SewGraph

pfaff · verified physical machine

quilt ambition™ 630

Cited model code 630

View cited identity evidence · 6 unique proof passages

Jump to: Proof E1, Proof E2, Proof E3, Proof E4, Proof E5, Proof E6

verified exact machine · 2/3 core systems

Identity verified · evidence for each answer

Using and maintaining this machine

Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.

Presser feet and adapters

Do ordinary presser feet snap on?

conditional

Native snap-on feet. Ordinary presser feet snap onto the presser-foot holder.

  • Lowering the presser-foot lift engages the foot notch with the holder pins. This establishes foot-to-holder attachment only.

Source evidence · 1 unique proof passage: Profile Proof E1

Is extra presser-foot lift available?

conditional

The presser foot can be raised higher for heavy fabric or several layers.

  • The manual does not state a numeric clearance. This does not establish shank geometry or universal-foot fit.

Source evidence · 1 unique proof passage: Profile Proof E2

Bobbins and hook

How is a bobbin wound?

conditional

Wind an empty bobbin from the horizontal spool position through the stated guides and tension disc.

  • Thread the bobbin hole from inside to outside, push the winder lever right and use the foot control or start/stop button.

Source evidence · 1 unique proof passage: Profile Proof E3

How is the bobbin inserted?

conditional

Insert the bobbin with thread running counterclockwise, then follow the marked needle-plate guide path.

  • Raise the needle fully and turn off the machine before insertion or removal.

Source evidence · 1 unique proof passage: Profile Proof E4

Needles and threading

Which needle system does it use?

supported

Needle system 130/705 H.

Source evidence · 1 unique proof passage: Profile Proof E5

Which way does the needle face?

conditional

Push the needle fully upward with its flat side facing away from you.

  • Tighten the needle screw as firmly as directed.

Source evidence · 1 unique proof passage: Profile Proof E2

When should the needle be replaced?

conditional

Replace a bent or blunt needle.

  • The troubleshooting section directs inserting a new needle when it is bent or blunt.

Source evidence · 1 unique proof passage: Profile Proof E5

Features and specifications

Does it have a free arm?

supported

Free arm available after sliding the accessory tray to the left.

Source evidence · 1 unique proof passage: Profile Proof E6

Can the feed dogs be lowered?

conditional

Feed dogs can be lowered or raised with the switch at the back of the free arm.

  • Move the switch left to lower and right to raise.

Source evidence · 1 unique proof passage: Profile Proof E2

Can the needle stop position be changed?

conditional

A needle stop up/down button changes the needle stop position.

  • When needle-down is active, its indicator is lit and the needle stops down.

Source evidence · 1 unique proof passage: Profile Proof E7

Can it sew without the foot control?

supported

A start/stop button operates the machine without the foot control.

Source evidence · 1 unique proof passage: Profile Proof E8

How is maximum sewing speed controlled?

conditional

A speed-control lever sets the maximum sewing speed.

  • Move the lever upward for faster sewing and downward for slower sewing.

Source evidence · 1 unique proof passage: Profile Proof E8

Care and ownership

Does it require owner oiling?

supported

No owner lubrication (oiling) is needed.

Source evidence · 1 unique proof passage: Profile Proof E9

How should the bobbin area be cleaned?

conditional

Clean the feed dogs and bobbin area with the included brush.

  • Turn off the machine and follow the manual removal steps; do not blow air into the bobbin-case area.

Source evidence · 1 unique proof passage: Profile Proof E9

How is the bobbin case reinstalled?

conditional

Replace the bobbin case with its tip fitted into the stopper.

  • This is placement guidance, not a standardized hook-type classification.

