SewGraph

pfaff · verified physical machine

creative 4.0

View cited identity evidence · 3 unique proof passages

Jump to: Proof E1, Proof E2, Proof E3

verified exact machine · 1/3 core systems

Identity verified · evidence for each answer

Using and maintaining this machine

Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.

Presser feet and adapters

How do ordinary presser feet attach?

conditional

Native snap-on feet. Ordinary presser feet attach by aligning the foot pins with the gap under the holder until the foot snaps into place.

  • This proves only the exact foot-to-holder attachment described in this manual; it does not establish a standardized shank or generic screw-on compatibility.

Source evidence · 1 unique proof passage: Profile Proof E1

Bobbins and hook

How is a bobbin wound?

conditional

Wind an empty bobbin through the manual’s stated guide and tension path.

  • Use only original PFAFF bobbins approved for this model; this is not a normalized bobbin class.

Source evidence · 1 unique proof passage: Profile Proof E2

How is the bobbin inserted?

conditional

Insert the bobbin with its logo facing up and thread unreeling from the left so it rotates counterclockwise when thread is pulled.

  • Follow the exact tension-spring, guide and cutter path stated in the manual.

Source evidence · 1 unique proof passage: Profile Proof E3

Needles and threading

Which needle system applies?

conditional

PFAFF recommends needle system 130/705H.

  • This preserves the OEM statement as a recommendation and does not establish that it is the only acceptable system.

Source evidence · 1 unique proof passage: Profile Proof E4

Which way does the needle face?

conditional

Insert the needle fully with its flat side facing away from the operator.

  • Follow the manual’s exact insertion and tightening procedure.

Source evidence · 1 unique proof passage: Profile Proof E5

When should the needle be replaced?

conditional

Change the needle often and use a straight needle with a sharp point.

  • Replace damaged, bent or blunt needles as described by the manual.

Source evidence · 1 unique proof passage: Profile Proof E4

Features and specifications

Does it have a free arm?

supported

A free arm is available after removing the accessory tray.

Source evidence · 1 unique proof passage: Profile Proof E6

Can the feed dogs be lowered?

conditional

Feed-dog position is controlled by the machine as described in the exact manual.

  • Follow the manual’s presser-foot and re-engagement instructions.

Source evidence · 1 unique proof passage: Profile Proof E7

What sewing controls are available?

conditional

The machine can start or stop sewing without the foot control.

  • This describes only the exact controls and modes stated in the manual.

Source evidence · 1 unique proof passage: Profile Proof E8

Care and ownership

Does it require owner oiling?

conditional

No owner lubrication (oiling) is needed.

  • Keep the machine clean using the manual’s maintenance procedure.

Source evidence · 1 unique proof passage: Profile Proof E9

How should it be cleaned?

conditional

Clean the feed dogs and bobbin area with the supplied brush.

  • Turn off the machine and follow the exact removal steps; do not blow air into the bobbin-case area.

