SewGraph

pfaff · verified physical machine

performance 2058

View cited identity evidence · 3 unique proof passages

Jump to: Proof E1, Proof E2, Proof E3

verified exact machine · 1/3 core systems

Identity verified · evidence for each answer

Using and maintaining this machine

Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.

Presser feet and adapters

How do ordinary presser feet attach?

conditional

Native snap-on feet. Ordinary presser feet attach by aligning the foot pins with the gap under the holder until the foot snaps into place.

  • This proves only the exact foot-to-holder attachment described in this manual; it does not establish a standardized shank or generic screw-on compatibility.

Source evidence · 1 unique proof passage: Profile Proof E1

Bobbins and hook

How is a bobbin wound?

conditional

Wind an empty bobbin through the manual’s stated guide and tension path.

  • Follow the exact machine-specific spool position, threading path and operating controls.

Source evidence · 1 unique proof passage: Profile Proof E2

How is the bobbin inserted?

conditional

Insert the bobbin in its removable case so it turns clockwise, then push the case fully onto its hook pin.

  • Follow the exact tension-spring, guide and cutter path stated in the manual.

Source evidence · 1 unique proof passage: Profile Proof E3

Needles and threading

Which needle system applies?

conditional

Use needle system 130/705 H when correcting skipped stitches.

  • This is troubleshooting-scoped and is not generalized beyond the exact manual.

Source evidence · 1 unique proof passage: Profile Proof E4

Which way does the needle face?

conditional

Push the needle fully up with its flat side facing the back.

  • Follow the manual’s exact insertion and tightening procedure.

Source evidence · 1 unique proof passage: Profile Proof E5

When should the needle be replaced?

conditional

Change the needle often and use a straight needle with a sharp point.

  • Replace damaged, bent or blunt needles as described by the manual.

Source evidence · 1 unique proof passage: Profile Proof E4

Features and specifications

Can the feed dogs be lowered?

conditional

Feed dogs can be lowered using either slide described by the manual.

  • Follow the manual’s presser-foot and re-engagement instructions.

Source evidence · 1 unique proof passage: Profile Proof E6

Care and ownership

How should it be cleaned?

conditional

Clean the feed dogs and hook area with the brush every 10–15 operating hours.

  • Turn off the machine and follow the manual’s access procedure.