Source evidence · 1 unique proof passage: Profile Proof E9

Sources for the owner answers above
Official OEM PDF

What this passage supports

  • Do ordinary presser feet snap on?: Ordinary presser feet snap onto the presser-foot holder.
Changing the Presser Foot disengages from the presser foot holder. lining up the notch (B) with the pins (C) will engage in the presser foot holder.
Document
PFAFF ambition 620 / 630 User's Guide
Issuer
PFAFF
Extraction
Native document text
PDF page
27
Open source
Open cited PDF at page 27Open OEM source or support page
Advanced technical receipt
Asset SHA-256
293704a451da9a631e14669ed6f34ca3cb752468676c86d35048420271f37ac7
Locator
00ab4a8e6b8313305d76ea2a0d46735fb6aa20a4d5e1525b6080a6914bce93fe
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Can it sew without the foot control?: A start/stop button operates the machine without the foot control.
  • How is maximum sewing speed controlled?: A speed-control lever sets the maximum sewing speed.
Start/Stop Button start or stop the machine without using the foot control. Speed Control Lever sets the maximum sewing speed. slide the lever upwards slide the lever downwards.
Document
PFAFF ambition 620 / 630 User's Guide
Issuer
PFAFF
Extraction
Native document text
PDF page
42
Open source
Open cited PDF at page 42Open OEM source or support page
Advanced technical receipt
Asset SHA-256
293704a451da9a631e14669ed6f34ca3cb752468676c86d35048420271f37ac7
Locator
1b069942f110e0182d90b5db7d5850813098098da395d5674fadbd49bdc6ed25
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Can the needle stop position be changed?: A needle stop up/down button changes the needle stop position.
Needle Stop Up/Down Button with setting of the needle stop position is changed
Document
PFAFF ambition 620 / 630 User's Guide
Issuer
PFAFF
Extraction
Native document text
PDF page
41
Open source
Open cited PDF at page 41Open OEM source or support page
Advanced technical receipt
Asset SHA-256
293704a451da9a631e14669ed6f34ca3cb752468676c86d35048420271f37ac7
Locator
23191726b1c39edaf24d479d8b9efa00e8df53b3b70e54665fd3ffeafa57f68a
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • How is a bobbin wound?: Wind an empty bobbin from the horizontal spool position through the stated guides and tension disc.
Winding From Horizontal Position Thread through the hole in the empty bobbin (E) Push the bobbin lever to the right to wind.
Document
PFAFF ambition 620 / 630 User's Guide
Issuer
PFAFF
Extraction
Native document text
PDF page
22
Open source
Open cited PDF at page 22Open OEM source or support page
Advanced technical receipt
Asset SHA-256
293704a451da9a631e14669ed6f34ca3cb752468676c86d35048420271f37ac7
Locator
56a54dcc5116aa2c343d892efc31c7628313d1a3daf235db1733a2c0049e29a2
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Does it have a free arm?: Free arm available after sliding the accessory tray to the left.
Free Arm To use the free arm, slide off the accessory tray. Remove the tray by sliding it to the left.
Document
PFAFF ambition 620 / 630 User's Guide
Issuer
PFAFF
Extraction
Native document text
PDF page
18
Open source
Open cited PDF at page 18Open OEM source or support page
Advanced technical receipt
Asset SHA-256
293704a451da9a631e14669ed6f34ca3cb752468676c86d35048420271f37ac7
Locator
987004c2cd06ee05b8f5af757b1ddadae8dc38cc7b0be13208bd5cc687a92daf
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Which needle system does it use?: Needle system 130/705 H.
  • When should the needle be replaced?: Replace a bent or blunt needle.
Use needle system 130/705 H. Is the needle bent or blunt? Insert a new needle.
Document
PFAFF ambition 620 / 630 User's Guide
Issuer
PFAFF
Extraction
Native document text
PDF page
61
Open source
Open cited PDF at page 61Open OEM source or support page
Advanced technical receipt
Asset SHA-256
293704a451da9a631e14669ed6f34ca3cb752468676c86d35048420271f37ac7
Locator
be3db49a68170f0c4cf9fbc1068012603b2c28e6366fb5342742cfeded584128
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Is extra presser-foot lift available?: The presser foot can be raised higher for heavy fabric or several layers.
  • Which way does the needle face?: Push the needle fully upward with its flat side facing away from you.
  • Can the feed dogs be lowered?: Feed dogs can be lowered or raised with the switch at the back of the free arm.
Changing the Needle flat side Lowering Feed Dogs the presser foot can be raised higher
Document
PFAFF ambition 620 / 630 User's Guide
Issuer
PFAFF
Extraction
Native document text
PDF page
26
Open source
Open cited PDF at page 26Open OEM source or support page
Advanced technical receipt
Asset SHA-256
293704a451da9a631e14669ed6f34ca3cb752468676c86d35048420271f37ac7
Locator
d86c9e0a6a1b4196b95fb08c9c055fbe6b58cc14f22a2138cdd1814f9ddddfd4
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Does it require owner oiling?: No owner lubrication (oiling) is needed.
  • How should the bobbin area be cleaned?: Clean the feed dogs and bobbin area with the included brush.
  • How is the bobbin case reinstalled?: Replace the bobbin case with its tip fitted into the stopper.
No lubrication (oiling) is needed. Clean the feed dogs and bobbin area tip (A) fits into Do not blow air into the bobbin case area.
Document
PFAFF ambition 620 / 630 User's Guide
Issuer
PFAFF
Extraction
Native document text
PDF page
60
Open source
Open cited PDF at page 60Open OEM source or support page
Advanced technical receipt
Asset SHA-256
293704a451da9a631e14669ed6f34ca3cb752468676c86d35048420271f37ac7
Locator
dcae98ce3a61c2a941ee46324025186a178a3a50fd5a64adb7f3aaf505391c01
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • How is the bobbin inserted?: Insert the bobbin with thread running counterclockwise, then follow the marked needle-plate guide path.
Inserting the Bobbin thread running in a counterclockwise direction. Replace the bobbin cover.
Document
PFAFF ambition 620 / 630 User's Guide
Issuer
PFAFF
Extraction
Native document text
PDF page
23
Open source
Open cited PDF at page 23Open OEM source or support page
Advanced technical receipt
Asset SHA-256
293704a451da9a631e14669ed6f34ca3cb752468676c86d35048420271f37ac7
Locator
f8076ce376c54e546bd703dcd0f788385b94a16a6904f12de2a3a76c7af21237
Destination status
direct_pdf
Machine facets and OEM groups