Source evidence · 1 unique proof passage: Profile Proof E9

Sources for the owner answers above
Official OEM PDF

What this passage supports

  • How do ordinary presser feet attach?: Ordinary presser feet attach by aligning the foot pins with the gap under the holder until the foot snaps into place.
Line up the pins on the foot with the gap foot snaps into place
Document
PFAFF 413299726A_creative_4_0_manual_EN.pdf (SVP manuals feed)
Issuer
PFAFF
Extraction
Native document text
PDF page
29
Open source
Open cited PDF at page 29Open OEM source or support page
Advanced technical receipt
Asset SHA-256
67ab327835a35122202d53a1be136fe47ed883a9c628fa27f08b66f98c0ae8e7
Locator
39a4e1240ca33f9222ca706166fbc9b46b299e31daf2c867f60d5e1be00890ed
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • How is a bobbin wound?: Wind an empty bobbin through the manual’s stated guide and tension path.
Bobbin winding logo facing up original PFAFF® bobbins approved for this model
Document
PFAFF 413299726A_creative_4_0_manual_EN.pdf (SVP manuals feed)
Issuer
PFAFF
Extraction
Native document text
PDF page
25
Open source
Open cited PDF at page 25Open OEM source or support page
Advanced technical receipt
Asset SHA-256
67ab327835a35122202d53a1be136fe47ed883a9c628fa27f08b66f98c0ae8e7
Locator
857e20bb28ba5618e93b4caaaf051dbd267afc64641cffe9deb4ec2848c03061
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • What sewing controls are available?: The machine can start or stop sewing without the foot control.
start or stop the machine without using the foot control
Document
PFAFF 413299726A_creative_4_0_manual_EN.pdf (SVP manuals feed)
Issuer
PFAFF
Extraction
Native document text
PDF page
33
Open source
Open cited PDF at page 33Open OEM source or support page
Advanced technical receipt
Asset SHA-256
67ab327835a35122202d53a1be136fe47ed883a9c628fa27f08b66f98c0ae8e7
Locator
9b9697943ebb8afa6c91933bc5e2fb087d13a1028e07c0efc52324abe474081b
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Does it require owner oiling?: No owner lubrication (oiling) is needed.
  • How should it be cleaned?: Clean the feed dogs and bobbin area with the supplied brush.
No lubrication (oiling) is needed Cleaning the bobbin area Do not blow air into the bobbin case area
Document
PFAFF 413299726A_creative_4_0_manual_EN.pdf (SVP manuals feed)
Issuer
PFAFF
Extraction
Native document text
PDF page
120
Open source
Open cited PDF at page 120Open OEM source or support page
Advanced technical receipt
Asset SHA-256
67ab327835a35122202d53a1be136fe47ed883a9c628fa27f08b66f98c0ae8e7
Locator
d6a11c3b648d69fa98d5fb43a31d8d7aee88f9f864f791468b597f526ddd62db
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Can the feed dogs be lowered?: Feed-dog position is controlled by the machine as described in the exact manual.
feed dogs
Document
PFAFF 413299726A_creative_4_0_manual_EN.pdf (SVP manuals feed)
Issuer
PFAFF
Extraction
Native document text
PDF page
29
Open source
Open cited PDF at page 29Open OEM source or support page
Advanced technical receipt
Asset SHA-256
67ab327835a35122202d53a1be136fe47ed883a9c628fa27f08b66f98c0ae8e7
Locator
db1ef2f8ccd6e28d0ea00cf752188ad5d6990f48614e973fdd79d5a3b629467e
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • How is the bobbin inserted?: Insert the bobbin with its logo facing up and thread unreeling from the left so it rotates counterclockwise when thread is pulled.
Inserting the bobbin thread unreeling from the left rotate counter-clockwise
Document
PFAFF 413299726A_creative_4_0_manual_EN.pdf (SVP manuals feed)
Issuer
PFAFF
Extraction
Native document text
PDF page
26
Open source
Open cited PDF at page 26Open OEM source or support page
Advanced technical receipt
Asset SHA-256
67ab327835a35122202d53a1be136fe47ed883a9c628fa27f08b66f98c0ae8e7
Locator
df5d7dfb05117b8ffdd098079edcd47e718a065900f922ef3941c26d800bb886
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Does it have a free arm?: A free arm is available after removing the accessory tray.
To use the free arm, slide off the accessory tray
Document
PFAFF 413299726A_creative_4_0_manual_EN.pdf (SVP manuals feed)
Issuer
PFAFF
Extraction
Native document text
PDF page
21
Open source
Open cited PDF at page 21Open OEM source or support page
Advanced technical receipt
Asset SHA-256
67ab327835a35122202d53a1be136fe47ed883a9c628fa27f08b66f98c0ae8e7
Locator
dff93646313d242a7226f738ad04dbba5f02c485adbc88dd5d2f51f8c61b51e9
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Which way does the needle face?: Insert the needle fully with its flat side facing away from the operator.
fl at side away from you until it will go no further
Document
PFAFF 413299726A_creative_4_0_manual_EN.pdf (SVP manuals feed)
Issuer
PFAFF
Extraction
Native document text
PDF page
27
Open source
Open cited PDF at page 27Open OEM source or support page
Advanced technical receipt
Asset SHA-256
67ab327835a35122202d53a1be136fe47ed883a9c628fa27f08b66f98c0ae8e7
Locator
f7984baf755ab1a31fb214ea8ed80f003421d734bdd98119b9c16d6013f4535c
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Which needle system applies?: PFAFF recommends needle system 130/705H.
  • When should the needle be replaced?: Change the needle often and use a straight needle with a sharp point.
We recommend needles of system 130/705H Change the needle often straight needle with a sharp point
Document
PFAFF 413299726A_creative_4_0_manual_EN.pdf (SVP manuals feed)
Issuer
PFAFF
Extraction
Native document text
PDF page
28
Open source
Open cited PDF at page 28Open OEM source or support page
Advanced technical receipt
Asset SHA-256
67ab327835a35122202d53a1be136fe47ed883a9c628fa27f08b66f98c0ae8e7
Locator
fb07289afabe4cee1dae1cfd500acf0dcfd696a7a5e723e47ebac667b29955db
Destination status
direct_pdf
Machine facets and OEM groups

