SewGraph

janome · verified physical machine

MC350E

View cited identity evidence · 3 unique proof passages

Jump to: Proof E1, Proof E2, Proof E3

verified exact machine · core systems pending

Identity verified · evidence for each answer

Using and maintaining this machine

Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.

Bobbins and hook

Insertion direction

conditional

Place the bobbin so the thread runs off counterclockwise.

Source evidence · 1 unique proof passage: Profile Proof E1

Threading path

conditional

Guide the thread into the front notch, draw it left between the tension-spring blades and into the side notch, pull about 10 cm (4 inches) to the rear, then reattach the hook cover plate.

Source evidence · 1 unique proof passage: Profile Proof E1

Needles and threading

Insertion orientation

conditional

Insert the needle with its flat side to the rear.

Source evidence · 1 unique proof passage: Profile Proof E2

Insertion depth

conditional

Push the needle up as far as it will go and tighten the needle-clamp screw firmly.

  • Turn off power, raise the needle, and lower the presser foot before replacement.

Source evidence · 1 unique proof passage: Profile Proof E2

Fine fabric size

conditional

Use size 11 Blue Tipped needles.

  • For fine fabrics.

Source evidence · 1 unique proof passage: Profile Proof E3

Medium heavy size

conditional

Use size 14 needles.

  • For medium-to-heavy fabrics.

Source evidence · 1 unique proof passage: Profile Proof E3

Care and ownership

Cleaning hook area

conditional

With power off and the machine unplugged, remove the needle plate and bobbin holder; clean the bobbin holder and hook area with the stated brush/dry-cloth or vacuum methods, then reinstall the holder and plate in the stated alignment.

  • No cleaning interval is stated.

Source evidence · 1 unique proof passage: Profile Proof E4

Exterior cleaning

conditional

Clean the outside with a soft cloth and mild soap.

  • No cleaning interval is stated.

Source evidence · 1 unique proof passage: Profile Proof E4

Presser feet and adapters

Sources for the owner answers above
Official OEM PDF

What this passage supports

  • Insertion direction: Place the bobbin so the thread runs off counterclockwise.
  • Threading path: Guide the thread into the front notch, draw it left between the tension-spring blades and into the side notch, pull about 10 cm (4 inches) to the rear, then reattach the hook cover plate.
Place the Bobbin in the Bobbin Holder with the thread running off in the counterclockwise direction. Guide the thread into front notch on the front of the bobbin holder. Draw the thread to the left, sliding it between the tension spring blades. Continue to draw the thread lightly until the thread slips into side notch. Pull out about 10 cm (4 inches) of thread to the rear. Refer to the threading chart shown on the hook cover plate. Reattach the hook cover plate.
Document
Janome Memory Craft 350e Instruction Book
Issuer
Janome
Extraction
Visually verified transcription of a scanned page
Visual verification
Checked 2026-09-14T22:10:00Z. The page image and transcription are hash-bound in the evidence record.
PDF page
10
Open source
Open OEM landing/support page (cited PDF unavailable)
Advanced technical receipt
Asset SHA-256
1ce03ec5594c87e0359a2c1990bc4d70d20c603379d33e30d1baeaf0d767caaa
Locator
0b8f4b5cfde8a52ee8f79988640e9ab68120e5d7af6a7747135d1cb7cff8fda5
Destination status
landing_page_fallback
Official OEM PDF

What this passage supports

  • Fine fabric size: Use size 11 Blue Tipped needles.
  • Medium heavy size: Use size 14 needles.
Use the size 11 Blue Tipped Needles for fine fabrics. For medium to heavy weight fabrics, use the size 14 needles.
Document
Janome Memory Craft 350e Instruction Book
Issuer
Janome
Extraction
Visually verified transcription of a scanned page
Visual verification
Checked 2026-09-14T22:10:00Z. The page image and transcription are hash-bound in the evidence record.
PDF page
16
Open source
Open OEM landing/support page (cited PDF unavailable)
Advanced technical receipt
Asset SHA-256
1ce03ec5594c87e0359a2c1990bc4d70d20c603379d33e30d1baeaf0d767caaa
Locator
2d5517d98b057d79d70cbc3e37cd740eb2cf308fa66e30c4d6c5a08df340c3eb
Destination status
landing_page_fallback
Official OEM PDF

