SewGraph

SINGER · verified physical machine

M3200

View cited identity evidence · 1 unique proof passage

Jump to: Proof E12

Identity verified · evidence for each owner answer

Identity verified · evidence for each answer

Using and maintaining this machine

Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.

Presser feet and adapters

Native attachment

supported

Ordinary feet attach by placing the foot pin into the cut-out in the presser-foot holder.

Source evidence · 1 unique proof passage: Profile Proof E1

Holder removal

conditional

The manual shows the source-named presser-foot shank as separately removable from the presser bar.

  • This source wording does not establish a standardized low-, high- or slant-shank geometry.

Source evidence · 1 unique proof passage: Profile Proof E1

Zipper foot attachment

conditional

The included zipper foot can attach on the right or left for the side being sewn.

  • This is limited to the named included zipper foot; it does not establish generic third-party fit.

Source evidence · 1 unique proof passage: Profile Proof E2

Bobbins and hook

Class system

supported

Singer Class 15 bobbins; four are listed as standard accessories.

Source evidence · 1 unique proof passage: Profile Proof E3

Case loading

conditional

Remove the front bobbin case by its tab, insert the bobbin with thread running clockwise, then insert the case into the shuttle.

  • Raise the needle fully and switch power off before insertion or removal.

Source evidence · 1 unique proof passage: Profile Proof E4

Unwind direction

supported

Clockwise in the removable bobbin case.

Source evidence · 1 unique proof passage: Profile Proof E4

Needles and threading

Types and uses

conditional

Singer 2020 sharp needles for natural woven fabrics, 2045 ball-point needles for knits and stretch fabrics, and 2032 leather needles for leather, vinyl and upholstery.

  • Use the source-stated sizes and match needle size to fabric and thread.

Source evidence · 1 unique proof passage: Profile Proof E5

Size range

conditional

The chart spans sizes 9 (70) through 18 (110), with narrower ranges for particular fabrics and needle types.

  • This is a fabric/thread selection chart, not permission to use every size for every material.

Source evidence · 1 unique proof passage: Profile Proof E5

Insertion orientation

conditional

Flat side of the shaft toward the back; insert the needle as far up as it will go.

  • Switch power off before insertion or removal.

Source evidence · 1 unique proof passage: Profile Proof E6

Features and specifications

Maximum stitch width

supported

Maximum zigzag stitch width is 5 mm.

Source evidence · 1 unique proof passage: Profile Proof E7

Upper tension starting point

conditional

Basic upper-thread tension starts at 4.

  • The manual says no single tension setting suits every stitch, thread or fabric.

Source evidence · 1 unique proof passage: Profile Proof E8

Buttonhole type

supported

Four-step buttonhole using the pattern-selector sequence.

Source evidence · 1 unique proof passage: Profile Proof E9

Needle position direction

supported

For straight stitch, dial 0 is center and 5 is full right.

Source evidence · 1 unique proof passage: Profile Proof E7

Care and ownership

Feed area cleaning

conditional

Remove the needle plate and brush lint from the feed-teeth area.

  • Disconnect the machine from electrical power first and follow the manual's removal steps.

Source evidence · 1 unique proof passage: Profile Proof E10

Hook cleaning lubrication

conditional

Remove and clean the hook and race with a soft cloth, then apply one to two drops of sewing-machine oil at the named point before reassembly.

  • Disconnect power first and restore the hook, race cover, retaining arms, bobbin case, bobbin and needle plate exactly as described.

