SewGraph

singer · verified physical machine

Fashion Mate 5560

Cited model code 5560

View cited identity evidence · 5 unique proof passages

Jump to: Proof E1, Proof E2, Proof E3, Proof E4, Proof E5

verified exact machine · 1/3 core systems

Identity verified · evidence for each answer

Using and maintaining this machine

Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.

Bobbins and hook

Which bobbin class or system applies?

supported

SINGER Class 15 metal bobbins.

Source evidence · 1 unique proof passage: Profile Proof E1

What bobbin material applies?

supported

Metal; do not substitute plastic bobbins.

Source evidence · 1 unique proof passage: Profile Proof E1

How is the bobbin loaded?

conditional

Front-loading removable bobbin case: thread runs clockwise and the case extension seats at 12 o’clock.

  • The case must click into the holder; no standardized hook class is inferred.

Source evidence · 1 unique proof passage: Profile Proof E2

Presser feet and adapters

How do ordinary presser feet attach?

supported

Native snap-on feet. Press the rear shank lever to release the foot; align the replacement foot pin below the groove and lower the lifter until it snaps on.

Source evidence · 1 unique proof passage: Profile Proof E3

What shank system does the manual specify?

conditional

Low shank with snap-on ordinary presser feet.

  • Some optional feet require shank removal; third-party fit is not established.

Source evidence · 1 unique proof passage: Profile Proof E3

Needles and threading

Which way does the needle face?

supported

Insert fully with the flat side facing the back, then tighten the clamp screw.

Source evidence · 1 unique proof passage: Profile Proof E4

When should the needle be replaced?

conditional

Replace after about four projects or approximately 16 sewing hours, and sooner when worn or damaged.

  • Select the needle for the fabric; no universal size is asserted.

Source evidence · 1 unique proof passage: Profile Proof E4

Care and ownership

What owner cleaning and oiling is required?

conditional

For daily use, clean weekly; brush the feed teeth and hook, wipe the race, and apply one drop of sewing-machine oil to the center pin and hook race.

  • Unplug first and reassemble in the documented order.

Source evidence · 1 unique proof passage: Profile Proof E5

Sources for the owner answers above
Official OEM PDF

What this passage supports

  • What owner cleaning and oiling is required?: For daily use, clean weekly; brush the feed teeth and hook, wipe the race, and apply one drop of sewing-machine oil to the center pin and hook race.
For daily machine use, it is recommended that you clean the machine weekly. one drop of sewing machine oil hook race
Document
Singer Fashion Mate 5560 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
33
Open source
Open cited PDF at page 33Open OEM source or support page
Advanced technical receipt
Asset SHA-256
1f7d0180e9994807c9e42d5a44652177d22aa0863d58853119723f48db5d560b
Locator
02ea10c4474d5b927baeb8d6ef4f15873fa213204e36b99529ac1b1a4ec2bd63
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • How is the bobbin loaded?: Front-loading removable bobbin case: thread runs clockwise and the case extension seats at 12 o’clock.
insert the bobbin so that the thread runs clockwise metal extension is positioned at 12 o’clock properly seated into the holder
Document
Singer Fashion Mate 5560 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
1f7d0180e9994807c9e42d5a44652177d22aa0863d58853119723f48db5d560b
Locator
79f418869a72f9c005f0ee2d32a918bb66c49d4fddefaffb4b9592f390e14455
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Which way does the needle face?: Insert fully with the flat side facing the back, then tighten the clamp screw.
  • When should the needle be replaced?: Replace after about four projects or approximately 16 sewing hours, and sooner when worn or damaged.
approximately every 16 hours of sewing time flat side of the top part of the needle is facing the back Insert the new needle as far up as it will go
Document
Singer Fashion Mate 5560 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
25
Open source
Open cited PDF at page 25Open OEM source or support page
Advanced technical receipt
Asset SHA-256
1f7d0180e9994807c9e42d5a44652177d22aa0863d58853119723f48db5d560b
Locator
7b5133f50e2830799ee43d99177b822665813b74bc7a8d62732097960d040ea6
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Which bobbin class or system applies?: SINGER Class 15 metal bobbins.
  • What bobbin material applies?: Metal; do not substitute plastic bobbins.
This machine uses SINGER® Class 15 metal bobbins. Do not substitute with plastic bobbins.
Document
Singer Fashion Mate 5560 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
11
Open source
Open cited PDF at page 11Open OEM source or support page
Advanced technical receipt
Asset SHA-256
1f7d0180e9994807c9e42d5a44652177d22aa0863d58853119723f48db5d560b
Locator
855ab059442ac7a5a40633c4ecf559e5eb66022be992aca3bce9fab2def4824d
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • How do ordinary presser feet attach?: Press the rear shank lever to release the foot; align the replacement foot pin below the groove and lower the lifter until it snaps on.
  • What shank system does the manual specify?: Low shank with snap-on ordinary presser feet.
press the lever The foot will snap on. This machine has a low shank with snap-on presser feet.
Document
Singer Fashion Mate 5560 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
26
Open source
Open cited PDF at page 26Open OEM source or support page
Advanced technical receipt
Asset SHA-256
1f7d0180e9994807c9e42d5a44652177d22aa0863d58853119723f48db5d560b
Locator
99a31338846c0973e54aea0b7bd3eead8ededfbf00de70511b862e68cc816f0a
Destination status
direct_pdf
Machine facets and OEM groups