Cited machine facets

Identity and compatibility badges

Identity families, physical traits, and OEM accessory groups stay separate. A group badge applies only to its named program and domains.

needle system130 · 705Hpresser foot mountsnap-on pin · notchneedle system130 · 705HOEM group · accessory, presser footPFAFF Accessory Group: PFAFF Group K
Detailed specifications, compatible parts, and source library

Evidence coverage

Core answers and cited items

Machine category

domestic sewing

View machine-type evidence · 3 unique proof passages: Proof E7, Proof E8, Proof E9

View proof JSONReport this claim

Core domains answered: needle, presser foot

Domains with cited compatible items: presser foot (35)

bobbinReviewed — not established
needleCore answer answered
presser footCore answer answered

Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.

Specifications

Documented machine facts

Multiple cited representations for one field share one row. SewGraph preserves every value and exact proof passage; it does not guess which representation is “raw” or “normalized” when the public projection does not label that distinction.

bobbin

bobbin orientationcounterclockwise thread direction

View exact evidence · 1 unique proof passage: Proof E10

needle

needle system130/705H

View exact evidence · 2 unique proof passages: Proof E11, Proof E13

presser foot

presser foot mountsnap-on pin/notch

View exact evidence · 1 unique proof passage: Proof E12

Parts & accessories

36 documented relationships

A two-hop result joins the machine’s official accessory-group membership to the OEM part matrix. Open the evidence to inspect both hops.

36 relationships shown

presser foot · 35

STITCH-IN-DITCH FOOT FOR IDT™ SYSTEM
820925096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E15

View proof JSONReport this claim
JOIN AND FOLD EDGING FOOT FOR IDT™ SYSTEM
820931096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E16

View proof JSONReport this claim
BUTTONHOLE FOOT
820672096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E17

View proof JSONReport this claim
ROLLED HEM FOOT
820220096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E18

View proof JSONReport this claim
PIPING FOOT
820532096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E19

View proof JSONReport this claim
FANCY STITCH FOOT FOR IDT™ SYSTEM
820774096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E20

View proof JSONReport this claim
BI-LEVEL TOPSTITCH FOOT FOR IDT™ SYSTEM
820676096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E21

View proof JSONReport this claim
INVISIBLE ZIPPER FOOT
820474096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E22

View proof JSONReport this claim
SEAM GUIDE FOOT FOR IDT™ SYSTEM
820772096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E23

View proof JSONReport this claim
BEADING FOOT, 4 MM & 6 MM
820604096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E24

View proof JSONReport this claim
CLEAR OPEN TOE FOOT FOR IDT™ SYSTEM
820916096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E25

View proof JSONReport this claim
CHENILLE FOOT FOR IDT™ SYSTEM
820615096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E26

View proof JSONReport this claim
RUFFLER
820885096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E27

View proof JSONReport this claim
SEW-ON BUTTON FOOT
820473096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E28

View proof JSONReport this claim
CLEAR STITCH-IN-DITCH FOOT FOR IDT™ SYSTEM
821143096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E29

View proof JSONReport this claim
ROLLER FOOT
820663096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E30

View proof JSONReport this claim
CLEAR 1/4 INCH RIGHT GUIDE FOOT FOR IDT™ SYSTEM
820881096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E31

View proof JSONReport this claim
OPEN TOE FREE-MOTION FOOT
820988096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E32

View proof JSONReport this claim
ADJUSTABLE GUIDE FOOT FOR IDT™ SYSTEM
820677096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E33

View proof JSONReport this claim
NARROW EDGE FOOT FOR IDT™ SYSTEM
821142096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E34

View proof JSONReport this claim
1/4 INCH QUILTING FOOT FOR IDT™ SYSTEM
820926096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E35

View proof JSONReport this claim
GATHERING FOOT
820668096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E36

View proof JSONReport this claim
BIAS BINDER
820245096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E37

View proof JSONReport this claim
SEWING STAR FOOT FOR IDT™ SYSTEM
820654096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E38

View proof JSONReport this claim
ELASTIC FOOT FOR IDT™ SYSTEM
820545096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E39

View proof JSONReport this claim
APPLIQUÉ FOOT
820214096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E40