What this passage supports

  • Cleaning hook area: With power off and the machine unplugged, remove the needle plate and bobbin holder; clean the bobbin holder and hook area with the stated brush/dry-cloth or vacuum methods, then reinstall the holder and plate in the stated alignment.
  • Exterior cleaning: Clean the outside with a soft cloth and mild soap.
Turn the power switch off and unplug the machine before cleaning. Clean the outside of the machine with a soft cloth and mild soap. Remove the setscrews and needle plate. Lift up and remove the bobbin holder. Clean the bobbin holder with a lint brush. Clean the Auto thread cutter mechanism and hook race with the lint brush. Clean the hook race with a dry cloth; you may also use a vacuum cleaner. Insert the bobbin holder so its knob fits next to the stopper. Reattach the needle plate, align the guide pins with the guide holes, and tighten the screw.
Document
Janome Memory Craft 350e Instruction Book
Issuer
Janome
Extraction
Visually verified transcription of a scanned page
Visual verification
Checked 2026-09-14T22:10:00Z. The page image and transcription are hash-bound in the evidence record.
PDF page
49
Open source
Open OEM landing/support page (cited PDF unavailable)
Advanced technical receipt
Asset SHA-256
1ce03ec5594c87e0359a2c1990bc4d70d20c603379d33e30d1baeaf0d767caaa
Locator
a98087b99105ae7c696d6cb04f076e75bae314b695423999b286de66169598e0
Destination status
landing_page_fallback
Official OEM PDF

What this passage supports

  • Insertion orientation: Insert the needle with its flat side to the rear.
  • Insertion depth: Push the needle up as far as it will go and tighten the needle-clamp screw firmly.
Turn off the power switch. Raise the needle by turning the handwheel and lower the presser foot. Loosen the needle clamp screw by turning it counterclockwise. Remove the needle from the clamp. Insert a new needle into the needle clamp with the flat side of the needle to the rear. When inserting the needle into the needle clamp, push it up as far as it will go and tighten the needle clamp screw firmly. Never use a blunt needle.
Document
Janome Memory Craft 350e Instruction Book
Issuer
Janome
Extraction
Visually verified transcription of a scanned page
Visual verification
Checked 2026-09-14T22:10:00Z. The page image and transcription are hash-bound in the evidence record.
PDF page
16
Open source
Open OEM landing/support page (cited PDF unavailable)
Advanced technical receipt
Asset SHA-256
1ce03ec5594c87e0359a2c1990bc4d70d20c603379d33e30d1baeaf0d767caaa
Locator
b8c628a04a49f1fd102c1a0ef923002744336d6e9973cfd134f396f4560098b1
Destination status
landing_page_fallback
Machine facets and OEM groups

Cited machine facets

Identity and compatibility badges

Identity families, physical traits, and OEM accessory groups stay separate. A group badge applies only to its named program and domains.

OEM group · accessory, presser footJanome Accessory Compatibility Category: Janome Category B
Detailed specifications, compatible parts, and source library

Evidence coverage

Core answers and cited items

Machine category

embroidery only

View machine-type evidence · 1 unique proof passage: Proof E4

View proof JSONReport this claim

Core domains answered: None yet

Domains with cited compatible items: presser foot (38)

bobbinReviewed — not established
hoop frameunknown
needleReviewed — not established
presser foot38 cited items; core not established

Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.

Parts & accessories

47 documented relationships

A two-hop result joins the machine’s official accessory-group membership to the OEM part matrix. Open the evidence to inspect both hops.

47 relationships shown

presser foot · 38

BINDER FOOT WITH GUIDE
796-402-004
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E6

View proof JSONReport this claim
ADJUSTABLE ZIPPER FOOT
767-408-011
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E7

View proof JSONReport this claim
1/4 INCH RULER FOOT SET
767-440-004
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E8

View proof JSONReport this claim
BEADING FOOT
202-041-108
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E10

View proof JSONReport this claim
BEADING FOOT
200-809-106
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E11

View proof JSONReport this claim
NARROW STRAIGHT STITCH FOOT
767-406-019
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E13

View proof JSONReport this claim
EVEN FEED FOOT
767-403-016
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E14

View proof JSONReport this claim
CONCEAL® ZIPPER FOOT
767-410-016
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E15

View proof JSONReport this claim
CONVERTIBLE FREE MOTION QUILTING FOOT SET
767-433-004
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E16

