Which material applications does JUKI state?
supported
General fabrics and light-weight materials.
Source evidence · 1 unique proof passage: Profile Proof E1
juki · verified physical machine
DDL-8700A
verified exact machine · 1/3 core systems
Identity verified · evidence for each answer
Using and maintaining this machine
Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.
Features and specifications
What maximum sewing speed is stated?
supported
Maximum 4,000 stitches per minute.
Source evidence · 1 unique proof passage: Profile Proof E1
What maximum stitch length is stated?
supported
Maximum 4 mm.
Source evidence · 1 unique proof passage: Profile Proof E1
Needles and threading
Which needle system applies?
conditional
DA x 1.
- This value applies only to the exact named model and is not transferred to another DDL-8700 suffix variant.
Source evidence · 1 unique proof passage: Profile Proof E1
Which needle-size range is stated?
conditional
#9 to #11, with alternate notation 134 #65 to #75.
- Preserve the source-local primary and alternate notation exactly; no other sizes or substitutions are established.
Source evidence · 1 unique proof passage: Profile Proof E1
Presser feet and adapters
What presser-foot rise is stated for the knee lifter?
conditional
9 mm maximum by knee lifter.
- This is the knee-lifter rise measurement only; it does not establish shank class, holder geometry, attachment mechanism, adapter fit or compatible presser-foot items.
Source evidence · 1 unique proof passage: Profile Proof E1
Care and ownership
How should the oil level be maintained?
conditional
Turn off the power and ascertain that the motor is at rest before starting this work. Then fill the oil pan to the HIGH mark; when the level falls below LOW, refill it with the specified oil.
- Use the oil specified by JUKI for the machine; do not infer a substitute from this procedure.
Source evidence · 1 unique proof passage: Profile Proof E2
Sources for the owner answers above
Official OEM PDF
What this passage supports
- Which material applications does JUKI state?: General fabrics and light-weight materials.
- What maximum sewing speed is stated?: Maximum 4,000 stitches per minute.
- What maximum stitch length is stated?: Maximum 4 mm.
- Which needle system applies?: DA x 1.
- Which needle-size range is stated?: #9 to #11, with alternate notation 134 #65 to #75.
- What presser-foot rise is stated for the knee lifter?: 9 mm maximum by knee lifter.
DDL-8700A General fabris, light-weight materials Max. 4,000 sti/min Max. 4 mm DA x 1 #9 to #11 (134 #65 to #75) 9 mm (Max.)
- Document
- DDL-8700 instruction manual
- Issuer
- JUKI
- Extraction
- Native document text
- PDF page
- 3
- Open source
Advanced technical receipt
- Asset SHA-256
- 8e6af0093874844380660e470736bf0d938f56b56519f799d77d59d0f056f03e
- Locator
- 49112902d28d6db8c554d90f29ce565c95714817f2bd60567d0c5f3156513f3e
- Destination status
- direct_pdf
Official OEM PDF
What this passage supports
- How should the oil level be maintained?: Turn off the power and ascertain that the motor is at rest before starting this work. Then fill the oil pan to the HIGH mark; when the level falls below LOW, refill it with the specified oil.
To protect against possible personal injury due to abrupt start of the machine, be sure to start the following work after turning the power off and ascertaining that the motor is at rest. Fill oil pan 1 with JUKI New Defrix Oil No. 1 up to HIGH mark A. When the oil level lowers below LOW mark B, refill the oil pan with the specified oil.
- Document
- DDL-8700 instruction manual
- Issuer
- JUKI
- Extraction
- Native document text
- PDF page
- 5
- Open source
Advanced technical receipt
- Asset SHA-256
- 8e6af0093874844380660e470736bf0d938f56b56519f799d77d59d0f056f03e
- Locator
- dae0f81b65c4c9f3994ba1af3d835b2f653d86f8ed7439e7ec843208c12ed19e
- Destination status
- direct_pdf
Machine facets and OEM groups
Cited machine facets
Identity and compatibility badges
Identity families, physical traits, and OEM accessory groups stay separate. A group badge applies only to its named program and domains.
hook typefull rotary auto lubricatingneedle systemDAx1
Detailed specifications, compatible parts, and source library
Evidence coverage
Core answers and cited items
Machine category: Not yet established
Core domains answered: needle
Domains with cited compatible items: None yet
Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.
Specifications
Documented machine facts
Multiple cited representations for one field share one row. SewGraph preserves every value and exact proof passage; it does not guess which representation is “raw” or “normalized” when the public projection does not label that distinction.
Official source library
Documents used on this page
Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.
DDL-8700 parts list
parts
Open official source destination · 1 unique proof passage: Proof E3
DDL-8700 instruction manual
instruction
Open official source destination · 1 unique proof passage: Proof E1
DDL-8700 specifications brochure
brochure
Open official source destination · 1 unique proof passage: Proof E4
Evidence library
5 exact proof passages from 3 OEM documents
Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.