View proof JSONReport this claim
RIGHT EDGE BI-LEVEL FOOT FOR IDT™ SYSTEM
821007096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E41

View proof JSONReport this claim
NARROW PIPING FOOT
820918096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E42

View proof JSONReport this claim
PINTUCK FOOT, 5-GROOVE
820226096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E43

View proof JSONReport this claim
1/4 INCH RIGHT GUIDE FOOT FOR IDT™ SYSTEM
820924096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E44

View proof JSONReport this claim
CLEAR 1/4 INCH QUILTING FOOT FOR IDT™ SYSTEM
820883096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E45

View proof JSONReport this claim
NON-STICK FOOT FOR IDT™ SYSTEM
820664096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E47

View proof JSONReport this claim
BLINDHEM FOOT FOR IDT™ SYSTEM
820256096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E48

View proof JSONReport this claim
OPEN-TOE APPLIQUÉ FOOT FOR IDT™ SYSTEM
820213096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E49

View proof JSONReport this claim
PERFECT ¼” FOOT WITH GUIDE FOR IDT™ SYSTEM
821063096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E50

View proof JSONReport this claim

attachment · 1

MAGNETIC SEAM GUIDE
821162096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in PFAFF Accessory Group · PFAFF Group K, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to accessory only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E14, Step 2 E46

View proof JSONReport this claim

OEM compatibility programs

Documented group memberships

Group codes are namespaced to the issuing OEM program and apply only to the cited domains. They are not machine series and do not prove compatibility outside those domains.

PFAFF Group K

PFAFF Accessory Group · code K

Applies to: accessory, presser foot

View machine-to-group evidence · 1 unique proof passage: Proof E14

View proof JSONReport this claim

Official source library

Documents used on this page

Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.

PFAFF ambition 620 / 630 User's Guide

instruction

Open official source destination · 1 unique proof passage: Proof E1

PFAFF ambition 620 and 630 instruction manual

instruction

Open official source destination · 1 unique proof passage: Proof E4

PFAFF Accessory Catalogue 2022

accessory compatibility

Open official source destination · 1 unique proof passage: Proof E3

Evidence library

50 exact proof passages from 3 OEM documents

Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.