Cited machine facets

Identity and compatibility badges

Identity families, physical traits, and OEM accessory groups stay separate. A group badge applies only to its named program and domains.

bobbin classClass 15OEM group · accessory, presser footSINGER Accessory M/C Code: SINGER M/C Code CA
Detailed specifications, compatible parts, and source library

Evidence coverage

Core answers and cited items

Machine category

domestic sewing

View machine-type evidence · 4 unique proof passages: Proof E6, Proof E7, Proof E8, Proof E9

View proof JSONReport this claim

Core domains answered: bobbin

Domains with cited compatible items: presser foot (9)

bobbinCore answer answered
needleReviewed — not established
presser foot9 cited items; core not established

Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.

Bobbin compatibility family

Source-local requirement

This groups exact wording from this manufacturer only. It does not claim that similarly named bobbins from another brand are interchangeable.

SINGER Class 15 metal bobbin

Source-local family: SINGER Class 15 source-local families

Use only this style of bobbin when purchasing additional bobbins for your machine. Do not substitute with plastic bobbins.

Do not substitute: The OEM source explicitly preserves the restriction above.

View Bobbin family evidence · 1 unique proof passage: Proof E10

View proof JSONReport this claim

Specifications

Documented machine facts

Multiple cited representations for one field share one row. SewGraph preserves every value and exact proof passage; it does not guess which representation is “raw” or “normalized” when the public projection does not label that distinction.

bobbin

bobbin classClass 15

Conditions: Do not substitute with plastic bobbins.; This machine uses SINGER® Class 15 metal bobbins.; Use only this style of bobbin when purchasing additional bobbins for your machine.

View exact evidence · 1 unique proof passage: Proof E10

Parts & accessories

9 documented relationships

A two-hop result joins the machine’s official accessory-group membership to the OEM part matrix. Open the evidence to inspect both hops.

9 relationships shown

presser foot · 9

PARALLEL SEWING FOOT
250059896
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code CA, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E11, Step 2 E12

View proof JSONReport this claim
BLIND HEM FOOT
250059596
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code CA, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E11, Step 2 E13

View proof JSONReport this claim
EVEN FEED FOOT
250060096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code CA, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E11, Step 2 E14

View proof JSONReport this claim
ZIPPER FOOT
250051696
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code CA, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E11, Step 2 E15

View proof JSONReport this claim
1/4” FOOT WITH GUIDE
250051996
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code CA, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E11, Step 2 E16

View proof JSONReport this claim
FREE MOTION / DARNING FOOT
250059996
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code CA, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E11, Step 2 E17

View proof JSONReport this claim
FRINGE FOOT
250013901
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code CA, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E11, Step 2 E18

View proof JSONReport this claim
SATIN STITCH FOOT
250060296
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code CA, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E11, Step 2 E19

View proof JSONReport this claim
CORDING FOOT
250006345
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code CA, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E11, Step 2 E20

View proof JSONReport this claim

OEM compatibility programs

Documented group memberships

Group codes are namespaced to the issuing OEM program and apply only to the cited domains. They are not machine series and do not prove compatibility outside those domains.

SINGER M/C Code CA

SINGER Accessory M/C Code · code CA

Applies to: accessory, presser foot

View machine-to-group evidence · 1 unique proof passage: Proof E11

View proof JSONReport this claim

Official source library

Documents used on this page

Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.

Singer Fashion Mate 5560 Instruction Manual

instruction manual

Open official source destination · 1 unique proof passage: Proof E3

Singer 5560__EngSpaFre_0_ytwa9w.pdf (SVP manuals feed)

instruction manual

Open official source destination · 1 unique proof passage: Proof E9

Singer 5560 product page (archived 2025-05-23)

product page

Open official source destination · 1 unique proof passage: Proof E4

Singer 2022 Accessory User Guide

accessory compatibility

Open official source destination · 1 unique proof passage: Proof E1

Evidence library

20 exact proof passages from 4 OEM documents

Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.