View proof JSONReport this claim
CLEAR VIEW COVER STITCH FOOT
795-818-107
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E17

View proof JSONReport this claim
TAPING FOOT
767-412-018
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E19

View proof JSONReport this claim
TAPE BINDER
795-843-008
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E20

View proof JSONReport this claim
CENTER GUIDE FOOT
795-819-108
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E21

View proof JSONReport this claim
CENTER GUIDE FOOT
795-820-102
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E23

View proof JSONReport this claim
DITCH QUILTING FOOT
767-824-109
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E24

View proof JSONReport this claim
FREE MOTION FRAME QUILTING FEET SET
767-434-005
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E25

View proof JSONReport this claim
CORDING FOOT (B)
202-035-006
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E26

View proof JSONReport this claim
ULTRA GLIDE FOOT
767-404-028
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E28

View proof JSONReport this claim
1/4 INCH RULER FOOT SET
767-441-005
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E30

View proof JSONReport this claim
VELVET FOOT
767-407-102
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E31

View proof JSONReport this claim
BELT LOOP FOOT
200-808-105
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E33

View proof JSONReport this claim
TAPE BINDER AND BINDER FOOT WITH GUIDE
202-327-008
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E34

View proof JSONReport this claim
1/4 INCH SEAM FOOT
767-820-105
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E35

View proof JSONReport this claim
TAPING FOOT WITH REEL
202-033-004
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E36

View proof JSONReport this claim
CONVERTIBLE FREE MOTION QUILTING FOOT SET
767-433-129
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E37

View proof JSONReport this claim
BLIND STITCH FOOT
202-040-004
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E38

View proof JSONReport this claim
HEMMER FOOT
761-172-004
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E39

View proof JSONReport this claim
GATHERING FOOT
200-807-104
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E40

View proof JSONReport this claim
RIGHT BI-LEVEL FOOT
202-424-006
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E41

View proof JSONReport this claim
NARROW HINGED FOOT (RIGHT SIDE)
202-425-007
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E42

View proof JSONReport this claim
TAPE BINDER
795-844-009
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E44

View proof JSONReport this claim
TAPE BINDER
795-838-103
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E46

View proof JSONReport this claim
CORDING FOOT (A)
202-034-005
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E47

View proof JSONReport this claim
BLIND STITCH FOOT
200-806-103
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E48

View proof JSONReport this claim
CLEAR VIEW COVER STITCH FOOT
795-821-103
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E49

View proof JSONReport this claim
BIAS TAPE FOOT
200-810-100
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E50

View proof JSONReport this claim
TAPE BINDER
795-840-108
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E51

View proof JSONReport this claim
EMBROIDERY COUCHING FOOT SET
202-316-004
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E52

View proof JSONReport this claim

attachment · 8

ELASTIC GATHERING ATTACHMENT
202-523-006
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E9

View proof JSONReport this claim
ADJUSTABLE SEAM GUIDE
795-806-102
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E12

View proof JSONReport this claim
ELASTIC GATHERING ATTACHMENT
795-817-106
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E22

View proof JSONReport this claim
ELASTIC GATHERING ATTACHMENT
202-037-008
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E27

View proof JSONReport this claim
ADJUSTABLE SEAM GUIDE
767-411-017
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E29

View proof JSONReport this claim
GATHERING ATTACHMENT
202-036-100
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E32

View proof JSONReport this claim
COVER HEM FOOT, LACE ATTACHMENT, HEM & WRAPPED EDGE GUIDES
200-801-407
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E43

View proof JSONReport this claim
ELASTIC GATHERING ATTACHMENT
795-816-105
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E45

View proof JSONReport this claim

belt · 1

BIAS TAPE GUIDE AND BELT LOOP FOLDER
202-464-008
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in Janome Accessory Compatibility Category · Janome Category B, and the OEM matrix lists this part for that group. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E5, Step 2 E18

View proof JSONReport this claim

OEM compatibility programs

Documented group memberships

Group codes are namespaced to the issuing OEM program and apply only to the cited domains. They are not machine series and do not prove compatibility outside those domains.

Janome Category B

Janome Accessory Compatibility Category · code B

Applies to: accessory, presser foot

View machine-to-group evidence · 1 unique proof passage: Proof E5

View proof JSONReport this claim

Official source library

Documents used on this page

Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.