Open exact proof passages · 50 unique proof passages
Official OEM PDF

What this passage proves

  • Identity — marketing name: quilt ambition™ 630
  • Identity — preferred display name: quilt ambition™ 630
  • Identity — model code: 630
Note: Your PFAFF® ambition™620/quilt ambition™ 630 machine is adjusted to provide the best stitch result at normal room temperature.
Document
PFAFF ambition 620 / 630 User's Guide
Issuer
PFAFF
Extraction
native
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
293704a451da9a631e14669ed6f34ca3cb752468676c86d35048420271f37ac7
Locator
81b6008bbf2d2dd5279d864409c2b67b85024d8243d341e9040a9309e38f4211
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: quilt ambition™ 630
Note: Your PFAFF® ambition™620/quilt ambition™ 630 machine is adjusted to provide the best stitch result at normal room temperature.
Document
PFAFF ambition 620 / 630 User's Guide
Issuer
PFAFF
Extraction
native
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
293704a451da9a631e14669ed6f34ca3cb752468676c86d35048420271f37ac7
Locator
42093749299509164de334e0ebb039e514f33d9d3f2895bd10acebf3ba72f955
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: 630
quilt ambition™ 2.0, 630
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
6
Open source
Open cited PDF at page 6Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
29950db57f0d9600d472f97d3fb891c9f53676e68bc6decdb1c4a94407a535d7
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: 630
6 – Embroidery/Free-Motion Foot (630)
Document
PFAFF ambition 620 and 630 instruction manual
Issuer
PFAFF
Extraction
native
PDF page
9
Open source
Open cited PDF at page 9Open OEM source or support page
Advanced technical receipt
Asset SHA-256
f437b0ebac07fa3132f51f12352c042a0f010ae2a9ca5669a532007981d505b1
Locator
b2c1218cf8f5e34925393fb061e39dc3982a02252c0cf9c528d279f98e458b10
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — model code: 630
  • Identity — preferred display name: quilt ambition™ 630
  • Identity — marketing name: quilt ambition™ 630
Note: Your PFAFF® ambition™620/quilt ambition™ 630 machine is adjusted to provide the best stitch result at normal room temperature.
Document
PFAFF ambition 620 and 630 instruction manual
Issuer
PFAFF
Extraction
native
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
f437b0ebac07fa3132f51f12352c042a0f010ae2a9ca5669a532007981d505b1
Locator
9c936b46a7acda121c957b1fccd318180405dd41d020ccf0a2b49db202d2be99
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: quilt ambition™ 630
Note: Your PFAFF® ambition™620/quilt ambition™ 630 machine is adjusted to provide the best stitch result at normal room temperature.
Document
PFAFF ambition 620 and 630 instruction manual
Issuer
PFAFF
Extraction
native
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
f437b0ebac07fa3132f51f12352c042a0f010ae2a9ca5669a532007981d505b1
Locator
badb99a6b690cbdf0763a5642f5d5576ef0b02506ef3f8d86a578cedd5de17b3
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Machine category — machine type: domestic sewing
the following: Read all instructions before using this household sewing machine. Keep the instructions at a
Document
PFAFF ambition 620 / 630 User's Guide
Issuer
PFAFF
Extraction
native
PDF page
2
Open source
Open cited PDF at page 2Open OEM source or support page
Advanced technical receipt
Asset SHA-256
293704a451da9a631e14669ed6f34ca3cb752468676c86d35048420271f37ac7
Locator
cf2b2d81aba4719c932f000a28668f38cfe190d46fbca86bf85d68e282c4329b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Machine category — machine type: domestic sewing
This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594.
Document
PFAFF ambition 620 / 630 User's Guide
Issuer
PFAFF
Extraction
native
PDF page
2
Open source
Open cited PDF at page 2Open OEM source or support page
Advanced technical receipt
Asset SHA-256
293704a451da9a631e14669ed6f34ca3cb752468676c86d35048420271f37ac7
Locator
685f0b83a7caa20577d7deef72cc3303ff7b7fc76bdf0a60cd9d85729144858a
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Machine category — machine type: domestic sewing
This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594.
Document
PFAFF ambition 620 and 630 instruction manual
Issuer
PFAFF
Extraction
native
PDF page
2
Open source
Open cited PDF at page 2Open OEM source or support page
Advanced technical receipt
Asset SHA-256
f437b0ebac07fa3132f51f12352c042a0f010ae2a9ca5669a532007981d505b1
Locator
ca28fa1cf4d253e5da6fa9b0405cea9c39b7f30541e19f1152d6e69d09bd5260
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • bobbin fact — bobbin orientation: counterclockwise thread direction
2. Insert the bobbin in the bobbin case with the thread running in a counterclockwise direction.
Document
PFAFF ambition 620 and 630 instruction manual
Issuer
PFAFF
Extraction
native
PDF page
23
Open source
Open cited PDF at page 23Open OEM source or support page
Advanced technical receipt
Asset SHA-256
f437b0ebac07fa3132f51f12352c042a0f010ae2a9ca5669a532007981d505b1
Locator
ff34c04961f54b8c2176834a2544887b43655c0ab8d821e499548d034dca5736
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • needle fact — needle system: 130/705H
  • Needle answer — 130/705H
Use needle system 130/705 H
Document
PFAFF ambition 620 / 630 User's Guide
Issuer
PFAFF
Extraction
native
PDF page
61
Open source
Open cited PDF at page 61Open OEM source or support page
Advanced technical receipt
Asset SHA-256
293704a451da9a631e14669ed6f34ca3cb752468676c86d35048420271f37ac7
Locator
74098fbf8a206715cc1d172706db54631f1a1cc8962a50c0f71e63efc1c05cf1
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • presser foot fact — presser foot mount: snap-on pin/notch
  • Presser foot answer — snap-on pin/notch
Attach Presser Foot Place the presser foot under the presser foot holder (A) lining up the notch (B) with the pins (C). Lower the presser foot lift and the presser foot will engage in the presser foot holder.
Document
PFAFF ambition 620 and 630 instruction manual
Issuer
PFAFF
Extraction
native
PDF page
27
Open source
Open cited PDF at page 27Open OEM source or support page
Advanced technical receipt
Asset SHA-256
f437b0ebac07fa3132f51f12352c042a0f010ae2a9ca5669a532007981d505b1
Locator
3b0cb98160e87b39fac4e604670ea125230abb8726c8c392a49b389aa3af693c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • needle fact — needle system: 130/705H
Use needle system 130/705 H
Document
PFAFF ambition 620 and 630 instruction manual
Issuer
PFAFF
Extraction
native
PDF page
61
Open source
Open cited PDF at page 61Open OEM source or support page
Advanced technical receipt
Asset SHA-256
f437b0ebac07fa3132f51f12352c042a0f010ae2a9ca5669a532007981d505b1
Locator
da34ca9a3261b18a6cc3a3a4c43b3c26781f024223f3a3f498ae779d700f0b32
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • OEM program membership — PFAFF Accessory Group: PFAFF Group K
  • Item fitment path — this machine's OEM group membership for STITCH-IN-DITCH FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for JOIN AND FOLD EDGING FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for BUTTONHOLE FOOT
  • Item fitment path — this machine's OEM group membership for ROLLED HEM FOOT
  • Item fitment path — this machine's OEM group membership for PIPING FOOT
  • Item fitment path — this machine's OEM group membership for FANCY STITCH FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for BI-LEVEL TOPSTITCH FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for INVISIBLE ZIPPER FOOT
  • Item fitment path — this machine's OEM group membership for SEAM GUIDE FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for BEADING FOOT, 4 MM & 6 MM