Source evidence · 1 unique proof passage: Profile Proof E7

Sources for the owner answers above
Official OEM PDF

What this passage supports

  • Can the feed dogs be lowered?: Feed dogs can be lowered using either slide described by the manual.
Lowering the feed dogs Push slide A or B to the left
Document
PFAFF Performance2058_EN.pdf (SVP manuals feed)
Issuer
PFAFF
Extraction
Native document text
PDF page
23
Open source
Open cited PDF at page 23Open OEM source or support page
Advanced technical receipt
Asset SHA-256
6f22b3bdb06770712ac9c3a7f365d4a704fb684fa9023bbf5c01ed9d683200f3
Locator
0af2ade84b61800a9a855bd2bd26033788ebfe90ad582cf31c1d30683ff6aff4
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • How is a bobbin wound?: Wind an empty bobbin through the manual’s stated guide and tension path.
Preparing the machine for bobbin winding The Pfaff logo is facing up.
Document
PFAFF Performance2058_EN.pdf (SVP manuals feed)
Issuer
PFAFF
Extraction
Native document text
PDF page
24
Open source
Open cited PDF at page 24Open OEM source or support page
Advanced technical receipt
Asset SHA-256
6f22b3bdb06770712ac9c3a7f365d4a704fb684fa9023bbf5c01ed9d683200f3
Locator
36ac567fffa030c841503fa965a715048273241aa1bf2368a7e42310799b420f
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Which needle system applies?: Use needle system 130/705 H when correcting skipped stitches.
  • When should the needle be replaced?: Change the needle often and use a straight needle with a sharp point.
Needle system 130/705 H
Document
PFAFF Performance2058_EN.pdf (SVP manuals feed)
Issuer
PFAFF
Extraction
Native document text
PDF page
97
Open source
Open cited PDF at page 97Open OEM source or support page
Advanced technical receipt
Asset SHA-256
6f22b3bdb06770712ac9c3a7f365d4a704fb684fa9023bbf5c01ed9d683200f3
Locator
71a29e756f6894f0fb68ba3bf4638c0ef3a6fab67a75540d2b0af33e5813a2c3
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Which way does the needle face?: Push the needle fully up with its flat side facing the back.
The flat side of the needle must face to the rear. pushing it up as far as it will go
Document
PFAFF Performance2058_EN.pdf (SVP manuals feed)
Issuer
PFAFF
Extraction
Native document text
PDF page
31
Open source
Open cited PDF at page 31Open OEM source or support page
Advanced technical receipt
Asset SHA-256
6f22b3bdb06770712ac9c3a7f365d4a704fb684fa9023bbf5c01ed9d683200f3
Locator
94366961543102024b13add4e545443d52fd589a059266920ba6dec43e217e47
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • How is the bobbin inserted?: Insert the bobbin in its removable case so it turns clockwise, then push the case fully onto its hook pin.
Inserting the bobbin and bobbin case push the bobbin case fully onto pin C bobbin must turn clockwise
Document
PFAFF Performance2058_EN.pdf (SVP manuals feed)
Issuer
PFAFF
Extraction
Native document text
PDF page
27
Open source
Open cited PDF at page 27Open OEM source or support page
Advanced technical receipt
Asset SHA-256
6f22b3bdb06770712ac9c3a7f365d4a704fb684fa9023bbf5c01ed9d683200f3
Locator
cd657358bf7d9d2cae6c823aca4617db175d7653ecec23366c925dac3f039589
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • How do ordinary presser feet attach?: Ordinary presser feet attach by aligning the foot pins with the gap under the holder until the foot snaps into place.
Changing the presser foot pins of the foot snap onto the presser foot holder
Document
PFAFF Performance2058_EN.pdf (SVP manuals feed)
Issuer
PFAFF
Extraction
Native document text
PDF page
21
Open source
Open cited PDF at page 21Open OEM source or support page
Advanced technical receipt
Asset SHA-256
6f22b3bdb06770712ac9c3a7f365d4a704fb684fa9023bbf5c01ed9d683200f3
Locator
d0bd6059ea447b80053b01381b35485585815e8e891bf339a9aa9458bfbc2a69
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • How should it be cleaned?: Clean the feed dogs and hook area with the brush every 10–15 operating hours.
Clean the feed dogs and hook area with the brush. after every 10 - 15 hours of operation.
Document
PFAFF Performance2058_EN.pdf (SVP manuals feed)
Issuer
PFAFF
Extraction
Native document text
PDF page
88
Open source
Open cited PDF at page 88Open OEM source or support page
Advanced technical receipt
Asset SHA-256
6f22b3bdb06770712ac9c3a7f365d4a704fb684fa9023bbf5c01ed9d683200f3
Locator
e677e69ea6508f93854db96a09d0b40c2661f192b8db3c2b387218133909d9f5
Destination status
direct_pdf
Machine facets and OEM groups

Cited machine facets

Identity and compatibility badges

Identity families, physical traits, and OEM accessory groups stay separate. A group badge applies only to its named program and domains.

integrated dual feed systemidtmaximum stitch width mm9needle system130 · 705HOEM group · accessory, presser footPFAFF Accessory Group: PFAFF Group G
Detailed specifications, compatible parts, and source library

Evidence coverage

Core answers and cited items

Machine category

domestic sewing

View machine-type evidence · 1 unique proof passage: Proof E4

View proof JSONReport this claim

Core domains answered: needle

Domains with cited compatible items: presser foot (34)

bobbinReviewed — not established
needleCore answer answered
presser foot34 cited items; core not established

Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.

Specifications

Documented machine facts

Multiple cited representations for one field share one row. SewGraph preserves every value and exact proof passage; it does not guess which representation is “raw” or “normalized” when the public projection does not label that distinction.

presser foot

integrated dual feed systemidt

View exact evidence · 1 unique proof passage: Proof E5

maximum stitch width mm9

View exact evidence · 1 unique proof passage: Proof E5

needle

needle system130/705H

View exact evidence · 1 unique proof passage: Proof E6

Parts & accessories

34 documented relationships

A two-hop result joins the machine’s official accessory-group membership to the OEM part matrix. Open the evidence to inspect both hops.