Janome Global Sewing Machine Accessories Catalog

accessory compatibility

Open official source destination · 1 unique proof passage: Proof E2

Janome Global Accessories Catalog

accessory catalog

Open official source destination · 1 unique proof passage: Proof E1

Evidence library

52 exact proof passages from 2 OEM documents

Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.

Open exact proof passages · 52 unique proof passages
Official OEM PDF

What this passage proves

  • Identity — printed machine name: MC350E
500E MC350E/300E MC200E B Embroidery
Document
Janome Global Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
6
Open source
Open cited PDF at page 6Open OEM source or support page
Advanced technical receipt
Asset SHA-256
896123f19932823c009a23ae608dbdddf35b675f54937023871be4fe210837b1
Locator
9b0a841c82cf6e68432b353714e2c8b9166af0a3b78d97752e94ab161b0479ca
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — model code: MC350E
  • Identity — preferred display name: MC350E
MC350E/
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
6
Open source
Open cited PDF at page 6Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
8abedb3b287a02f48575e249e7c23897c0cc893a5c4a44c9cd91caf0ca5a7584
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: MC350E
MC350E/
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
6
Open source
Open cited PDF at page 6Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
eb5f69e13f98fbc8bf72a8efa413cbe779206d5a5fc1e87309813797f55ee89c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Machine category — machine type: embroidery only
MC350E/300E 500E B Embroidery only models
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
6
Open source
Open cited PDF at page 6Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
e703d743577ea4d6569bb0ece25e42354ed551daec3384ce5464680ba94166ba
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • OEM program membership — Janome Accessory Compatibility Category: Janome Category B
  • Item fitment path — this machine's OEM group membership for BINDER FOOT WITH GUIDE
  • Item fitment path — this machine's OEM group membership for ADJUSTABLE ZIPPER FOOT
  • Item fitment path — this machine's OEM group membership for 1/4 INCH RULER FOOT SET
  • Item fitment path — this machine's OEM group membership for ELASTIC GATHERING ATTACHMENT
  • Item fitment path — this machine's OEM group membership for BEADING FOOT
  • Item fitment path — this machine's OEM group membership for ADJUSTABLE SEAM GUIDE
  • Item fitment path — this machine's OEM group membership for NARROW STRAIGHT STITCH FOOT
  • Item fitment path — this machine's OEM group membership for EVEN FEED FOOT
  • Item fitment path — this machine's OEM group membership for CONCEAL® ZIPPER FOOT
  • Item fitment path — this machine's OEM group membership for CONVERTIBLE FREE MOTION QUILTING FOOT SET
  • Item fitment path — this machine's OEM group membership for CLEAR VIEW COVER STITCH FOOT
  • Item fitment path — this machine's OEM group membership for BIAS TAPE GUIDE AND BELT LOOP FOLDER
  • Item fitment path — this machine's OEM group membership for TAPING FOOT
  • Item fitment path — this machine's OEM group membership for TAPE BINDER
  • Item fitment path — this machine's OEM group membership for CENTER GUIDE FOOT
  • Item fitment path — this machine's OEM group membership for DITCH QUILTING FOOT
  • Item fitment path — this machine's OEM group membership for FREE MOTION FRAME QUILTING FEET SET
  • Item fitment path — this machine's OEM group membership for CORDING FOOT (B)
  • Item fitment path — this machine's OEM group membership for ULTRA GLIDE FOOT
  • Item fitment path — this machine's OEM group membership for VELVET FOOT
  • Item fitment path — this machine's OEM group membership for GATHERING ATTACHMENT
  • Item fitment path — this machine's OEM group membership for BELT LOOP FOOT
  • Item fitment path — this machine's OEM group membership for TAPE BINDER AND BINDER FOOT WITH GUIDE
  • Item fitment path — this machine's OEM group membership for 1/4 INCH SEAM FOOT
  • Item fitment path — this machine's OEM group membership for TAPING FOOT WITH REEL
  • Item fitment path — this machine's OEM group membership for BLIND STITCH FOOT
  • Item fitment path — this machine's OEM group membership for HEMMER FOOT
  • Item fitment path — this machine's OEM group membership for GATHERING FOOT
  • Item fitment path — this machine's OEM group membership for RIGHT BI-LEVEL FOOT
  • Item fitment path — this machine's OEM group membership for NARROW HINGED FOOT (RIGHT SIDE)
  • Item fitment path — this machine's OEM group membership for COVER HEM FOOT, LACE ATTACHMENT, HEM & WRAPPED EDGE GUIDES
  • Item fitment path — this machine's OEM group membership for CORDING FOOT (A)
  • Item fitment path — this machine's OEM group membership for BIAS TAPE FOOT
  • Item fitment path — this machine's OEM group membership for EMBROIDERY COUCHING FOOT SET
MC350E/300E 500E B Embroidery only models
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
6
Open source
Open cited PDF at page 6Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
495a5b8fd10591db3d1f0fbf12c08a3b1c233807f6d5e1608adb0c469b66c39e
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BINDER FOOT WITH GUIDE (compatible)
