Stitch length
conditional
Turn the stitch-length dial to adjust length between 0 and 4 mm; a higher number gives a longer stitch.
- The separate stretch-stitch instructions apply only to hobby 1132.
Source evidence · 1 unique proof passage: Proof E1
PFAFF · verified physical machine
hobby 1122
Cited model code 1122
Identity verified · evidence for each owner answer
Identity verified · evidence for each answer
Using and maintaining this machine
Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.
Features and specifications
Reverse sewing
conditional
Push the reverse-stitch lever down to sew backward. Reverse sewing continues only while the control is pressed.
Source evidence · 1 unique proof passage: Proof E2
Bobbins and hook
Removal procedure
conditional
With the main switch off, push the throat-plate release button right, remove the throat plate and lift out the bobbin.
Source evidence · 1 unique proof passage: Proof E3
Thread path
conditional
Switch off the main switch. With the bobbin placed as pictured in the manual, pull thread into front notch A, then left between the tension-spring blades and into side notch B. Pull out about 10 cm (4 inches), attach the throat plate and check threading against its chart.
- The illustrated winding orientation must be followed; no bobbin class or substitution is established.
Source evidence · 1 unique proof passage: Proof E3
Presser feet and adapters
Extra lift
conditional
The foot can be raised about 1/4 inch (6 mm) above its normal raised position to help remove the foot or place heavy fabric.
- This is additional lift above the normal up position, not total presser-foot height.
Source evidence · 1 unique proof passage: Proof E4
Removal procedure
conditional
Switch off the main switch. Turn the handwheel to raise the needle fully, raise the presser foot and press the red button behind the holder.
Source evidence · 1 unique proof passage: Proof E4
Attachment procedure
conditional
With the main switch off, place the desired foot so its pins engage the holder when the lifter is lowered. Raise the lifter to check engagement.
Source evidence · 1 unique proof passage: Proof E4
Needles and threading
Insertion procedure
conditional
Switch off the main switch, lower the presser foot and insert the needle with its flat side toward the rear, pushing it fully upward. Hold the needle and tighten its screw firmly.
Source evidence · 1 unique proof passage: Proof E5
Detailed specifications, compatible parts, and source library
Evidence coverage
Core answers and cited items
Machine category: Not yet established
Core domains answered: None yet
Domains with cited compatible items: None yet
Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.
Official source library
Documents used on this page
Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.
PFAFF Hobby-1122.pdf (SVP manuals feed)
instruction manual
Open official source destination · 1 unique proof passage: Proof E1
Evidence library
8 exact proof passages from 1 OEM document
Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.
Open exact proof passages · 8 unique proof passages
Official OEM PDF
What this passage proves
- Stitch length: Turn the stitch-length dial to adjust length between 0 and 4 mm; a higher number gives a longer stitch.
Stitch length dial With the stitch length dial(E) you can adjust the stitch length to the required length, between 0 and 4 mm, by turning the dial to the setting mark (F). The higher the number, the longer the stitch The buttonhole marking shows the adjustment range when sewing the buttonhole. The further you turn the dial to 0, the higher the density of the stitch.
- Document
- PFAFF Hobby-1122.pdf (SVP manuals feed)
- Issuer
- PFAFF
- Extraction
- Native document text
- PDF page
- 22
- Open source
Advanced technical receipt
- Asset SHA-256
- f8899d499e083adcbd40193f44da1ae6f91a5ef97edabe867fe5b4a8be1cf473
- Locator
- 980bb98154e98f76cf0e6ed1be97cde75b705ea51d084fd76235e59fb4d0c5e4
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Reverse sewing: Push the reverse-stitch lever down to sew backward. Reverse sewing continues only while the control is pressed.
Reverse sewing Push the reverse stitch lever down to sew in reverse. The machine sews in reverse only as long as the reverse sewing button is pressed.
- Document
- PFAFF Hobby-1122.pdf (SVP manuals feed)
- Issuer
- PFAFF
- Extraction
- Native document text
- PDF page
- 24
- Open source
Advanced technical receipt
- Asset SHA-256
- f8899d499e083adcbd40193f44da1ae6f91a5ef97edabe867fe5b4a8be1cf473
- Locator
- 2677403b6d645eb5fc77179554a0ab5a45f2866193152b61db13892513b3b496
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Removal procedure: With the main switch off, push the throat-plate release button right, remove the throat plate and lift out the bobbin.
- Thread path: Switch off the main switch. With the bobbin placed as pictured in the manual, pull thread into front notch A, then left between the tension-spring blades and into side notch B. Pull out about 10 cm (4 inches), attach the throat plate and check threading against its chart.
Inserting the bobbin Turn off the main switch. Place the bobbin in the bobbin holder with the thread running off as shown in the picture. Pull the thread into the front notch (A) on the front side of the bobbin holder. Pull the thread to the left, sliding it between the tension spring blades. Continue to pull the thread lightly until the thread slips into the side notch (B). Pull out about 10 cm (4”) of thread. Attach the throat plate. Check the threading by referring to the chart shown on the throat plate (C). Removing the bobbin Push the throat plate release button (D) to the right and remove the throat plate (E). Lift out the bobbin.