Cited machine facets

Identity and compatibility badges

Identity families, physical traits, and OEM accessory groups stay separate. A group badge applies only to its named program and domains.

maximum stitch width mm9integrated dual feed systemidtneedle system130 · 705HOEM group · accessory, presser footPFAFF Accessory Group: PFAFF Group J
Detailed specifications, compatible parts, and source library

Evidence coverage

Core answers and cited items

Machine category: Not yet established

Core domains answered: needle

Domains with cited compatible items: presser foot (38)

Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.

Specifications

Documented machine facts

Multiple cited representations for one field share one row. SewGraph preserves every value and exact proof passage; it does not guess which representation is “raw” or “normalized” when the public projection does not label that distinction.

presser foot

maximum stitch width mm9

View exact evidence · 1 unique proof passage: Proof E4

integrated dual feed systemidt

View exact evidence · 1 unique proof passage: Proof E4

needle

needle system130/705H

View exact evidence · 1 unique proof passage: Proof E5

Parts & accessories

39 documented relationships

A two-hop result joins the machine’s official accessory-group membership to the OEM part matrix. Open the evidence to inspect both hops.

39 relationships shown

presser foot · 38

OPEN TOE FREE-MOTION FOOT
821140096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E7

View proof JSONReport this claim
NARROW EDGE FOOT FOR IDT™ SYSTEM
821142096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E8

View proof JSONReport this claim
1/4 INCH RIGHT GUIDE FOOT FOR IDT™ SYSTEM
820924096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E9

View proof JSONReport this claim
PIPING FOOT
820532096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E10

View proof JSONReport this claim
NARROW PIPING FOOT
820918096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E11

View proof JSONReport this claim
PERFECT ¼” FOOT WITH GUIDE FOR IDT™ SYSTEM
821063096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E12

View proof JSONReport this claim
PINTUCK FOOT, 5-GROOVE
820226096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E13

View proof JSONReport this claim
JOIN AND FOLD EDGING FOOT FOR IDT™ SYSTEM
820931096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E14

View proof JSONReport this claim
GATHERING FOOT
820668096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E15

View proof JSONReport this claim
BUTTONHOLE FOOT
820672096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E16

View proof JSONReport this claim
ROLLED HEM FOOT
820220096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E17

View proof JSONReport this claim
INVISIBLE ZIPPER FOOT
820474096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E18

View proof JSONReport this claim
BUTTONHOLE FOOT
413170301
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E19

View proof JSONReport this claim
OPEN-TOE APPLIQUÉ FOOT FOR IDT™ SYSTEM
820213096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E20

View proof JSONReport this claim
RUFFLER
820885096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E21

View proof JSONReport this claim
ROLLER FOOT
820663096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E22

View proof JSONReport this claim
SEWING STAR FOOT FOR IDT™ SYSTEM
820654096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E23

View proof JSONReport this claim
FANCY STITCH FOOT FOR IDT™ SYSTEM
820774096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E24

View proof JSONReport this claim
BIAS BINDER
820245096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E25

View proof JSONReport this claim
CLEAR 1/4 INCH RIGHT GUIDE FOOT FOR IDT™ SYSTEM
820881096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E26