Open exact proof passages · 20 unique proof passages
Official OEM PDF

What this passage proves

  • Identity — preferred display name: 5560
  • Identity — model code: 5560
5560
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
5
Open source
Open cited PDF at page 5Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
769bde126bc2051a4108693630dd05efd4ffdd16e94351b5ed09866af7e439e5
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: 5560
5560
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
5
Open source
Open cited PDF at page 5Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
7c6f650fb1a75b19f77ae0749542d812c21528275e6bfc3ccb64add3d8e185a8
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: 5560
INSTRUCTION MANUAL 5560
Document
Singer Fashion Mate 5560 Instruction Manual
Issuer
Singer
Extraction
native
PDF page
1
Open source
Open cited PDF at page 1Open OEM source or support page
Advanced technical receipt
Asset SHA-256
1f7d0180e9994807c9e42d5a44652177d22aa0863d58853119723f48db5d560b
Locator
b8379cb9fe42b01c7ddcbb9a6f37bd0efe4f1665119d8b4c90d0a5f3bf9d6b7c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — preferred display name: Fashion Mate 5560
SINGER® Fashion Mate™ 5560 Sewing Machine
Document
Singer 5560 product page (archived 2025-05-23)
Issuer
Singer
Extraction
native
Evidence edition
Archived OEM HTML · 2025-05-23T05:00:28+00:00
Open source
Open exact archived OEM pageOpen original OEM URL (current content may differ)
Advanced technical receipt
Asset SHA-256
7d15cb2393f1c734a0ec945a7af3ca053ae4ce19b8f8c1f4a344dbc78b575dae
Locator
78bca6a851b19fa5a1e7915c38161bf387ae745e72a99dc0a2c9d6eaecbd3260
Destination status
archived_html
Official OEM PDF

What this passage proves

  • Identity — printed machine name: 5560
SINGER® Fashion Mate™ 5560 Sewing Machine
Document
Singer 5560 product page (archived 2025-05-23)
Issuer
Singer
Extraction
native
Evidence edition
Archived OEM HTML · 2025-05-23T05:00:28+00:00
Open source
Open exact archived OEM pageOpen original OEM URL (current content may differ)
Advanced technical receipt
Asset SHA-256
7d15cb2393f1c734a0ec945a7af3ca053ae4ce19b8f8c1f4a344dbc78b575dae
Locator
ad2c64ebda3063fdceab6b842847b588950d4ed1df68e4c7a542b4d04f6c80bc
Destination status
archived_html
Official OEM PDF

