Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.
Bobbins and hook
Class
conditional
Class 15
Use only the stated SINGER bobbins on this machine; no 15J equivalence or cross-model substitution.
Insertion orientation: Insert with the flat side facing back.
Insertion depth: Push the needle up to the stop.
Replacement interval: Typically replace every 6–8 sewing hours.
Insert the new needle into the needle holder with the flat side facing back. Push the needle up to the stop. Typically, needles should be replaced every 6-8 sewing hours.
Document
Singer Singer C620L Serenade
Issuer
Singer
Extraction
Visually verified transcription of a scanned page
Visual verification
Checked 2026-09-13T14:55:00Z. The page image and transcription are hash-bound in the evidence record.
Removal: Press the release button to remove the foot.
Attachment: Align the foot pin with the holder and lower the lifter until the foot locks into the holder.
Press the release button for the presser foot to remove it. Place the desired presser foot onto the needle plate and align the presser foot pin with the presser foot holder. Lower the presser foot lifter so that the presser foot locks into the presser foot holder.
Document
Singer Singer C620L Serenade
Issuer
Singer
Extraction
Visually verified transcription of a scanned page
Visual verification
Checked 2026-09-13T14:55:00Z. The page image and transcription are hash-bound in the evidence record.
Insertion direction: Insert so it rotates counterclockwise when thread is pulled.
Insert the bobbin so that it rotates counterclockwise when pulling on the thread. This point is very important. If the bobbin rotates clockwise, it may cause issues with the bobbin thread when sewing.
Document
Singer Singer C620L Serenade
Issuer
Singer
Extraction
Visually verified transcription of a scanned page
Visual verification
Checked 2026-09-13T14:55:00Z. The page image and transcription are hash-bound in the evidence record.
Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.
Specifications
Documented machine facts
Multiple cited representations for one field share one row. SewGraph preserves every value and exact proof passage; it does not guess which representation is “raw” or “normalized” when the public projection does not label that distinction.
bobbin
bobbin class
Class 15J
Conditions: Only use these bobbins on your machine.
Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.
Singer Singer C620L Serenade
instruction manual
Open official source destination · 1 unique proof passage:Proof E1
Evidence library
5 exact proof passages from 1 OEM document
Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.
Open exact proof passages · 5 unique proof passages