796-402-004 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
46
Open source
Open cited PDF at page 46Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
67106b1013ef82e2142258cda268ad96d034bf78c97e0bf579789fa832d3be5f
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ADJUSTABLE ZIPPER FOOT (compatible)
767-408-011 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
55
Open source
Open cited PDF at page 55Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
68d5a198fecd06da920c33d790cbeb8ed1e6e6899a18de2a61fb16e70c32c952
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 1/4 INCH RULER FOOT SET (compatible)
767-440-004 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
56
Open source
Open cited PDF at page 56Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
e6e2e0d7ecd63a4da8f2d95b245496ecf78585b8e03d5a2293a7419410f5f86f
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: ELASTIC GATHERING ATTACHMENT (compatible)
202-523-006 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
40
Open source
Open cited PDF at page 40Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
9968b775f98b2e42ae8bb455bef833d0c157a436c9068c068ac8918ffdd7831e
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BEADING FOOT (compatible)
202-041-108 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
41
Open source
Open cited PDF at page 41Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
be07715df8638660ef256c307cd8fe4c3ae993a789556cf257e7b216243d76c0
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BEADING FOOT (compatible)
200-809-106 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
49
Open source
Open cited PDF at page 49Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
19b554c699dc451a34fdae7f7526676a4f08b6206eef480e0ca7d8236d7ba21f
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: ADJUSTABLE SEAM GUIDE (compatible)
795-806-102 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
44
Open source
Open cited PDF at page 44Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
b33907406aadc6c81c402ad450c2144827fcd8a94d386ae5d52073a60fe436b5
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: NARROW STRAIGHT STITCH FOOT (compatible)
767-406-019 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
52
Open source
Open cited PDF at page 52Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
15414571e9bed68b912f2408da2b3a2ffb0b0053ce09dd547539e271f2571983
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: EVEN FEED FOOT (compatible)
767-403-016 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
54
Open source
Open cited PDF at page 54Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
ec1a098222d2bb69ea59b36c4b34df682414df38847c3fa1033ab1a189e45965
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CONCEAL® ZIPPER FOOT (compatible)
767-410-016 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
56
Open source
Open cited PDF at page 56Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
b1a5f308fd4488eee01edc3768a41884f4c0ac0b77e9ea290be1ab67c6073096
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CONVERTIBLE FREE MOTION QUILTING FOOT SET (compatible)
767-433-004 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
57
Open source
Open cited PDF at page 57Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
ce0e9895e23f1607e207099d2023428b97b9b853e980b113c255559aa7c1d134
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR VIEW COVER STITCH FOOT (compatible)
795-818-107 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
43
Open source
Open cited PDF at page 43Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
cfdd7440eb2f690c02f9ce47e24384d64cb4aea2d0ebf97072e38646023bf6c9
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — belt: BIAS TAPE GUIDE AND BELT LOOP FOLDER (compatible)
202-464-008 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
47
Open source
Open cited PDF at page 47Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
10be93dc30d983ebe07190e3c709652ce4aae9c73b8d4a5dd7a7cf3e7e31197f
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: TAPING FOOT (compatible)
767-412-018 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
54
Open source
Open cited PDF at page 54Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
0c5ad93a9b7f2fc942426bbbf8130e8922712ef4d0cab9e8d0434e76a1612e86
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: TAPE BINDER (compatible)
795-843-008 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
45
Open source
Open cited PDF at page 45Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
ee51cd389eb2dc0bea1a610213d39ae70e9ffc1490494edff9a11358a7b6b3a5
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CENTER GUIDE FOOT (compatible)
795-819-108 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
44
Open source
Open cited PDF at page 44Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
0ba5696fbe8c7d15048ea69ac765db972000dcd10953015c42834be3a0829de2
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: ELASTIC GATHERING ATTACHMENT (compatible)
795-817-106 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
44
Open source
Open cited PDF at page 44Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
806e289c1727fb7166fbb9d44ddef5aac13a5ec95c1829373384533323765d84