What this passage proves

  • Machine category — machine type: domestic sewing
This household sewing machine is designed to comply with IEC/EN 60335-2-28 and
Document
Singer Fashion Mate 5560 Instruction Manual
Issuer
Singer
Extraction
native
PDF page
3
Open source
Open cited PDF at page 3Open OEM source or support page
Advanced technical receipt
Asset SHA-256
1f7d0180e9994807c9e42d5a44652177d22aa0863d58853119723f48db5d560b
Locator
81187b5b6cdac7c002ccd44612edf7d4cd4a2d93e38cda019763690ea8ac3d67
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Machine category — machine type: domestic sewing
followed, including the following: Read all instructions before using this household sewing machine. Keep the
Document
Singer Fashion Mate 5560 Instruction Manual
Issuer
Singer
Extraction
native
PDF page
3
Open source
Open cited PDF at page 3Open OEM source or support page
Advanced technical receipt
Asset SHA-256
1f7d0180e9994807c9e42d5a44652177d22aa0863d58853119723f48db5d560b
Locator
0adf93f1117713b5bd9079933e10f4df84e04f1780ee8b7d47afbdf9f2a6040b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Machine category — machine type: domestic sewing
This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594. IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, including the following: Read all instructions before using this household sewing machine.
Document
Singer Fashion Mate 5560 Instruction Manual
Issuer
Singer
Extraction
native
PDF page
3
Open source
Open cited PDF at page 3Open OEM source or support page
Advanced technical receipt
Asset SHA-256
1f7d0180e9994807c9e42d5a44652177d22aa0863d58853119723f48db5d560b
Locator
a326db22e6a6002d496b5373d48b4bc39c471aa472a31c3f13151e5d58f53c6b
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Machine category — machine type: domestic sewing
This household sewing machine is designed to comply with IEC/EN 60335-2-28 and
Document
Singer 5560__EngSpaFre_0_ytwa9w.pdf (SVP manuals feed)
Issuer
Singer
Extraction
native
PDF page
3
Open source
Open cited PDF at page 3Open OEM source or support page
Advanced technical receipt
Asset SHA-256
551d9268d5ec54942b3c61214929674cd338fa7b5cd83f1f3e26c7bf391a57f1
Locator
cb0add63ab63fc92ae43bf158abdd31f7ece7c4dfc5a4c1cea4b4f497b4670a3
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • bobbin fact — bobbin class: Class 15
  • Bobbin answer — Class 15
Winding the Bobbin → This machine uses SINGER® Class 15 metal bobbins. Use only this style of bobbin when purchasing additional bobbins for your machine. Do not substitute with plastic bobbins.
Document
Singer Fashion Mate 5560 Instruction Manual
Issuer
Singer
Extraction
native
PDF page
11
Open source
Open cited PDF at page 11Open OEM source or support page
Advanced technical receipt
Asset SHA-256
1f7d0180e9994807c9e42d5a44652177d22aa0863d58853119723f48db5d560b
Locator
859a24256cfbf5f4b286898ace49c7be0d057548281c8d985abe55ae01494578
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • OEM program membership — SINGER Accessory M/C Code: SINGER M/C Code CA
  • Item fitment path — this machine's OEM group membership for PARALLEL SEWING FOOT
  • Item fitment path — this machine's OEM group membership for BLIND HEM FOOT
  • Item fitment path — this machine's OEM group membership for EVEN FEED FOOT
  • Item fitment path — this machine's OEM group membership for ZIPPER FOOT
  • Item fitment path — this machine's OEM group membership for 1/4” FOOT WITH GUIDE
  • Item fitment path — this machine's OEM group membership for FREE MOTION / DARNING FOOT
  • Item fitment path — this machine's OEM group membership for FRINGE FOOT
  • Item fitment path — this machine's OEM group membership for SATIN STITCH FOOT
  • Item fitment path — this machine's OEM group membership for CORDING FOOT
  • Presser foot answer — 1 OEM-cited compatible items
CA SeriesM3300 M3400 M3500 Simple 1732 2932 3116 3221 3232 3210 Simple 3223 Simple 3229 Simple Brilliance Fashionmate 5400 5200 5500 5560
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
5
Open source
Open cited PDF at page 5Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
15b616c7e4a20f76067597b7565a49e558750171c12062d3ff1678ce5927bc20
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: PARALLEL SEWING FOOT (compatible)
#250059896 M/C Code: MA, MB, CA, CB, CC, EA, EB,
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
21
Open source
Open cited PDF at page 21Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
cf5c4990074647eb6310a26071609f45b341d0a52cdab4c32a1eddca4325f242
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BLIND HEM FOOT (compatible)
  • Presser foot answer — 1 OEM-cited compatible items
#250059596 M/C Code: MA, MB, CA
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
11
Open source
Open cited PDF at page 11Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
a69218ba2e1c6eeed357e57fd46724553ad674e7fe1440a358b6672750a2230c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: EVEN FEED FOOT (compatible)
#250060096 M/C Code: MA, MB, CA, CB, CC, EA, EB,
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
31
Open source
Open cited PDF at page 31Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
84786758940c08882238aeb830c6647d572ec8c7c26133c60d5fe81cb53a0923
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ZIPPER FOOT (compatible)
#250051696 M/C Code: MA, MB, CA
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
fc07ab9d67af137c1516f43ed5ee6160d38ba13f619119844297bd4c56598277
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: 1/4” FOOT WITH GUIDE (compatible)
#250051996 M/C Code: CA, CB, CC, EA, EB,
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
29
Open source
Open cited PDF at page 29Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
8c066a34bfd33d8855f4f7f71bb1b380e70f8b3cbea9d7682b7fa579df222cb1
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: FREE MOTION / DARNING FOOT (compatible)
#250059996 M/C Code: MA, MB, CA, CB, CC, EA, EB,
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
30
Open source
Open cited PDF at page 30Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
a73e4907eb077ff4a91b79f3467871a6709ba4aabbd9eb08c330c118de2dccf3
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: FRINGE FOOT (compatible)
#250013901 M/C Code: MB, CA
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
21
Open source
Open cited PDF at page 21Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
f06199765ef1a4b2d7ec7c1a96cc5a3e1cb7bcf5ae90cd569fa26d07864e6ecb
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: SATIN STITCH FOOT (compatible)
#250060296 M/C Code: MA, MB, CA, CB, CC, EA, EB,
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
22
Open source
Open cited PDF at page 22Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
2cd6724c8e7d11e77b6dd83d2bc4e5a1519bc7bab09b49c0970358c31062323a
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CORDING FOOT (compatible)
#250006345 M/C Code: CA, EA, EB
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
dbba345a75d909af3976334bfa916423848737231bdd90a96e1cdbb2690340c2
Destination status
direct_pdf

What is supported, and what remains open?

4 supported answers and 4 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.

Unresolved owner questions (0)

    Report a correction or share an OEM source

    Advanced provenance and dataset receipt

    Public snapshot a1cc1aceef228fcf33329e37165ab888ce5b9fe3f13eb56967ae0fbf41d8d8a7

    Catalog e156281c7d3048027b5ac89e7476be8f54dd5a9309505e96260b0455d3cd2a7e · exact native quotes only · dossier method sewgraph-model-dossier-v2