View proof JSONReport this claim
NON-STICK FOOT FOR IDT™ SYSTEM
820664096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E27

View proof JSONReport this claim
RIGHT EDGE BI-LEVEL FOOT FOR IDT™ SYSTEM
821007096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E28

View proof JSONReport this claim
BLINDHEM FOOT FOR IDT™ SYSTEM
820256096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E29

View proof JSONReport this claim
OPEN-TOE FREE-MOTION SPRING FOOT
821141096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E30

View proof JSONReport this claim
CHENILLE FOOT FOR IDT™ SYSTEM
820615096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E31

View proof JSONReport this claim
BI-LEVEL TOPSTITCH FOOT FOR IDT™ SYSTEM
820676096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E32

View proof JSONReport this claim
BEADING FOOT, 4 MM & 6 MM
820604096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E33

View proof JSONReport this claim
SEW-ON BUTTON FOOT
820473096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E34

View proof JSONReport this claim
SEAM GUIDE FOOT FOR IDT™ SYSTEM
820772096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E35

View proof JSONReport this claim
ELASTIC FOOT FOR IDT™ SYSTEM
820545096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E36

View proof JSONReport this claim
STITCH-IN-DITCH FOOT FOR IDT™ SYSTEM
820925096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E37

View proof JSONReport this claim
ADJUSTABLE GUIDE FOOT FOR IDT™ SYSTEM
820677096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E39

View proof JSONReport this claim
CLEAR 1/4 INCH QUILTING FOOT FOR IDT™ SYSTEM
820883096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E40

View proof JSONReport this claim
CLEAR STITCH-IN-DITCH FOOT FOR IDT™ SYSTEM
821143096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E41

View proof JSONReport this claim
1/4 INCH QUILTING FOOT FOR IDT™ SYSTEM
820926096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E42

View proof JSONReport this claim
CLEAR OPEN TOE FOOT FOR IDT™ SYSTEM
820916096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E43

View proof JSONReport this claim
THREE HOLE YARN FOOT FOR IDT™ SYSTEM
820920096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E44

View proof JSONReport this claim
APPLIQUÉ FOOT
820214096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E45

View proof JSONReport this claim

attachment · 1

MAGNETIC SEAM GUIDE
821162096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group J, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E6, Step 2 E38

View proof JSONReport this claim

OEM compatibility programs

Documented group memberships

Group codes are namespaced to the issuing OEM program and apply only to the cited domains. They are not machine series and do not prove compatibility outside those domains.

PFAFF Group J

PFAFF Accessory Group · code J

Applies to: accessory, presser foot

View machine-to-group evidence · 1 unique proof passage: Proof E6

View proof JSONReport this claim

Official source library

Documents used on this page

Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.

PFAFF 413299726A_creative_4_0_manual_EN.pdf (SVP manuals feed)

instruction manual

Open official source destination · 1 unique proof passage: Proof E3

PFAFF Accessory Catalogue 2022

accessory compatibility

Open official source destination · 1 unique proof passage: Proof E1

Evidence library

45 exact proof passages from 2 OEM documents

Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.