  • Item fitment path — this machine's OEM group membership for CLEAR OPEN TOE FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for CHENILLE FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for RUFFLER
  • Item fitment path — this machine's OEM group membership for SEW-ON BUTTON FOOT
  • Item fitment path — this machine's OEM group membership for CLEAR STITCH-IN-DITCH FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for ROLLER FOOT
  • Item fitment path — this machine's OEM group membership for CLEAR 1/4 INCH RIGHT GUIDE FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for OPEN TOE FREE-MOTION FOOT
  • Item fitment path — this machine's OEM group membership for ADJUSTABLE GUIDE FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for NARROW EDGE FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for 1/4 INCH QUILTING FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for GATHERING FOOT
  • Item fitment path — this machine's OEM group membership for BIAS BINDER
  • Item fitment path — this machine's OEM group membership for SEWING STAR FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for ELASTIC FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for APPLIQUÉ FOOT
  • Item fitment path — this machine's OEM group membership for RIGHT EDGE BI-LEVEL FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for NARROW PIPING FOOT
  • Item fitment path — this machine's OEM group membership for PINTUCK FOOT, 5-GROOVE
  • Item fitment path — this machine's OEM group membership for 1/4 INCH RIGHT GUIDE FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for CLEAR 1/4 INCH QUILTING FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for MAGNETIC SEAM GUIDE
  • Item fitment path — this machine's OEM group membership for NON-STICK FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for BLINDHEM FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for OPEN-TOE APPLIQUÉ FOOT FOR IDT™ SYSTEM
  • Item fitment path — this machine's OEM group membership for PERFECT ¼” FOOT WITH GUIDE FOR IDT™ SYSTEM
Machines with 7 mm stitch width, and IDT™ system K creative™ 1.5 quilt ambition™ 2.0, 630 ambition™ 1.0, 1.5, 155 ambition™ 610, 620
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
6
Open source
Open cited PDF at page 6Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
b00786399a580802809a3cd6a9b4421bead35167c7df19759ec2ec4eb0499a2b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: STITCH-IN-DITCH FOOT FOR IDT™ SYSTEM (compatible)
820925096 4. Place the quilt under the presser foot with the guide in the seam (ditch) of the pieced quilt patches. B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
53
Open source
Open cited PDF at page 53Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
5c4f236a34192299d2533b8d0e2839f4d5c4f5cd66f578290d1d4b6eea419fc6
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: JOIN AND FOLD EDGING FOOT FOR IDT™ SYSTEM (compatible)
820931096 2. Select the stitch you would like to use. For example: the edging could be sewn onto the base fabric D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
d2d5268ee74e5056024245024b6c87bb7dbb4cbf3e3c339f82b5f88bc11bf780
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BUTTONHOLE FOOT (compatible)
820672096 No matter which machine model you have. A PFAFF® machine will always provide you with a perfect J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
62379fbe08cf13ccf587426b5bb07538e6cc40952a1a83af013c2d91353699bc
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ROLLED HEM FOOT (compatible)
820220096 2. Do not allow fabric to run under the right half of the presser foot. B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
17
Open source
Open cited PDF at page 17Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
39ebb96bfd5d614ab05ec36f79d063f5f4b6ca4e56ed6132daa7d5e5562f5e61
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: PIPING FOOT (compatible)
820532096 as you sew. A B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
36
Open source
Open cited PDF at page 36Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
a30fd6023056fd63c4a244a5f55f9dd2bbecc7abf8a3d0919c6a24b1b2bb2acd
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: FANCY STITCH FOOT FOR IDT™ SYSTEM (compatible)
820774096 G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
44
Open source
Open cited PDF at page 44Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
0dca063d7fa5cd78c0169d41ab96ac620078c324c32971bf684205a1f0f782c7
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BI-LEVEL TOPSTITCH FOOT FOR IDT™ SYSTEM (compatible)
820676096 3. select a straight stitch. D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
b64e78a842419c2e78863b6da89395f552f5200dd4ad51eec784e061119e8ef9
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: INVISIBLE ZIPPER FOOT (compatible)
820474096 opening. The zipper should be at least 2 cm to 3 cm (3/4 to 1 1/4 inch) longer than the opening. C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
14
Open source
Open cited PDF at page 14Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
0c98caca310f713667f0f849e3257181df1be664919b3ac90502ba31944b6084
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: SEAM GUIDE FOOT FOR IDT™ SYSTEM (compatible)
820772096 2. Engage the IDT™ system. B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
11
Open source
Open cited PDF at page 11Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
bbc2e6cc42e30e55dd5420462f571a5fa8a5fb74741414fb1329bd237c4c3645
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BEADING FOOT, 4 MM & 6 MM (compatible)
820604096 For 4 mm beads Zigzag stitch length 3.5 width 4.0 C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
32
Open source
Open cited PDF at page 32Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
385e23b3963d494fa74cb91627b782099bd882d185c3979d71f91cc1c3020b67
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR OPEN TOE FOOT FOR IDT™ SYSTEM (compatible)
820916096 3. Choose a decorative stitch or a satin stitch. Use pattern mirror if needed. D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
31
Open source
Open cited PDF at page 31Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
41c7f97c27e5e9da72b0449ac0a0c33764e128d914ee684ab8a87a1672e72dfa
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CHENILLE FOOT FOR IDT™ SYSTEM (compatible)
820615096 beautiful effect! B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
34
Open source
Open cited PDF at page 34Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
0811b0a86ffdeabff5376f2aae5e47866782eaa21d74eab2b63227a0c3ea1290
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: RUFFLER (compatible)
820885096 J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
40
Open source
Open cited PDF at page 40Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
33bb115c6e922c6150c0dfccf383db9c2e71b328c28a689b3459437453a67c4c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: SEW-ON BUTTON FOOT (compatible)
820473096 button to be placed. Manually turn the hand wheel to make sure C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
11
Open source
Open cited PDF at page 11Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
c1c66dc2a049ac163e3bddff9e1d0d3bc4e5b68366546a80b8243f7c14c50a9a
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR STITCH-IN-DITCH FOOT FOR IDT™ SYSTEM (compatible)
821143096 4. Place the quilt under the presser foot with the guide in the seam (ditch) of the pieced quilt patches. D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
53
Open source
Open cited PDF at page 53Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
e94d24ecb7b5eacb9e55f8a3e9896f4ce7dc64d70d60eabded59bc04580609cb