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CENTER GUIDE FOOT (compatible)
795-820-102 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
44
Open source
Open cited PDF at page 44Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
6ffac71a9415ec992873198218ffaf58181e56531a8dd0e760643a98a6dedf75
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: DITCH QUILTING FOOT (compatible)
767-824-109 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
53
Open source
Open cited PDF at page 53Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
ac50b90d16b8be86f97de5c50e3bc41d5d67e636b54e5b98e2171e1e0c5d1bb5
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: FREE MOTION FRAME QUILTING FEET SET (compatible)
767-434-005 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
57
Open source
Open cited PDF at page 57Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
f3780c54271bd961c45d382aeb38c9aa0957f4d25d1ee3b9339e4aa1c5558d06
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CORDING FOOT (B) (compatible)
202-035-006 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
39
Open source
Open cited PDF at page 39Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
fde8b52819da50f02c8e7d570ea3cc402a69726a6eb9583bca5a3313d881c2a2
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: ELASTIC GATHERING ATTACHMENT (compatible)
202-037-008 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
40
Open source
Open cited PDF at page 40Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
91e19291683f846aa1a9653f77164df35ba4c46be7b8b885e1733afb771f7a24
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ULTRA GLIDE FOOT (compatible)
767-404-028 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
51
Open source
Open cited PDF at page 51Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
8dbdd9ecbbb6decccf860c3acd8890f38d7a8aecfb0c5ccc3887e81367e05e1c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: ADJUSTABLE SEAM GUIDE (compatible)
767-411-017 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
56
Open source
Open cited PDF at page 56Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
73f35b631ccadd67006101f0c4caadccfeda5aceedbdaba1e9a33205566e26ba
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 1/4 INCH RULER FOOT SET (compatible)
767-441-005 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
56
Open source
Open cited PDF at page 56Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
a6b1db47ed791b0f2fe48848a67bd3c541db5c9e82cb8d410296ee328e33758e
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: VELVET FOOT (compatible)
767-407-102 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
52
Open source
Open cited PDF at page 52Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
a5dfa5ac491c560bc4289f9969b52fd426544c46897c8c2cab213f2eb3f23d14
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: GATHERING ATTACHMENT (compatible)
202-036-100 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
42
Open source
Open cited PDF at page 42Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
e1046c4a1d1a8a7886f8fc116c477e495aed3a4f0ed397f0e89eb53355589abc
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BELT LOOP FOOT (compatible)
200-808-105 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
49
Open source
Open cited PDF at page 49Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
0889acf818dcf69b6fae5a9a53cff4c2ac898e01674ad44bccc812166a64a765
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: TAPE BINDER AND BINDER FOOT WITH GUIDE (compatible)
202-327-008 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
46
Open source
Open cited PDF at page 46Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
92d83dbf69dcd0463adde35f19344df52793b61459029cf775b8a27ddabd87b1
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 1/4 INCH SEAM FOOT (compatible)
767-820-105 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
53
Open source
Open cited PDF at page 53Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
2cfe7f13400ba2eb0a4da217d514c3b77f31c902f9365dc7dc8a1a0b806853ba
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: TAPING FOOT WITH REEL (compatible)
202-033-004 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
40
Open source
Open cited PDF at page 40Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
53063c80b39bc223fa05a9245ee965d0881985ea53bb4a227d27c04caa3a8993
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CONVERTIBLE FREE MOTION QUILTING FOOT SET (compatible)
767-433-129 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
57
Open source
Open cited PDF at page 57Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
d6dfa8f384caf5b37d82c0e92fc78011d02dc90b3737019ef6324d0e2efe5e86
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BLIND STITCH FOOT (compatible)
202-040-004 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
40
Open source
Open cited PDF at page 40Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
dc49f79eca5cfa65ee96b6ff2747b8ef1ec2f913b21c7448e2d5ffabc105d4c0
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: HEMMER FOOT (compatible)
761-172-004 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
53
Open source
Open cited PDF at page 53Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