Open exact proof passages · 45 unique proof passages
Official OEM PDF

What this passage proves

  • Identity — preferred display name: creative 4.0
  • Identity — model code: creative 4.0
creative™ 4.5, 4.0
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
6
Open source
Open cited PDF at page 6Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
8dc1cb1c852338bcc2424c5c0366ec03d2d2afd2efa21e31d6ba299b671456f1
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: creative 4.0
creative™ 4.5, 4.0
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
6
Open source
Open cited PDF at page 6Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
5d816d3ca7e4943ba4bb25f0cafa9b85ead73911b6885eea55eea0547da2db97
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: creative 4.0
Your PFAFF® creative™ 4.0 sewing and embroidery machine
Document
PFAFF 413299726A_creative_4_0_manual_EN.pdf (SVP manuals feed)
Issuer
PFAFF
Extraction
native
PDF page
3
Open source
Open cited PDF at page 3Open OEM source or support page
Advanced technical receipt
Asset SHA-256
67ab327835a35122202d53a1be136fe47ed883a9c628fa27f08b66f98c0ae8e7
Locator
6dd044c06b0683418d9c2228cce95ff82602cb86725d5d46e1ce9851e64ceb88
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • presser foot fact — maximum stitch width mm: 9
  • presser foot fact — integrated dual feed system: idt
Machines with 9 mm stitch width, and IDT™ system J creative sensation™ pro II creative sensation™ pro creative sensation™ creative vision™ creative performance™ creative™ 4.5, 4.0
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
6
Open source
Open cited PDF at page 6Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
19e9692596917a0b043c29370d0fe1c4b94e222270cb609e21b314bd419d1028
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • needle fact — needle system: 130/705H
  • Needle answer — 130/705H
Did you insert a wrong needle? Use needle system 130/705 H.
Document
PFAFF 413299726A_creative_4_0_manual_EN.pdf (SVP manuals feed)
Issuer
PFAFF
Extraction
native
PDF page
121
Open source
Open cited PDF at page 121Open OEM source or support page
Advanced technical receipt
Asset SHA-256
67ab327835a35122202d53a1be136fe47ed883a9c628fa27f08b66f98c0ae8e7
Locator
8344cb12dae05107ac5988b2b9be687354ad38bf5139f46d38c878793a4c71b5
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • OEM program membership — PFAFF Accessory Group: PFAFF Group J
  • Item fitment path — this machine's OEM group membership for OPEN TOE FREE-MOTION FOOT
  • Item fitment path — this machine's OEM group membership for NARROW EDGE FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for 1/4 INCH RIGHT GUIDE FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for PIPING FOOT
  • Item fitment path — this machine's OEM group membership for NARROW PIPING FOOT
  • Item fitment path — this machine's OEM group membership for PERFECT ¼” FOOT WITH GUIDE FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for PINTUCK FOOT, 5-GROOVE
  • Item fitment path — this machine's OEM group membership for JOIN AND FOLD EDGING FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for GATHERING FOOT
  • Item fitment path — this machine's OEM group membership for BUTTONHOLE FOOT
  • Item fitment path — this machine's OEM group membership for ROLLED HEM FOOT
  • Item fitment path — this machine's OEM group membership for INVISIBLE ZIPPER FOOT
  • Item fitment path — this machine's OEM group membership for OPEN-TOE APPLIQUÉ FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for RUFFLER
  • Item fitment path — this machine's OEM group membership for ROLLER FOOT
  • Item fitment path — this machine's OEM group membership for SEWING STAR FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for FANCY STITCH FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for BIAS BINDER
  • Item fitment path — this machine's OEM group membership for CLEAR 1/4 INCH RIGHT GUIDE FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for NON-STICK FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for RIGHT EDGE BI-LEVEL FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for BLINDHEM FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for OPEN-TOE FREE-MOTION SPRING FOOT
  • Item fitment path — this machine's OEM group membership for CHENILLE FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for BI-LEVEL TOPSTITCH FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for BEADING FOOT, 4 MM & 6 MM
  • Item fitment path — this machine's OEM group membership for SEW-ON BUTTON FOOT
  • Item fitment path — this machine's OEM group membership for SEAM GUIDE FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for ELASTIC FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for STITCH-IN-DITCH FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for MAGNETIC SEAM GUIDE
  • Item fitment path — this machine's OEM group membership for ADJUSTABLE GUIDE FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for CLEAR 1/4 INCH QUILTING FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for CLEAR STITCH-IN-DITCH FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for 1/4 INCH QUILTING FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for CLEAR OPEN TOE FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for THREE HOLE YARN FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for APPLIQUÉ FOOT