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ROLLER FOOT (compatible)
820663096 B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
19
Open source
Open cited PDF at page 19Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
d6231d3da3521ed4ccea170659c0a6e41d65a451219c45fe4981c31a00e31c37
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR 1/4 INCH RIGHT GUIDE FOOT FOR IDT™ SYSTEM (compatible)
820881096 3. Select a straight stitch. D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
52
Open source
Open cited PDF at page 52Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
99efd0a56a23e4692179fde68d545b877e93be7528b8be2e7dccf5fa90eabe1b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: OPEN TOE FREE-MOTION FOOT (compatible)
820988096 K
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
55
Open source
Open cited PDF at page 55Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
a43418d6ee7bf53b08f28aa3c4f04dc27928b53a0482d87d2d472b0526dc06d6
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ADJUSTABLE GUIDE FOOT FOR IDT™ SYSTEM (compatible)
820677096 2. Engage the IDT™ system. D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
e9e7d26ddd59906e6e091d5c34e868da5ae0db3fa61a64a14a01dbbdd1115602
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: NARROW EDGE FOOT FOR IDT™ SYSTEM (compatible)
821142096 B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
18
Open source
Open cited PDF at page 18Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
3e6abb7ee922c596ad599ecc6787a0bdb3af3b9b9c2c411498a04403940747f4
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 1/4 INCH QUILTING FOOT FOR IDT™ SYSTEM (compatible)
820926096 2. Engage the IDT™ system, if available on your machine. D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
51
Open source
Open cited PDF at page 51Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
240919334694bb7f0025ca5be51ecc3e8a1cac647f8e575287ccb23a4b77f2f0
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: GATHERING FOOT (compatible)
820668096 B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
42
Open source
Open cited PDF at page 42Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
e483c9046f56c267be718cc0f9a7a025b6a82708dfa453d2b3cb133de163f544
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BIAS BINDER (compatible)
820245096 5. Stitch about 25 mm (1 inch) along the Bias Tape. A B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
17
Open source
Open cited PDF at page 17Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
d697497cea7acacadb5d5b2d10eae3ca6616982ea3d1d2a2608c031bf2d9ed55
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: SEWING STAR FOOT FOR IDT™ SYSTEM (compatible)
820654096 4. Sew as desired. D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
32
Open source
Open cited PDF at page 32Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
a2559233af42cc36c5ae14707b983f52a8ba32379aa528561663ed5aff73e357
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ELASTIC FOOT FOR IDT™ SYSTEM (compatible)
820545096 3. Insert the elastic into the longer slot opening on the base of the presser foot. B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
16
Open source
Open cited PDF at page 16Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
74742c64b65a5f0b83e92132119edc90447dc4d6b180e0b42d96876961f47f2a
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: APPLIQUÉ FOOT (compatible)
820214096 4. Place stabilizer underneath the appliqué area. Stitch over all edges to prevent fraying. Use “needle B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
29
Open source
Open cited PDF at page 29Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
e56c757ee8f0d10864077850f13dcc083f0faab1a5c309c94a38e508cc7b6ba6
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: RIGHT EDGE BI-LEVEL FOOT FOR IDT™ SYSTEM (compatible)
821007096 3. Select a straight stitch or a decorative stitch. D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
21
Open source
Open cited PDF at page 21Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
fb448c318d74367412f7a3da61400dca39eff54f593ba1bf29511377c75d4c15
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: NARROW PIPING FOOT (compatible)
820918096 1. Snap on the Narrow Piping Foot. A B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
37
Open source
Open cited PDF at page 37Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
8976739c789855c2f5823b7375573d988d343927ad73b4e23a94a535f75b0eca
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: PINTUCK FOOT, 5-GROOVE (compatible)
820226096 4. Using a water-soluble marker, draw a placement line for your first pintuck. B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
25
Open source
Open cited PDF at page 25Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
c9577256198b8e3261da82129b66f2fca0b7bda88c715549c6b9f57119e42fdf
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 1/4 INCH RIGHT GUIDE FOOT FOR IDT™ SYSTEM (compatible)
820924096 2. Engage the IDT™ system. 2. Engage the IDT™ system. B C D E F G J K
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
52
Open source
Open cited PDF at page 52Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
0d9c323e016c6eb393055819842b7ceee145c4fd5bd362486b6e50a398157336
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR 1/4 INCH QUILTING FOOT FOR IDT™ SYSTEM (compatible)
820883096 5. When using 1/8 inch seam allowance, guide the fabric along the inner edge of the toe. When using D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
51
Open source
Open cited PDF at page 51Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
8ebfd536e092fa09aa218e1d3cd90834e949011acbec662c799265dabe009779
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — attachment: MAGNETIC SEAM GUIDE (compatible)
821162096 J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
21
Open source
Open cited PDF at page 21Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
e2702183aba3df9a2025b75660d4b0efa988db6284c258ac01862b4ba2e2d357
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: NON-STICK FOOT FOR IDT™ SYSTEM (compatible)
820664096 B C D E F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
19
Open source
Open cited PDF at page 19Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
71b6d6531828caea238e2d99c9d8d751a1e5424a23eb63227de87b2d9cbde73e
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BLINDHEM FOOT FOR IDT™ SYSTEM (compatible)
820256096 5. Use the needle position and the width dial to regulate the penetration of the needle in the crease. D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
18
Open source
Open cited PDF at page 18Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
44b2fb3213e1985448e675b6f1394dc71dde1426b886c0530e2b4e0f123c20c0
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: OPEN-TOE APPLIQUÉ FOOT FOR IDT™ SYSTEM (compatible)
820213096 F G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
31
Open source
Open cited PDF at page 31Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
7ceddf2a5f1a0c2cfa43088a045a16007ce883afa1fd361df7b0411edee7e7b4
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: PERFECT ¼” FOOT WITH GUIDE FOR IDT™ SYSTEM (compatible)
821063096 3. Select a straight stitch. B C D E G J K L
Document
PFAFF Accessory Catalogue 2022
Issuer
PFAFF
Extraction
native
PDF page
50
Open source
Open cited PDF at page 50Open OEM source or support page
Advanced technical receipt
Asset SHA-256
33fb6a8f2437c1136b965cb7a59f34c75bfbc8823d0c4e0380b1cb4a62c3f68f
Locator
0ce82e912b1a59ca503b4d479f577155064df45c2e287f5ebf11f00667724b73
Destination status
direct_pdf