34 relationships shown

presser foot · 34

BI-LEVEL TOPSTITCH FOOT FOR IDT™ SYSTEM
820676096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E8

View proof JSONReport this claim
PINTUCK FOOT, 5-GROOVE
820226096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E9

View proof JSONReport this claim
ELASTIC FOOT FOR IDT™ SYSTEM
820545096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E10

View proof JSONReport this claim
CLEAR 1/4 INCH RIGHT GUIDE FOOT FOR IDT™ SYSTEM
820881096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E11

View proof JSONReport this claim
SEWING STAR FOOT FOR IDT™ SYSTEM
820654096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E12

View proof JSONReport this claim
CLEAR STITCH-IN-DITCH FOOT FOR IDT™ SYSTEM
821143096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E13

View proof JSONReport this claim
PERFECT ¼” FOOT WITH GUIDE FOR IDT™ SYSTEM
821063096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E14

View proof JSONReport this claim
SEAM GUIDE FOOT FOR IDT™ SYSTEM
820772096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E15

View proof JSONReport this claim
SEW-ON BUTTON FOOT
820473096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E16

View proof JSONReport this claim
APPLIQUÉ FOOT
820214096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E17

View proof JSONReport this claim
CLEAR OPEN TOE FOOT FOR IDT™ SYSTEM
820916096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E18

View proof JSONReport this claim
CHENILLE FOOT FOR IDT™ SYSTEM
820615096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E19

View proof JSONReport this claim
PIPING FOOT
820532096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E20

View proof JSONReport this claim
BEADING FOOT, 4 MM & 6 MM
820604096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E21

View proof JSONReport this claim
ROLLER FOOT
820663096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E22

View proof JSONReport this claim
NARROW PIPING FOOT
820918096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E23

View proof JSONReport this claim
FANCY STITCH FOOT FOR IDT™ SYSTEM
820774096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E24

View proof JSONReport this claim
OPEN-TOE APPLIQUÉ FOOT FOR IDT™ SYSTEM
820213096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E25

View proof JSONReport this claim
BLINDHEM FOOT FOR IDT™ SYSTEM
820256096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E26

View proof JSONReport this claim
CLEAR 1/4 INCH QUILTING FOOT FOR IDT™ SYSTEM
820883096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E27

View proof JSONReport this claim
INVISIBLE ZIPPER FOOT
820474096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E28

View proof JSONReport this claim
RIGHT EDGE BI-LEVEL FOOT FOR IDT™ SYSTEM
821007096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E29

View proof JSONReport this claim
ROLLED HEM FOOT
820220096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E30

View proof JSONReport this claim
1/4 INCH RIGHT GUIDE FOOT FOR IDT™ SYSTEM
820924096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E31

View proof JSONReport this claim
BIAS BINDER
820245096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E32

View proof JSONReport this claim
NARROW EDGE FOOT FOR IDT™ SYSTEM
821142096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E33

View proof JSONReport this claim
THREE HOLE YARN FOOT FOR IDT™ SYSTEM
820920096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E34

View proof JSONReport this claim
JOIN AND FOLD EDGING FOOT FOR IDT™ SYSTEM
820931096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E35

View proof JSONReport this claim
STITCH-IN-DITCH FOOT FOR IDT™ SYSTEM
820925096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E36

View proof JSONReport this claim
ADJUSTABLE GUIDE FOOT FOR IDT™ SYSTEM
820677096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E37

View proof JSONReport this claim
OPEN TOE FREE-MOTION FOOT
820544096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E38

View proof JSONReport this claim
NON-STICK FOOT FOR IDT™ SYSTEM
820664096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E39

View proof JSONReport this claim
GATHERING FOOT
820668096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E40

View proof JSONReport this claim
1/4 INCH QUILTING FOOT FOR IDT™ SYSTEM
820926096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group G, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E41

View proof JSONReport this claim

OEM compatibility programs

Documented group memberships

Group codes are namespaced to the issuing OEM program and apply only to the cited domains. They are not machine series and do not prove compatibility outside those domains.

PFAFF Group G

PFAFF Accessory Group · code G

Applies to: accessory, presser foot

View machine-to-group evidence · 1 unique proof passage: Proof E7

View proof JSONReport this claim

Official source library

Documents used on this page

Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.

