Free arm
conditional
Using both hands, swing the accessory tray left and lift it out of its hole to use the free arm. When replacing the tray, ensure it is flush with the free arm.
Source evidence · 1 unique proof passage: Proof E1
PFAFF · verified physical machine
select 1520
Cited model code 1520
Identity verified · evidence for each owner answer
Identity verified · evidence for each answer
Using and maintaining this machine
Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.
Features and specifications
Bobbins and hook
Insertion thread path
conditional
Insert the full bobbin in its case; pull thread sideways through slot A and under tension plate B until it rests in the opening. Viewed while pulling the thread, the bobbin must turn clockwise.
- Switch off the main switch before opening the bobbin-case/hook cover.
Source evidence · 2 unique proof passages: Proof E4, Proof E3
Case insertion
conditional
Lift lever F and slide the case fully onto hook pin D with opening E upward. Pull the thread sharply to check that the case does not fall out.
- Switch off the main switch before opening the bobbin-case/hook cover.
Source evidence · 2 unique proof passages: Proof E4, Proof E3
Presser feet and adapters
Removal procedure
conditional
With the main switch off and needle at its highest point, press the foot upward at the front and downward at the back simultaneously to disengage it from the holder.
Source evidence · 1 unique proof passage: Proof E5
Attachment procedure
conditional
With the main switch off, place the foot under the holder so its pins engage when the lifter is lowered. Raise the lifter to check engagement.
Source evidence · 1 unique proof passage: Proof E5
Needles and threading
Insertion procedure
conditional
Switch off the main switch, lower the presser foot and insert the needle with its flat side toward the rear, pushing it fully upward. Hold the needle and tighten fixing screw 18 firmly.
Source evidence · 1 unique proof passage: Proof E2
Detailed specifications, compatible parts, and source library
Evidence coverage
Core answers and cited items
Machine category: Not yet established
Core domains answered: None yet
Domains with cited compatible items: None yet
Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.
Official source library
Documents used on this page
Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.
PFAFF Select-1540-Manual_Eng.pdf (SVP manuals feed)
instruction manual
Open official source destination · 1 unique proof passage: Proof E1
Evidence library
8 exact proof passages from 1 OEM document
Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.
Open exact proof passages · 8 unique proof passages
Official OEM PDF
What this passage proves
- Free arm: Using both hands, swing the accessory tray left and lift it out of its hole to use the free arm. When replacing the tray, ensure it is flush with the free arm.
Using the free arm In order to sew with the free arm, you must remove the accessory tray. Using both hands, swing the accessory tray (15) to the left and lift it out of the hole. When replacing the removable accessory tray to its proper position, ensure that it is fl ush with the free arm of the sewing machine.
- Document
- PFAFF Select-1540-Manual_Eng.pdf (SVP manuals feed)
- Issuer
- PFAFF
- Extraction
- Native document text
- PDF page
- 13
- Open source
Advanced technical receipt
- Asset SHA-256
- af1e8053e7054b0750379603f69ba953ba13716eae6e3cc1e92e0c8c4ff5ecfc
- Locator
- 8a5eadf07718bf7662c344ce1ee267d7e163583077173b99d79a722dfcbe5a40
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Feed dog lowering: For work such as darning, open the bobbin-case/hook cover and move slide A fully right to lower the feed dog.
- Insertion procedure: Switch off the main switch, lower the presser foot and insert the needle with its flat side toward the rear, pushing it fully upward. Hold the needle and tighten fixing screw 18 firmly.
Changing the needle Switch off the main switch To remove: Lower the presser foot and move the needle to its highest point. Now loosen the fi xing screw (18) and pull the needle downwards. To insert: The fl at side A of the needle must face to the rear. Lower the presser foot and insert the needle, pushing it up as far as it goes. Hold the needle and tighten the fi xing screw (18) fi rmly. Setting the needle thread tension Set the required needle thread tension (10) with the help of the mark A. The normal setting for sewing is 4 to 5. For embroidering, darning and buttonhole set the tension between 2 and 3. Dropping the feed dog For certain sewing work, e.g. darning the feed dog has to be dropped. To do this, open the bobbin case/hook cover and move slide A fully to the right. Now the feed dog is dropped.
- Document
- PFAFF Select-1540-Manual_Eng.pdf (SVP manuals feed)
- Issuer
- PFAFF
- Extraction
- Native document text
- PDF page
- 25
- Open source
Advanced technical receipt
- Asset SHA-256
- af1e8053e7054b0750379603f69ba953ba13716eae6e3cc1e92e0c8c4ff5ecfc
- Locator
- 3cc6ae941b6f1883249b24e60a4fd6da9b73c3b241ccb914f0d967267158d19e
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Feed dog lowering: For work such as darning, open the bobbin-case/hook cover and move slide A fully right to lower the feed dog.
- Insertion thread path: Insert the full bobbin in its case; pull thread sideways through slot A and under tension plate B until it rests in the opening. Viewed while pulling the thread, the bobbin must turn clockwise.
- Case insertion: Lift lever F and slide the case fully onto hook pin D with opening E upward. Pull the thread sharply to check that the case does not fall out.
Bobbin Case/Hook Cover Switch off the main switch Hold the side of the bobbin case/hook cover and open it towards you.