Source evidence · 1 unique proof passage: Profile Proof E10

Sources for the owner answers above
Official OEM PDF

What this passage supports

  • Zipper foot attachment: The included zipper foot can attach on the right or left for the side being sewn.
The zipper foot can be attached right or left depending on which side of the foot you are going to sew.
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
28
Open source
Open cited PDF at page 28Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
0493da084f7e2cc86fec4931095f2ac443f98aa1cf41fb372be62ce1315a1339
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Case loading: Remove the front bobbin case by its tab, insert the bobbin with thread running clockwise, then insert the case into the shuttle.
  • Unwind direction: Clockwise in the removable bobbin case.
Pull the bobbin case tab (a) and remove the bobbin case. Insert the bobbin so that the thread runs in a clockwise direction Insert it into the shuttle.
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
14
Open source
Open cited PDF at page 14Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
0acc3e124d3ab448df45063f845636a1df0b06ce2e6620e12e6cee6f824bcc85
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Feed area cleaning: Remove the needle plate and brush lint from the feed-teeth area.
  • Hook cleaning lubrication: Remove and clean the hook and race with a soft cloth, then apply one to two drops of sewing-machine oil at the named point before reassembly.
Cleaning the feed teeths: Use the brush supplied to clean the whole area. Cleaning and lubricating the hook: Lubricate at the point (6) (1-2 drops) with sewing machine oil.
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
34
Open source
Open cited PDF at page 34Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
1dd7514b26f5c180a15d83be30e80797ebb9565cd826854679f4657b7220ea3a
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Upper tension starting point: Basic upper-thread tension starts at 4.
Basic thread tension setting: "4". There is no single tension setting appropriate for all stitch functions, thread or fabric.
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
15
Open source
Open cited PDF at page 15Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
3f64369d668de41055e4581217cb1b00a4d8663b8ad5f004d1e06d011640c593
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Buttonhole type: Four-step buttonhole using the pattern-selector sequence.
4-Step Buttonhole Stitch (Model M3200/ M3205) Follow the 4-step sequence
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
25
Open source
Open cited PDF at page 25Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
6aefef5a731daec1243938deab484a80b43a7d21094ad7738d078394b957cb52
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Native attachment: Ordinary feet attach by placing the foot pin into the cut-out in the presser-foot holder.
  • Holder removal: The manual shows the source-named presser-foot shank as separately removable from the presser bar.
Install the pin (d) of the presser foot (e) into the cut-out (c) of the presser foot holder. Removing and attaching the presser foot shank Remove and attach the presser foot shank (b) as illustrated.
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
30
Open source
Open cited PDF at page 30Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
a2fb2857a70674cbbf0de42a3c3e9f17c5e07d9a148ba6df2f6c92e7ff198321
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Insertion orientation: Flat side of the shaft toward the back; insert the needle as far up as it will go.
The flat side of the shaft should be towards the back. Insert the needle as far up as it will go.
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
33
Open source
Open cited PDF at page 33Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
b1ab1dda8864d1fed4506d3fad61b3c96791252e684b561dcbdfe526cc65d811
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Maximum stitch width: Maximum zigzag stitch width is 5 mm.
  • Needle position direction: For straight stitch, dial 0 is center and 5 is full right.
The maximum zigzag stitch width for zigzag stitching is 5mm The width increases as you move zigzag dial from "0" - "5".
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
ced3297fd235884a8fe1085534bf311e8e6e0840553bb375ffdb34d1ea886cb9
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Class system: Singer Class 15 bobbins; four are listed as standard accessories.
Standard accessories SINGER Class 15 bobbins (4x)
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
d527aef08105ea43d75da8af5bfdad86702812aea76109221297bf69cc0fa7a3
Destination status
direct_pdf
Official OEM PDF

What this passage supports

  • Types and uses: Singer 2020 sharp needles for natural woven fabrics, 2045 ball-point needles for knits and stretch fabrics, and 2032 leather needles for leather, vinyl and upholstery.
  • Size range: The chart spans sizes 9 (70) through 18 (110), with narrower ranges for particular fabrics and needle types.
Standard sharp needles. Sizes range Ball point needle, scarfed. Leather needles. 12 (80) to 18 (110). IMPORTANT: Match needle size to thread size and weight of fabric.
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
31
Open source
Open cited PDF at page 31Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
d53234f615472e640c5b61d496a7e6106bb20126e365e06ab729293bdab64dae
Destination status
direct_pdf
Machine facets and OEM groups

Cited machine facets

Identity and compatibility badges

Identity families, physical traits, and OEM accessory groups stay separate. A group badge applies only to its named program and domains.

OEM group · accessory, presser footSINGER Accessory M/C Code: SINGER M/C Code MA
Detailed specifications, compatible parts, and source library

Evidence coverage

Core answers and cited items

Machine category

domestic sewing

View machine-type evidence · 1 unique proof passage: Proof E6

View proof JSONReport this claim

Core domains answered: None yet

Domains with cited compatible items: presser foot (12)

bobbinNot yet reviewed
needleNot yet reviewed
presser foot12 cited items; core not established

Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.

Parts & accessories

12 documented relationships

A two-hop result joins the machine’s official accessory-group membership to the OEM part matrix. Open the evidence to inspect both hops.

12 relationships shown

presser foot · 12

SEW EASY FOOT
250029647
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code MA, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E8

View proof JSONReport this claim
ZIPPER FOOT
250051696
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code MA, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E9

View proof JSONReport this claim
STRAIGHT STITCH FOOT
250052196
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code MA, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E10

View proof JSONReport this claim
UNIVERSAL SHANK
250052596
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code MA, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E11

View proof JSONReport this claim
BLIND HEM FOOT
250059596
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code MA, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E12

View proof JSONReport this claim
CLEAR OPEN TOE FOOT
250059696
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code MA, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E13

View proof JSONReport this claim
OVERCASTING FOOT
250059796
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code MA, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E14

View proof JSONReport this claim
PARALLEL SEWING FOOT
250059896
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code MA, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E15

View proof JSONReport this claim
FREE MOTION / DARNING FOOT
250059996
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code MA, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E16

View proof JSONReport this claim
EVEN FEED FOOT
250060096
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code MA, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E17

View proof JSONReport this claim
SATIN STITCH FOOT
250060296
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code MA, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E18

View proof JSONReport this claim
INVISIBLE ZIPPER FOOT
250061696
compatible two-hop OEM matrix
Why this fits

Two cited hops: this machine is in SINGER Accessory M/C Code · SINGER M/C Code MA, and the OEM matrix lists this part for that group. Edition 2022. Region global_en. Applies to presser foot only.