PFAFF Performance2058_EN.pdf (SVP manuals feed)

instruction manual

Open official source destination · 1 unique proof passage: Proof E3

PFAFF Accessory Catalogue 2022

accessory compatibility

Open official source destination · 1 unique proof passage: Proof E1

Evidence library

41 exact proof passages from 2 OEM documents

Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.

Open exact proof passages · 41 unique proof passages
Official OEM PDF

What this passage proves

  • Identity — model code: performance 2058
  • Identity — preferred display name: performance 2058
performance™ 2058
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
6
Open source
Open cited PDF at page 6Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
e5a7adf20c338117d9dac80ce24219cfee04f01091ccbef3036798188570647b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: performance 2058
performance™ 2058
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
6
Open source
Open cited PDF at page 6Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
4db5aa441bca03f37c9e1c7df8d96838318d9469cf32931e4ca1691d04a9b64f
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: performance 2058
Give free rein to your imagination and discover your own passion for sewing together with one of the greatest sewing machines in the world - performance 2058 from Pfaff.
Document
PFAFF Performance2058_EN.pdf (SVP manuals feed)
Issuer
PFAFF
Extraction
native
PDF page
3
Open source
Open cited PDF at page 3Open OEM source or support page
Advanced technical receipt
Asset SHA-256
6f22b3bdb06770712ac9c3a7f365d4a704fb684fa9023bbf5c01ed9d683200f3
Locator
6b45af357ef6ad649101ffdc0086387a893c397e1f9da4e357f5ee8781d4f007
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Machine category — machine type: domestic sewing
This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594
Document
PFAFF Performance2058_EN.pdf (SVP manuals feed)
Issuer
PFAFF
Extraction
native
PDF page
2
Open source
Open cited PDF at page 2Open OEM source or support page
Advanced technical receipt
Asset SHA-256
6f22b3bdb06770712ac9c3a7f365d4a704fb684fa9023bbf5c01ed9d683200f3
Locator
11e1d00bcbe5e0995c3de96dc87f63d1d45297c6e2a20e369d049af2f0f6317c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • presser foot fact — integrated dual feed system: idt
  • presser foot fact — maximum stitch width mm: 9
G Machines with 9 mm stitch width, and IDT™ system creative™ 2170 , 2144, 2140, 2134 creative™ 7570, 7562, 7550, 7530 performance™ 2058
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
6
Open source
Open cited PDF at page 6Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
969b12f5a0c7105dfe8b22ef31c3b3cb1744e706e6481a952d5ef8de036e3e70
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • needle fact — needle system: 130/705H
  • Needle answer — 130/705H
Use needle system 130/705 H.
Document
PFAFF Performance2058_EN.pdf (SVP manuals feed)
Issuer
PFAFF
Extraction
native
PDF page
90
Open source
Open cited PDF at page 90Open OEM source or support page
Advanced technical receipt
Asset SHA-256
6f22b3bdb06770712ac9c3a7f365d4a704fb684fa9023bbf5c01ed9d683200f3
Locator
6d3660924a4b25bad5910cf84955c177083046d6c99e0ca5a08a3c8eaec1e7aa
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • OEM program membership — PFAFF Accessory Group: PFAFF Group G
  • Item fitment path — this machine's OEM group membership for BI-LEVEL TOPSTITCH FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for PINTUCK FOOT, 5-GROOVE
  • Item fitment path — this machine's OEM group membership for ELASTIC FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for CLEAR 1/4 INCH RIGHT GUIDE FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for SEWING STAR FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for CLEAR STITCH-IN-DITCH FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for PERFECT ¼” FOOT WITH GUIDE FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for SEAM GUIDE FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for SEW-ON BUTTON FOOT
  • Item fitment path — this machine's OEM group membership for APPLIQUÉ FOOT
  • Item fitment path — this machine's OEM group membership for CLEAR OPEN TOE FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for CHENILLE FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for PIPING FOOT
  • Item fitment path — this machine's OEM group membership for BEADING FOOT, 4 MM & 6 MM
  • Item fitment path — this machine's OEM group membership for ROLLER FOOT
  • Item fitment path — this machine's OEM group membership for NARROW PIPING FOOT
  • Item fitment path — this machine's OEM group membership for FANCY STITCH FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for OPEN-TOE APPLIQUÉ FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for BLINDHEM FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for CLEAR 1/4 INCH QUILTING FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for INVISIBLE ZIPPER FOOT
  • Item fitment path — this machine's OEM group membership for RIGHT EDGE BI-LEVEL FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for ROLLED HEM FOOT
  • Item fitment path — this machine's OEM group membership for 1/4 INCH RIGHT GUIDE FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for BIAS BINDER
  • Item fitment path — this machine's OEM group membership for NARROW EDGE FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for THREE HOLE YARN FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for JOIN AND FOLD EDGING FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for STITCH-IN-DITCH FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for ADJUSTABLE GUIDE FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for OPEN TOE FREE-MOTION FOOT
  • Item fitment path — this machine's OEM group membership for NON-STICK FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for GATHERING FOOT
  • Item fitment path — this machine's OEM group membership for 1/4 INCH QUILTING FOOT FOR IDT™ SYSTEM
G Machines with 9 mm stitch width, and IDT™ system creative™ 2170 , 2144, 2140, 2134 creative™ 7570, 7562, 7550, 7530 performance™ 2058
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
6
Open source