Machines with 9 mm stitch width, and IDT™ system J creative sensation™ pro II creative sensation™ pro creative sensation™ creative vision™ creative performance™ creative™ 4.5, 4.0
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
6
Open source
Open cited PDF at page 6Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
7fc6a1b68ccf667f1528fdf88bbaf79fc7941b1cb13f9d96e381c1474cd7e159
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: OPEN TOE FREE-MOTION FOOT (compatible)
821140096 free-motion position. J L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
54
Open source
Open cited PDF at page 54Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
a603ea4513f9a234e153ea1df661ad32b0b2e95cdd0d274f48849c29bdb53e17
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: NARROW EDGE FOOT FOR IDT™ SYSTEM (compatible)
821142096 B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
18
Open source
Open cited PDF at page 18Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
3e6abb7ee922c596ad599ecc6787a0bdb3af3b9b9c2c411498a04403940747f4
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 1/4 INCH RIGHT GUIDE FOOT FOR IDT™ SYSTEM (compatible)
820924096 2. Engage the IDT™ system. 2. Engage the IDT™ system. B C D E F G J K
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
52
Open source
Open cited PDF at page 52Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
0d9c323e016c6eb393055819842b7ceee145c4fd5bd362486b6e50a398157336
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: PIPING FOOT (compatible)
820532096 as you sew. A B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
36
Open source
Open cited PDF at page 36Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
a30fd6023056fd63c4a244a5f55f9dd2bbecc7abf8a3d0919c6a24b1b2bb2acd
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: NARROW PIPING FOOT (compatible)
820918096 1. Snap on the Narrow Piping Foot. A B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
37
Open source
Open cited PDF at page 37Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
8976739c789855c2f5823b7375573d988d343927ad73b4e23a94a535f75b0eca
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: PERFECT ¼” FOOT WITH GUIDE FOR IDT™ SYSTEM (compatible)
821063096 3. Select a straight stitch. B C D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
50
Open source
Open cited PDF at page 50Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
0ce82e912b1a59ca503b4d479f577155064df45c2e287f5ebf11f00667724b73
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: PINTUCK FOOT, 5-GROOVE (compatible)
820226096 4. Using a water-soluble marker, draw a placement line for your first pintuck. B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
25
Open source
Open cited PDF at page 25Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
c9577256198b8e3261da82129b66f2fca0b7bda88c715549c6b9f57119e42fdf
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: JOIN AND FOLD EDGING FOOT FOR IDT™ SYSTEM (compatible)
820931096 2. Select the stitch you would like to use. For example: the edging could be sewn onto the base fabric D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
d2d5268ee74e5056024245024b6c87bb7dbb4cbf3e3c339f82b5f88bc11bf780
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: GATHERING FOOT (compatible)
820668096 B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
42
Open source
Open cited PDF at page 42Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
e483c9046f56c267be718cc0f9a7a025b6a82708dfa453d2b3cb133de163f544
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BUTTONHOLE FOOT (compatible)
820672096 No matter which machine model you have. A PFAFF® machine will always provide you with a perfect J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
62379fbe08cf13ccf587426b5bb07538e6cc40952a1a83af013c2d91353699bc
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ROLLED HEM FOOT (compatible)
820220096 2. Do not allow fabric to run under the right half of the presser foot. B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
17
Open source
Open cited PDF at page 17Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
39ebb96bfd5d614ab05ec36f79d063f5f4b6ca4e56ed6132daa7d5e5562f5e61
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: INVISIBLE ZIPPER FOOT (compatible)
820474096 opening. The zipper should be at least 2 cm to 3 cm (3/4 to 1 1/4 inch) longer than the opening. C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
14
Open source
Open cited PDF at page 14Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
0c98caca310f713667f0f849e3257181df1be664919b3ac90502ba31944b6084
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BUTTONHOLE FOOT (compatible)
413170301 J
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
df9948cae6f7939d77e8e3f5102d1b2c7d57350adf49c0f72906b93bb9d52d6f
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: OPEN-TOE APPLIQUÉ FOOT FOR IDT™ SYSTEM (compatible)
820213096 F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
31
Open source
Open cited PDF at page 31Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