- Document
- PFAFF Select-1540-Manual_Eng.pdf (SVP manuals feed)
- Issuer
- PFAFF
- Extraction
- Native document text
- PDF page
- 18
- Open source
Advanced technical receipt
- Asset SHA-256
- af1e8053e7054b0750379603f69ba953ba13716eae6e3cc1e92e0c8c4ff5ecfc
- Locator
- 97abc3077cb7d6cb31bc47a24e7056628fdca46a4749f08b51b22d01f108e01b
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Insertion thread path: Insert the full bobbin in its case; pull thread sideways through slot A and under tension plate B until it rests in the opening. Viewed while pulling the thread, the bobbin must turn clockwise.
- Case insertion: Lift lever F and slide the case fully onto hook pin D with opening E upward. Pull the thread sharply to check that the case does not fall out.
Inserting the bobbin Insert the full bobbin into the bobbin case. In doing so, pull the thread sideways through slot A, then under the tension plate B until it rests in the opening (see arrow). Check: When you look at the bobbin and pull the thread, the bobbin must turn clockwise. Inserting the bobbin case Lift lever F and slide the bobbin case onto the hook pin D as far as it will go. Opening E of the bobbin case must face upwards. Check: Pull the bobbin thread sharply. The bobbin case must not fall out of the hook.
- Document
- PFAFF Select-1540-Manual_Eng.pdf (SVP manuals feed)
- Issuer
- PFAFF
- Extraction
- Native document text
- PDF page
- 19
- Open source
Advanced technical receipt
- Asset SHA-256
- af1e8053e7054b0750379603f69ba953ba13716eae6e3cc1e92e0c8c4ff5ecfc
- Locator
- 2f0c7297f8c8576de8a943eb4a51b93e986ca5ffe8455e7604709f739fd646c1
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Removal procedure: With the main switch off and needle at its highest point, press the foot upward at the front and downward at the back simultaneously to disengage it from the holder.
- Attachment procedure: With the main switch off, place the foot under the holder so its pins engage when the lifter is lowered. Raise the lifter to check engagement.
Removing the presser foot Turn off the main switch Position the needle at its highest point Press the presser foot upwards at the front and downwards at the back at the same time so that it disengages from the presser foot holder (14) Engaging the presser foot Place the presser foot under the presser foot holder (14) so that when the presser foot lifter (19) is lowered, the pins of the foot engage in the presser foot holder. Check: Please check that the presser foot is properly engaged by raising the presser foot lifter.
- Document
- PFAFF Select-1540-Manual_Eng.pdf (SVP manuals feed)
- Issuer
- PFAFF
- Extraction
- Native document text
- PDF page
- 23
- Open source
Advanced technical receipt
- Asset SHA-256
- af1e8053e7054b0750379603f69ba953ba13716eae6e3cc1e92e0c8c4ff5ecfc
- Locator
- 1b5664085506aecf520fed8b9a10118f6e0a3db1657076d32d19fe04b93c6d96
- Destination status
- direct_pdf
Official OEM PDF
select 1520 1530 1540 Instruction manual
- Document
- PFAFF Select-1540-Manual_Eng.pdf (SVP manuals feed)
- Issuer
- PFAFF
- Extraction
- Native document text
- PDF page
- 1
- Open source
Advanced technical receipt
- Asset SHA-256
- af1e8053e7054b0750379603f69ba953ba13716eae6e3cc1e92e0c8c4ff5ecfc
- Locator
- a08234a1a2aad74a8f922e4425a3258b54030fe754f934077237b0dc4475adf0
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Identity — preferred display name: select 1520
select 1520 1530 1540
- Document
- PFAFF Select-1540-Manual_Eng.pdf (SVP manuals feed)
- Issuer
- PFAFF
- Extraction
- Native document text
- PDF page
- 1
- Open source
Advanced technical receipt
- Asset SHA-256
- af1e8053e7054b0750379603f69ba953ba13716eae6e3cc1e92e0c8c4ff5ecfc
- Locator
- 9c7315dfaa86fcfe9c6b2759cf852aca4acff762ef891c742415200b5303b73f
- Destination status
- direct_pdf
Official OEM PDF
What this passage proves
- Identity — model code: 1520
select 1520 1530 1540
- Document
- PFAFF Select-1540-Manual_Eng.pdf (SVP manuals feed)
- Issuer
- PFAFF
- Extraction
- Native document text
- PDF page
- 1
- Open source
Advanced technical receipt
- Asset SHA-256
- af1e8053e7054b0750379603f69ba953ba13716eae6e3cc1e92e0c8c4ff5ecfc
- Locator
- d525f83152147a6ec9cb5986c4ee1e7cecac923947504d2c25b7844f39e43f59
- Destination status
- direct_pdf
What is supported, and what remains open?
0 supported answers and 7 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.
Unresolved owner questions (4)
- Class system: Not established — Not yet verified: A standardized class or system is not admitted from these operating procedures.
- Part dimensions material: Not established — Not yet verified: Part-number, dimensions and material claims require separate exact review.
- Standardized mount fit: Not established — Not yet verified: These procedures do not establish standardized shank, holder geometry, adapter or item interchangeability.
- System: Not established — Not yet verified: Needle-system selection is outside this bounded operating-instruction pilot.
Advanced provenance and dataset receipt
Public snapshot 9fbab95052af3592248650db659cecddd639c95077005c97e3707a37bf47b400
Source export 6e957329ab8ac4acea57fdae38d1ce6f6035f1146fe4e049ce0a57912e6a6da7 · source method recorded on each citation