Open cited PDF at page 6Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
79408343e8010ab22d9dc990d18a1f467ac9706eacff64f9f56fb36cfaf0b937
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BI-LEVEL TOPSTITCH FOOT FOR IDT™ SYSTEM (compatible)
820676096 3. select a straight stitch. D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
b64e78a842419c2e78863b6da89395f552f5200dd4ad51eec784e061119e8ef9
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: PINTUCK FOOT, 5-GROOVE (compatible)
820226096 4. Using a water-soluble marker, draw a placement line for your first pintuck. B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
25
Open source
Open cited PDF at page 25Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
c9577256198b8e3261da82129b66f2fca0b7bda88c715549c6b9f57119e42fdf
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ELASTIC FOOT FOR IDT™ SYSTEM (compatible)
820545096 3. Insert the elastic into the longer slot opening on the base of the presser foot. B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
74742c64b65a5f0b83e92132119edc90447dc4d6b180e0b42d96876961f47f2a
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR 1/4 INCH RIGHT GUIDE FOOT FOR IDT™ SYSTEM (compatible)
820881096 3. Select a straight stitch. D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
52
Open source
Open cited PDF at page 52Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
99efd0a56a23e4692179fde68d545b877e93be7528b8be2e7dccf5fa90eabe1b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: SEWING STAR FOOT FOR IDT™ SYSTEM (compatible)
820654096 4. Sew as desired. D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
32
Open source
Open cited PDF at page 32Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
a2559233af42cc36c5ae14707b983f52a8ba32379aa528561663ed5aff73e357
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR STITCH-IN-DITCH FOOT FOR IDT™ SYSTEM (compatible)
821143096 4. Place the quilt under the presser foot with the guide in the seam (ditch) of the pieced quilt patches. D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
53
Open source
Open cited PDF at page 53Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
e94d24ecb7b5eacb9e55f8a3e9896f4ce7dc64d70d60eabded59bc04580609cb
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: PERFECT ¼” FOOT WITH GUIDE FOR IDT™ SYSTEM (compatible)
821063096 3. Select a straight stitch. B C D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
50
Open source
Open cited PDF at page 50Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
0ce82e912b1a59ca503b4d479f577155064df45c2e287f5ebf11f00667724b73
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: SEAM GUIDE FOOT FOR IDT™ SYSTEM (compatible)
820772096 2. Engage the IDT™ system. B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
11
Open source
Open cited PDF at page 11Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
bbc2e6cc42e30e55dd5420462f571a5fa8a5fb74741414fb1329bd237c4c3645
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: SEW-ON BUTTON FOOT (compatible)
820473096 button to be placed. Manually turn the hand wheel to make sure C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
11
Open source
Open cited PDF at page 11Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
c1c66dc2a049ac163e3bddff9e1d0d3bc4e5b68366546a80b8243f7c14c50a9a
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: APPLIQUÉ FOOT (compatible)
820214096 4. Place stabilizer underneath the appliqué area. Stitch over all edges to prevent fraying. Use “needle B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
29
Open source
Open cited PDF at page 29Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
e56c757ee8f0d10864077850f13dcc083f0faab1a5c309c94a38e508cc7b6ba6
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR OPEN TOE FOOT FOR IDT™ SYSTEM (compatible)
820916096 3. Choose a decorative stitch or a satin stitch. Use pattern mirror if needed. D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
31
Open source
Open cited PDF at page 31Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
41c7f97c27e5e9da72b0449ac0a0c33764e128d914ee684ab8a87a1672e72dfa
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CHENILLE FOOT FOR IDT™ SYSTEM (compatible)
820615096 beautiful effect! B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
34
Open source
Open cited PDF at page 34Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
0811b0a86ffdeabff5376f2aae5e47866782eaa21d74eab2b63227a0c3ea1290
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: PIPING FOOT (compatible)
820532096 as you sew. A B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
36
Open source
Open cited PDF at page 36Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
a30fd6023056fd63c4a244a5f55f9dd2bbecc7abf8a3d0919c6a24b1b2bb2acd
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BEADING FOOT, 4 MM & 6 MM (compatible)
820604096 For 4 mm beads Zigzag stitch length 3.5 width 4.0 C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
32
Open source
Open cited PDF at page 32Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
385e23b3963d494fa74cb91627b782099bd882d185c3979d71f91cc1c3020b67
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ROLLER FOOT (compatible)
820663096 B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
19
Open source
Open cited PDF at page 19Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
d6231d3da3521ed4ccea170659c0a6e41d65a451219c45fe4981c31a00e31c37
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: NARROW PIPING FOOT (compatible)
820918096 1. Snap on the Narrow Piping Foot. A B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
37
Open source
Open cited PDF at page 37Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
8976739c789855c2f5823b7375573d988d343927ad73b4e23a94a535f75b0eca
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: FANCY STITCH FOOT FOR IDT™ SYSTEM (compatible)
820774096 G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
44
Open source
Open cited PDF at page 44Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
0dca063d7fa5cd78c0169d41ab96ac620078c324c32971bf684205a1f0f782c7
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: OPEN-TOE APPLIQUÉ FOOT FOR IDT™ SYSTEM (compatible)
