cbabe437b
- Locator
- 88daca368658e7710a21909d03cf69ac422c3421b69365561c4d960d46ae9e8f
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- presser foot fact — attachment system: presser-foot pin into foot-holder groove
- Presser foot answer — presser-foot pin into foot-holder groove
Place the presser foot so that the pin on the foot lies just under the groove of the foot holder. u Lower the presser bar to lock the foot in place.
- Document
- Janome Continental M17 ordinary sewing instruction book version 2
- Issuer
- Janome
- Extraction
- native
- PDF page
- 26
- Open source
Advanced technical receipt
- Asset SHA-256
- cbfb848bea1e73642f08313855e8ef2a47dff3803b40e00db324dc9cbabe437b
- Locator
- 1ddea59875f9b6189286307248824b9889a349e79337d31dc873373b5b456f0f
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- OEM program membership — Janome Accessory Compatibility Category: Janome Category N
- Item fitment path — this machine's OEM group membership for (Dual feed foot with Dual feed holder)
- Item fitment path — this machine's OEM group membership for ULTRA GLIDE NEEDLE PLATE & ULTRA GLIDE FOOT
CM17 N Sewing models 9 mm High Yes with Acufeed (9 mm)
- Document
- Janome Global Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 6
- Open source
Advanced technical receipt
- Asset SHA-256
- 896123f19932823c009a23ae608dbdddf35b675f54937023871be4fe210837b1
- Locator
- 86cadfe96fe56b46fa7fbb36d021a7173b6b9b76b04a2c732027d16f573b046f
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: (Dual feed foot with Dual feed holder) (compatible)
202-128-007 N P
- Document
- Janome Global Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 12
- Open source
Advanced technical receipt
- Asset SHA-256
- 896123f19932823c009a23ae608dbdddf35b675f54937023871be4fe210837b1
- Locator
- c3f52d7112170430e0535d23645bf0d2bbc1d521510671b8cf964b5621a76492
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: (Dual feed foot with Dual feed holder) (compatible)
202-127-006 N P
- Document
- Janome Global Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 12
- Open source
Advanced technical receipt
- Asset SHA-256
- 896123f19932823c009a23ae608dbdddf35b675f54937023871be4fe210837b1
- Locator
- 3cfde80f0cf6582045a314a3277a7f1c1f47204902d81cac8548ca99aeee795b
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Item fitment — presser foot: ULTRA GLIDE NEEDLE PLATE & ULTRA GLIDE FOOT (compatible)
202-201-005 N
- Document
- Janome Global Accessories Catalog
- Issuer
- Janome
- Extraction
- native
- PDF page
- 17
- Open source
Advanced technical receipt
- Asset SHA-256
- 896123f19932823c009a23ae608dbdddf35b675f54937023871be4fe210837b1
- Locator
- b716ee26b619a8d655dd5e8c047ea2ed2d9f8c698be1ff967dd96e6b36907f80
- Destination status
- direct_pdf
What is supported, and what remains open?
0 supported answers and 7 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.
Unresolved owner questions (0)
Advanced provenance and dataset receipt
Public snapshot a1cc1aceef228fcf33329e37165ab888ce5b9fe3f13eb56967ae0fbf41d8d8a7
Catalog e156281c7d3048027b5ac89e7476be8f54dd5a9309505e96260b0455d3cd2a7e · exact native quotes only · dossier method sewgraph-model-dossier-v2