7ceddf2a5f1a0c2cfa43088a045a16007ce883afa1fd361df7b0411edee7e7b4
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: RUFFLER (compatible)
820885096 J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
40
Open source
Open cited PDF at page 40Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
33bb115c6e922c6150c0dfccf383db9c2e71b328c28a689b3459437453a67c4c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ROLLER FOOT (compatible)
820663096 B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
19
Open source
Open cited PDF at page 19Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
d6231d3da3521ed4ccea170659c0a6e41d65a451219c45fe4981c31a00e31c37
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: SEWING STAR FOOT FOR IDT™ SYSTEM (compatible)
820654096 4. Sew as desired. D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
32
Open source
Open cited PDF at page 32Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
a2559233af42cc36c5ae14707b983f52a8ba32379aa528561663ed5aff73e357
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: FANCY STITCH FOOT FOR IDT™ SYSTEM (compatible)
820774096 G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
44
Open source
Open cited PDF at page 44Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
0dca063d7fa5cd78c0169d41ab96ac620078c324c32971bf684205a1f0f782c7
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BIAS BINDER (compatible)
820245096 5. Stitch about 25 mm (1 inch) along the Bias Tape. A B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
17
Open source
Open cited PDF at page 17Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
d697497cea7acacadb5d5b2d10eae3ca6616982ea3d1d2a2608c031bf2d9ed55
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR 1/4 INCH RIGHT GUIDE FOOT FOR IDT™ SYSTEM (compatible)
820881096 3. Select a straight stitch. D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
52
Open source
Open cited PDF at page 52Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
99efd0a56a23e4692179fde68d545b877e93be7528b8be2e7dccf5fa90eabe1b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: NON-STICK FOOT FOR IDT™ SYSTEM (compatible)
820664096 B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
19
Open source
Open cited PDF at page 19Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
71b6d6531828caea238e2d99c9d8d751a1e5424a23eb63227de87b2d9cbde73e
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: RIGHT EDGE BI-LEVEL FOOT FOR IDT™ SYSTEM (compatible)
821007096 3. Select a straight stitch or a decorative stitch. D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
21
Open source
Open cited PDF at page 21Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
fb448c318d74367412f7a3da61400dca39eff54f593ba1bf29511377c75d4c15
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BLINDHEM FOOT FOR IDT™ SYSTEM (compatible)
820256096 5. Use the needle position and the width dial to regulate the penetration of the needle in the crease. D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
18
Open source
Open cited PDF at page 18Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
44b2fb3213e1985448e675b6f1394dc71dde1426b886c0530e2b4e0f123c20c0
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: OPEN-TOE FREE-MOTION SPRING FOOT (compatible)
821141096 included in the package. Make sure the metal arm on the foot is placed above the needle clamp. J L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
54
Open source
Open cited PDF at page 54Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
9f964c2f9304b2fbe67a58c071b6f6015f91c9e6644a07c7d32bb14741652eed
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CHENILLE FOOT FOR IDT™ SYSTEM (compatible)
820615096 beautiful effect! B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
34
Open source
Open cited PDF at page 34Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
0811b0a86ffdeabff5376f2aae5e47866782eaa21d74eab2b63227a0c3ea1290
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BI-LEVEL TOPSTITCH FOOT FOR IDT™ SYSTEM (compatible)
820676096 3. select a straight stitch. D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
b64e78a842419c2e78863b6da89395f552f5200dd4ad51eec784e061119e8ef9
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BEADING FOOT, 4 MM & 6 MM (compatible)
820604096 For 4 mm beads Zigzag stitch length 3.5 width 4.0 C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
32
Open source
Open cited PDF at page 32Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
385e23b3963d494fa74cb91627b782099bd882d185c3979d71f91cc1c3020b67
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: SEW-ON BUTTON FOOT (compatible)
820473096 button to be placed. Manually turn the hand wheel to make sure C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
11
Open source
Open cited PDF at page 11Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
c1c66dc2a049ac163e3bddff9e1d0d3bc4e5b68366546a80b8243f7c14c50a9a
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: SEAM GUIDE FOOT FOR IDT™ SYSTEM (compatible)
820772096 2. Engage the IDT™ system. B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
11
Open source
Open cited PDF at page 11Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