820213096 F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
31
Open source
Open cited PDF at page 31Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
7ceddf2a5f1a0c2cfa43088a045a16007ce883afa1fd361df7b0411edee7e7b4
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BLINDHEM FOOT FOR IDT™ SYSTEM (compatible)
820256096 5. Use the needle position and the width dial to regulate the penetration of the needle in the crease. D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
18
Open source
Open cited PDF at page 18Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
44b2fb3213e1985448e675b6f1394dc71dde1426b886c0530e2b4e0f123c20c0
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR 1/4 INCH QUILTING FOOT FOR IDT™ SYSTEM (compatible)
820883096 5. When using 1/8 inch seam allowance, guide the fabric along the inner edge of the toe. When using D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
51
Open source
Open cited PDF at page 51Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
8ebfd536e092fa09aa218e1d3cd90834e949011acbec662c799265dabe009779
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: INVISIBLE ZIPPER FOOT (compatible)
820474096 opening. The zipper should be at least 2 cm to 3 cm (3/4 to 1 1/4 inch) longer than the opening. C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
14
Open source
Open cited PDF at page 14Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
0c98caca310f713667f0f849e3257181df1be664919b3ac90502ba31944b6084
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: RIGHT EDGE BI-LEVEL FOOT FOR IDT™ SYSTEM (compatible)
821007096 3. Select a straight stitch or a decorative stitch. D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
21
Open source
Open cited PDF at page 21Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
fb448c318d74367412f7a3da61400dca39eff54f593ba1bf29511377c75d4c15
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ROLLED HEM FOOT (compatible)
820220096 2. Do not allow fabric to run under the right half of the presser foot. B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
17
Open source
Open cited PDF at page 17Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
39ebb96bfd5d614ab05ec36f79d063f5f4b6ca4e56ed6132daa7d5e5562f5e61
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 1/4 INCH RIGHT GUIDE FOOT FOR IDT™ SYSTEM (compatible)
820924096 2. Engage the IDT™ system. 2. Engage the IDT™ system. B C D E F G J K
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
52
Open source
Open cited PDF at page 52Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
0d9c323e016c6eb393055819842b7ceee145c4fd5bd362486b6e50a398157336
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BIAS BINDER (compatible)
820245096 5. Stitch about 25 mm (1 inch) along the Bias Tape. A B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
17
Open source
Open cited PDF at page 17Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
d697497cea7acacadb5d5b2d10eae3ca6616982ea3d1d2a2608c031bf2d9ed55
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: NARROW EDGE FOOT FOR IDT™ SYSTEM (compatible)
821142096 B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
18
Open source
Open cited PDF at page 18Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
3e6abb7ee922c596ad599ecc6787a0bdb3af3b9b9c2c411498a04403940747f4
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: THREE HOLE YARN FOOT FOR IDT™ SYSTEM (compatible)
820920096 F G J L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
42
Open source
Open cited PDF at page 42Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
b6eb808ef79d61f703ebb305eccc8c0d36db4ea97ca0912e25d22e73dfd1ff66
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: JOIN AND FOLD EDGING FOOT FOR IDT™ SYSTEM (compatible)
820931096 2. Select the stitch you would like to use. For example: the edging could be sewn onto the base fabric D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
d2d5268ee74e5056024245024b6c87bb7dbb4cbf3e3c339f82b5f88bc11bf780
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: STITCH-IN-DITCH FOOT FOR IDT™ SYSTEM (compatible)
820925096 4. Place the quilt under the presser foot with the guide in the seam (ditch) of the pieced quilt patches. B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
53
Open source
Open cited PDF at page 53Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
5c4f236a34192299d2533b8d0e2839f4d5c4f5cd66f578290d1d4b6eea419fc6
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ADJUSTABLE GUIDE FOOT FOR IDT™ SYSTEM (compatible)
820677096 2. Engage the IDT™ system. D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
e9e7d26ddd59906e6e091d5c34e868da5ae0db3fa61a64a14a01dbbdd1115602
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: OPEN TOE FREE-MOTION FOOT (compatible)
820544096 foot holder as far as it will go. Make sure the clear arm is above the needle clamp. C D E F G
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
54
Open source
Open cited PDF at page 54Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
3b663b156210062e3f0d7b7c840b54e08398944b2b0f49881312f82709bd0d2d
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: NON-STICK FOOT FOR IDT™ SYSTEM (compatible)
820664096 B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
19
Open source
Open cited PDF at page 19Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
71b6d6531828caea238e2d99c9d8d751a1e5424a23eb63227de87b2d9cbde73e
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: GATHERING FOOT (compatible)
820668096 B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
42
Open source
Open cited PDF at page 42Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
e483c9046f56c267be718cc0f9a7a025b6a82708dfa453d2b3cb133de163f544
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 1/4 INCH QUILTING FOOT FOR IDT™ SYSTEM (compatible)
820926096 2. Engage the IDT™ system, if available on your machine. D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
51
Open source
Open cited PDF at page 51Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
240919334694bb7f0025ca5be51ecc3e8a1cac647f8e575287ccb23a4b77f2f0
Destination status
direct_pdf