- Document
- PFAFF Hobby-1122.pdf (SVP manuals feed)
- Issuer
- PFAFF
- Extraction
- Native document text
- PDF page
- 18
- Open source
Advanced technical receipt
- Asset SHA-256
- f8899d499e083adcbd40193f44da1ae6f91a5ef97edabe867fe5b4a8be1cf473
- Locator
- b9adc41a6f297123b51a325c88a6e3c73686c17a3c2731cd5025fd430539b250
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Extra lift: The foot can be raised about 1/4 inch (6 mm) above its normal raised position to help remove the foot or place heavy fabric.
- Removal procedure: Switch off the main switch. Turn the handwheel to raise the needle fully, raise the presser foot and press the red button behind the holder.
- Attachment procedure: With the main switch off, place the desired foot so its pins engage the holder when the lifter is lowered. Raise the lifter to check engagement.
Presser foot lifter The presser foot is raised or lowered with the presser foot lifter. You can raise the foot about 1/4" (6 mm) higher than the normal up position for easy removal of the presser foot, or to help you place heavy fabric under the foot. A Lowered position B Normal up position C Extra lift position Changing the presser foot Turn off the main switch. Removing the presser foot Raise the needle to its highest position by turning the handwheel. Raise the presser foot, and press the red button on the back of the foot holder. Engaging the presser foot Place the desired presser foot, so that when the presser foot lifter is lowered, the pins (D) of the foot engage in the presser foot holder. Note: Check that the presser foot is properly engaged by raising the presser foot lifter.
- Document
- PFAFF Hobby-1122.pdf (SVP manuals feed)
- Issuer
- PFAFF
- Extraction
- Native document text
- PDF page
- 14
- Open source
Advanced technical receipt
- Asset SHA-256
- f8899d499e083adcbd40193f44da1ae6f91a5ef97edabe867fe5b4a8be1cf473
- Locator
- 239ea00c3f3f2ed0d0bc27d68c31cbe33a63bd7afee2c47fe7f968ce7fd517e9
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Insertion procedure: Switch off the main switch, lower the presser foot and insert the needle with its flat side toward the rear, pushing it fully upward. Hold the needle and tighten its screw firmly.
Changing the needle Turn off the main switch. To remove the needle Lower the presser foot and move the needle to its highest point. Now loosen the needle screw (F) and pull the needle downwards. To insert the needle The Á at side of the needle must face to the rear. Lower the presser foot and insert the needle, pushing it up as far as it goes. Hold the needle and tighten the needle screw À rmly.
- Document
- PFAFF Hobby-1122.pdf (SVP manuals feed)
- Issuer
- PFAFF
- Extraction
- Native document text
- PDF page
- 15
- Open source
Advanced technical receipt
- Asset SHA-256
- f8899d499e083adcbd40193f44da1ae6f91a5ef97edabe867fe5b4a8be1cf473
- Locator
- 50a4d62449c08471ed0a093ad6b76360e1724517569431f5054018f690afe697
- Destination status
- direct_pdf
Official OEM PDF
hobby1132,1122 O w n e r ´ s m a n u a l
- Document
- PFAFF Hobby-1122.pdf (SVP manuals feed)
- Issuer
- PFAFF
- Extraction
- Native document text
- PDF page
- 1
- Open source
Advanced technical receipt
- Asset SHA-256
- f8899d499e083adcbd40193f44da1ae6f91a5ef97edabe867fe5b4a8be1cf473
- Locator
- 6bc0894506388a1c8c229ac8b1e582dd9702e997dc8a1e5a8dd089dadf5298b7
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Identity — preferred display name: hobby 1122
hobby1132,1122
- Document
- PFAFF Hobby-1122.pdf (SVP manuals feed)
- Issuer
- PFAFF
- Extraction
- Native document text
- PDF page
- 1
- Open source
Advanced technical receipt
- Asset SHA-256
- f8899d499e083adcbd40193f44da1ae6f91a5ef97edabe867fe5b4a8be1cf473
- Locator
- af56d9c81c48c2ced82d55efd117a3040f990c2d0aec7ad08e652b3336e61741
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Identity — model code: 1122
hobby1132,1122
- Document
- PFAFF Hobby-1122.pdf (SVP manuals feed)
- Issuer
- PFAFF
- Extraction
- Native document text
- PDF page
- 1
- Open source
Advanced technical receipt
- Asset SHA-256
- f8899d499e083adcbd40193f44da1ae6f91a5ef97edabe867fe5b4a8be1cf473
- Locator
- e3e5496d51b25fab70be9670fa23901e8bafaa6bde4a05828673ea4bef7e9483
- Destination status
- direct_pdf
What is supported, and what remains open?
0 supported answers and 8 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.
Unresolved owner questions (4)
- Class system: Not established — Not yet verified: A standardized class or system is not admitted from these operating procedures.
- Part dimensions material: Not established — Not yet verified: Part-number, dimensions and material claims require separate exact review.
- Standardized mount fit: Not established — Not yet verified: These procedures do not establish standardized shank, holder geometry, adapter or item interchangeability.
- System: Not established — Not yet verified: Needle-system selection is outside this bounded operating-instruction pilot.
Advanced provenance and dataset receipt
Public snapshot 9fbab95052af3592248650db659cecddd639c95077005c97e3707a37bf47b400
Source export 6e957329ab8ac4acea57fdae38d1ce6f6035f1146fe4e049ce0a57912e6a6da7 · source method recorded on each citation