ff5f522c9f0eb6f4d6d4017aaf8e0de8f810675296eec79d5254c8815b4fe634
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: GATHERING FOOT (compatible)
200-807-104 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
48
Open source
Open cited PDF at page 48Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
b106e287242224dbfb88d984130464e8a0ac05e0405b315f20b1bfcb58cf636c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: RIGHT BI-LEVEL FOOT (compatible)
202-424-006 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
55
Open source
Open cited PDF at page 55Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
97cc77e757c2f65f7bab9f26c096772c506510cb0ff15decbd69365d5d0a58c7
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: NARROW HINGED FOOT (RIGHT SIDE) (compatible)
202-425-007 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
55
Open source
Open cited PDF at page 55Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
0a379d6e305434bf5c315fb2e65d764d81c41955edec5126328bf91d604928a1
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: COVER HEM FOOT, LACE ATTACHMENT, HEM & WRAPPED EDGE GUIDES (compatible)
200-801-407 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
50
Open source
Open cited PDF at page 50Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
7ab5a03039ab9e027836e2e4e314c5718fcb02de30f906b746f02a784a09d4f5
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: TAPE BINDER (compatible)
795-844-009 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
45
Open source
Open cited PDF at page 45Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
bfc6dcc48e5fe2635440e8c0bceb1a0f2725ea8fb1ab7245d861271fbbb2b18b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: ELASTIC GATHERING ATTACHMENT (compatible)
795-816-105 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
44
Open source
Open cited PDF at page 44Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
bc6d087e32901137bf970e280f54f28fc513a883bd511e95b85d65339ffceca0
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: TAPE BINDER (compatible)
795-838-103 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
45
Open source
Open cited PDF at page 45Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
ce48bacdc6a866f66ad4df74b39275ff36c5b6102b7c6e9040d0a4c7289e0091
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CORDING FOOT (A) (compatible)
202-034-005 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
39
Open source
Open cited PDF at page 39Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
ca1645eac6de16d882804fedde6ebd8c9eaa67370130a793267873b785adf8a7
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BLIND STITCH FOOT (compatible)
200-806-103 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
48
Open source
Open cited PDF at page 48Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
1a0605137a701ef0b2f2df210a633b2c01813d62517e056f8e864b7d0dae56d2
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR VIEW COVER STITCH FOOT (compatible)
795-821-103 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
43
Open source
Open cited PDF at page 43Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
6bf3198edd96e3a86b9c1f4a20f212efd630ee05296f78cf7d831832ce288378
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BIAS TAPE FOOT (compatible)
200-810-100 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
49
Open source
Open cited PDF at page 49Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
885d92d3b98a78637978e3e8b404856249b778494d3ac4b13f535bea1b7f72f6
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: TAPE BINDER (compatible)
795-840-108 A B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
45
Open source
Open cited PDF at page 45Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
e000c7047a593171b75ebb6dca6128f0c7e475b2a6b54ebdb638988f6e79e9e4
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: EMBROIDERY COUCHING FOOT SET (compatible)
202-316-004 B
Document
Janome Global Sewing Machine Accessories Catalog
Issuer
Janome
Extraction
native
PDF page
66
Open source
Open cited PDF at page 66Open OEM source or support page
Advanced technical receipt
Asset SHA-256
9580c0b4e4a53a2f13d71036bac9e214c316107ec4b06bf6fabe21982b17687e
Locator
2c96195a314fc96dd2e8d6f1fea0311c4991cffbfd994d6cefb4a070e4801f07
Destination status
direct_pdf

What is supported, and what remains open?

0 supported answers and 8 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.

Unresolved owner questions (3)
  • Class system: Not established — Not yet verified: The insertion procedure does not establish bobbin class, dimensions, material, part number, case identity, or substitution.
  • System type: Not established — Not yet verified: The exact pages do not establish a standardized needle-system designation or cross-brand substitution.
  • Mount or fit: Not established — Not yet verified: The packet does not establish a standardized presser-foot mount, shank, adapter, or compatible-item fit.

Report a correction or share an OEM source

Advanced provenance and dataset receipt

Public snapshot a1cc1aceef228fcf33329e37165ab888ce5b9fe3f13eb56967ae0fbf41d8d8a7

Catalog e156281c7d3048027b5ac89e7476be8f54dd5a9309505e96260b0455d3cd2a7e · exact native quotes only · dossier method sewgraph-model-dossier-v2