What is supported, and what remains open?

0 supported answers and 8 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.

Unresolved owner questions (7)
  • What shank type is it?: Not established — Not yet verified: The reviewed passages do not state a standardized low-, high- or other shank class.
  • Will generic screw-on feet fit?: Not established — Not yet verified: Snap-on foot-to-holder attachment does not establish generic screw-on-foot compatibility.
  • Which third-party adapters fit?: Not established — Not yet verified: No third-party adapter compatibility is established.
  • Which bobbin class or system applies?: Not established — Not yet verified: The reviewed passages do not state a standardized bobbin class or system.
  • What bobbin dimensions and material apply?: Not established — Not yet verified: Bobbin dimensions, detailed profile, material and cross-model substitution equivalence are not established.
  • What hook system applies?: Not established — Not yet verified: The reviewed passages do not establish a standardized hook orientation or drive.
  • Does it require owner oiling?: Not established — Not yet verified: The reviewed passages do not state a no-oiling or owner-oiling rule.

Report a correction or share an OEM source

Advanced provenance and dataset receipt

Public snapshot a1cc1aceef228fcf33329e37165ab888ce5b9fe3f13eb56967ae0fbf41d8d8a7

Catalog e156281c7d3048027b5ac89e7476be8f54dd5a9309505e96260b0455d3cd2a7e · exact native quotes only · dossier method sewgraph-model-dossier-v2