bbc2e6cc42e30e55dd5420462f571a5fa8a5fb74741414fb1329bd237c4c3645
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ELASTIC FOOT FOR IDT™ SYSTEM (compatible)
820545096 3. Insert the elastic into the longer slot opening on the base of the presser foot. B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
74742c64b65a5f0b83e92132119edc90447dc4d6b180e0b42d96876961f47f2a
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: STITCH-IN-DITCH FOOT FOR IDT™ SYSTEM (compatible)
820925096 4. Place the quilt under the presser foot with the guide in the seam (ditch) of the pieced quilt patches. B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
53
Open source
Open cited PDF at page 53Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
5c4f236a34192299d2533b8d0e2839f4d5c4f5cd66f578290d1d4b6eea419fc6
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: MAGNETIC SEAM GUIDE (compatible)
821162096 J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
21
Open source
Open cited PDF at page 21Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
e2702183aba3df9a2025b75660d4b0efa988db6284c258ac01862b4ba2e2d357
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ADJUSTABLE GUIDE FOOT FOR IDT™ SYSTEM (compatible)
820677096 2. Engage the IDT™ system. D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
e9e7d26ddd59906e6e091d5c34e868da5ae0db3fa61a64a14a01dbbdd1115602
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR 1/4 INCH QUILTING FOOT FOR IDT™ SYSTEM (compatible)
820883096 5. When using 1/8 inch seam allowance, guide the fabric along the inner edge of the toe. When using D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
51
Open source
Open cited PDF at page 51Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
8ebfd536e092fa09aa218e1d3cd90834e949011acbec662c799265dabe009779
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR STITCH-IN-DITCH FOOT FOR IDT™ SYSTEM (compatible)
821143096 4. Place the quilt under the presser foot with the guide in the seam (ditch) of the pieced quilt patches. D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
53
Open source
Open cited PDF at page 53Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
e94d24ecb7b5eacb9e55f8a3e9896f4ce7dc64d70d60eabded59bc04580609cb
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 1/4 INCH QUILTING FOOT FOR IDT™ SYSTEM (compatible)
820926096 2. Engage the IDT™ system, if available on your machine. D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
51
Open source
Open cited PDF at page 51Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
240919334694bb7f0025ca5be51ecc3e8a1cac647f8e575287ccb23a4b77f2f0
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR OPEN TOE FOOT FOR IDT™ SYSTEM (compatible)
820916096 3. Choose a decorative stitch or a satin stitch. Use pattern mirror if needed. D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
31
Open source
Open cited PDF at page 31Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
41c7f97c27e5e9da72b0449ac0a0c33764e128d914ee684ab8a87a1672e72dfa
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: THREE HOLE YARN FOOT FOR IDT™ SYSTEM (compatible)
820920096 F G J L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
42
Open source
Open cited PDF at page 42Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
b6eb808ef79d61f703ebb305eccc8c0d36db4ea97ca0912e25d22e73dfd1ff66
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: APPLIQUÉ FOOT (compatible)
820214096 4. Place stabilizer underneath the appliqué area. Stitch over all edges to prevent fraying. Use “needle B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
29
Open source
Open cited PDF at page 29Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
e56c757ee8f0d10864077850f13dcc083f0faab1a5c309c94a38e508cc7b6ba6
Destination status
direct_pdf

What is supported, and what remains open?

1 supported answers and 10 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.

Unresolved owner questions (6)
  • What shank type is it?: Not established — Not yet verified: The reviewed passages do not state a standardized low-, high- or other shank class.
  • Will generic screw-on feet fit?: Not established — Not yet verified: Snap-on foot-to-holder attachment does not establish generic screw-on-foot compatibility.
  • Which third-party adapters fit?: Not established — Not yet verified: No third-party adapter compatibility is established.
  • Which bobbin class or system applies?: Not established — Not yet verified: The reviewed passages do not state a standardized bobbin class or system.
  • What bobbin dimensions and material apply?: Not established — Not yet verified: Bobbin dimensions, detailed profile, material and cross-model substitution equivalence are not established.
  • What hook system applies?: Not established — Not yet verified: The reviewed passages do not establish a standardized hook orientation or drive.

Report a correction or share an OEM source

Advanced provenance and dataset receipt

Public snapshot a1cc1aceef228fcf33329e37165ab888ce5b9fe3f13eb56967ae0fbf41d8d8a7

Catalog e156281c7d3048027b5ac89e7476be8f54dd5a9309505e96260b0455d3cd2a7e · exact native quotes only · dossier method sewgraph-model-dossier-v2