What is supported, and what remains open?

4 supported answers and 11 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.

Unresolved owner questions (7)
  • Can the presser-foot holder be removed?: Not established — Not yet verified: The reviewed passages do not establish whether the presser-foot holder is owner-removable.
  • What shank type is it?: Not established — Not yet verified: The reviewed passages do not state a standardized low-, high- or other shank class.
  • Will regular low-shank screw-on feet fit?: Not established — Not yet verified: Snap-on foot-to-holder attachment does not establish generic low-shank screw-on-foot compatibility.
  • Which third-party adapters fit?: Not established — Not yet verified: No third-party adapter compatibility is established.
  • Which bobbin class does it use?: Not established — Not yet verified: The reviewed passages do not state a standardized bobbin class or system.
  • What bobbin dimensions and material are required?: Not established — Not yet verified: Bobbin dimensions, profile, material and substitution equivalence are not established.
  • What hook system does it use?: Not established — Not yet verified: The reviewed passages do not establish standardized hook orientation or drive.

Report a correction or share an OEM source

Advanced provenance and dataset receipt

Public snapshot a1cc1aceef228fcf33329e37165ab888ce5b9fe3f13eb56967ae0fbf41d8d8a7

Catalog e156281c7d3048027b5ac89e7476be8f54dd5a9309505e96260b0455d3cd2a7e · exact native quotes only · dossier method sewgraph-model-dossier-v2