Open exact proof passages · 5 unique proof passages
Official OEM PDF
What this passage proves
- Identity — model code: DDL-8700A
- Identity — preferred display name: DDL-8700A
DDL-8700A
- Document
- DDL-8700 instruction manual
- Issuer
- JUKI
- Extraction
- native
- PDF page
- 3
- Open source
Advanced technical receipt
- Asset SHA-256
- 8e6af0093874844380660e470736bf0d938f56b56519f799d77d59d0f056f03e
- Locator
- 0e7fc5451da79f27a468077b4be0b31b4c8bad5aa39b07bf9c3ea50766be34dd
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Identity — printed machine name: DDL-8700A
DDL-8700A DDL-8700H Application General fabrics, light-weight General fabris, light-weight Medium-weight materials, and medium-weight materials materials heavy-weight materials Sewing
- Document
- DDL-8700 instruction manual
- Issuer
- JUKI
- Extraction
- native
- PDF page
- 3
- Open source
Advanced technical receipt
- Asset SHA-256
- 8e6af0093874844380660e470736bf0d938f56b56519f799d77d59d0f056f03e
- Locator
- 870a5d1a77dc4ed2d7b78ef9396a17c3881fc6f8d7c28edac86150513d6af313
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Identity — printed machine name: DDL-8700A
11. EXCLUSIVE PARTS FOR DDL-8700A
- Document
- DDL-8700 parts list
- Issuer
- JUKI
- Extraction
- native
- PDF page
- 21
- Open source
Advanced technical receipt
- Asset SHA-256
- c80fad2c363c9e81b5b965524600641deb55401409a063589746fb9016e1d46b
- Locator
- fe054d7508ef6f469fe44d88380dfb6567c110ae9912f8f0158c6030a0746f78
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- bobbin fact — hook type: full_rotary_auto_lubricating
機種名 DDL-8700 DDL-8700-7 DDL-8700A DDL-8700A-7 DDL-8700H DDL-8700H-7DDL-8700-7/SC-920C/M921本針本縫自動糸切りミシン 用途区分 中厚物 薄物 厚物 最高縫い速度 5,500sti/min＊ 5,000sti/min＊ 4,000sti/min＊ 最大縫い目長さ 5mm 4mm 4mm 5mm 針棒ストローク 30.7mm 35mmDDL-87001本針本縫ミシン 押え上昇量 手動5.5mm/膝上げ13mm 手動4mm/膝上げ9mm 手動5.5mm/膝上げ13mm 使用針（出荷時装着番手） DB×1（#14）#9～#18 DA×1（#9）#9～#11 DB×1（#21）#19～#23 送り歯 4枚歯 3枚歯 4枚歯 3枚歯 4枚歯 使用釜 全回転自動給油釜
- Document
- DDL-8700 specifications brochure
- Issuer
- JUKI
- Extraction
- native
- PDF page
- 1
- Open source
Advanced technical receipt
- Asset SHA-256
- 7a874c85ad275d6c06ee3871fca523ff2b4a47c05da71f114c0161972914038d
- Locator
- a79aa60bd45416eb800798610f6f1c79f4fae9a5f2ca75a602c6cc0472170362
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- needle fact — needle system: DAx1
- Needle answer — DAx1
DA x 1 #9 to #11 (134 #65 to #75)
- Document
- DDL-8700 instruction manual
- Issuer
- JUKI
- Extraction
- native
- PDF page
- 3
- Open source
Advanced technical receipt
- Asset SHA-256
- 8e6af0093874844380660e470736bf0d938f56b56519f799d77d59d0f056f03e
- Locator
- 7488c8947f4e103036baa3db469d5036a849f78d94e74276868370c58d11d6bc
- Destination status
- direct_pdf
What is supported, and what remains open?
3 supported answers and 4 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.
Unresolved owner questions (3)
- Standardized shank class: Not established — Not yet verified: The reviewed pages do not name a standardized low-, high- or slant-shank class.
- Compatible items: Not established — Not yet verified: The reviewed pages do not establish any exact compatible presser-foot item or part number.
- Bobbin class material dimensions: Not established — Not yet verified: The manual's bobbin-case handling procedure does not establish bobbin class, dimensions, material, part number or interchangeability.
Advanced provenance and dataset receipt
Public snapshot a1cc1aceef228fcf33329e37165ab888ce5b9fe3f13eb56967ae0fbf41d8d8a7
Catalog e156281c7d3048027b5ac89e7476be8f54dd5a9309505e96260b0455d3cd2a7e · exact native quotes only · dossier method sewgraph-model-dossier-v2