Inspect complete evidence path · 2 unique proof passages: Step 1 E7, Step 2 E19

View proof JSONReport this claim

OEM compatibility programs

Documented group memberships

Group codes are namespaced to the issuing OEM program and apply only to the cited domains. They are not machine series and do not prove compatibility outside those domains.

SINGER M/C Code MA

SINGER Accessory M/C Code · code MA

Applies to: accessory, presser foot

View machine-to-group evidence · 1 unique proof passage: Proof E7

View proof JSONReport this claim

Official source library

Documents used on this page

Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.

Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual

instruction manual

Open official source destination · 1 unique proof passage: Proof E1

Singer 2022 Accessory User Guide

accessory compatibility

Open official source destination · 1 unique proof passage: Proof E2

Evidence library

19 exact proof passages from 2 OEM documents

Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.

Open exact proof passages · 19 unique proof passages
Official OEM PDF

What this passage proves

  • Identity — preferred display name: M3200
  • Identity — model code: M3200
M3200 / M3300 / M3330 / M3400 / M3500 M3205 / M3305 / M3335 / M3405 / M3505
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
native
PDF page
1
Open source
Open cited PDF at page 1Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
1bf9fb9693de1482efd87b8c820e2aff2eb15ae2c1929fa36e4b69a422c84668
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — preferred display name: M3200
  • Identity — model code: M3200
M3200
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
5
Open source
Open cited PDF at page 5Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
df2a44a7a6aeb4b23a81aace4a5a78b88b04ffe34801e58272693810b76a4e6c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: M3200
M3200 / M3300 / M3330 / M3400 / M3500 M3205 / M3305 / M3335 / M3405 / M3505
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
native
PDF page
1
Open source
Open cited PDF at page 1Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
980e24e12decde11acf4db8d6ecb1646dfba2d4a0f6859d49bdba1ba21ee9fa7
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: M3200
M3200
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
5
Open source
Open cited PDF at page 5Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
59e0906ecfc40393c8a7441f82aed6471e3a610b372960ab10ec758bce5940e4
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — printed machine name: M3200
4-Step Buttonhole Stitch (Model M3200/
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
native
PDF page
7
Open source
Open cited PDF at page 7Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
70f614cc1c73dd085ce84f97fa7e25946b3f025f8a77d09505ce23cbbef3954f
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Machine category — machine type: domestic sewing
This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594.
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
native
PDF page
3
Open source
Open cited PDF at page 3Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
f7ca8fd080605ccb85b3f005bf697ce176f48a31f2e7673bac79157b56d1de80
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • OEM program membership — SINGER Accessory M/C Code: SINGER M/C Code MA
  • Item fitment path — this machine's OEM group membership for SEW EASY FOOT
  • Item fitment path — this machine's OEM group membership for ZIPPER FOOT
  • Item fitment path — this machine's OEM group membership for STRAIGHT STITCH FOOT
  • Item fitment path — this machine's OEM group membership for UNIVERSAL SHANK
  • Item fitment path — this machine's OEM group membership for BLIND HEM FOOT
  • Item fitment path — this machine's OEM group membership for CLEAR OPEN TOE FOOT
  • Item fitment path — this machine's OEM group membership for OVERCASTING FOOT
  • Item fitment path — this machine's OEM group membership for PARALLEL SEWING FOOT
  • Item fitment path — this machine's OEM group membership for FREE MOTION / DARNING FOOT
  • Item fitment path — this machine's OEM group membership for EVEN FEED FOOT
  • Item fitment path — this machine's OEM group membership for SATIN STITCH FOOT
  • Item fitment path — this machine's OEM group membership for INVISIBLE ZIPPER FOOT
MA Series MB Series MC Series Mechanical Tradition Heavy Duty Talent Fashion/Inspiration 1507 2250 4411 5532 4205 1507WC 2259 4423 44S 4206 1525/1725 2263 4432 HD 3321 4210 1748 2273 44S 3323S 4212 8280 2277 5511 3323 4218 8280L 2282 5523 4220 8280 HD6380 4228 SMART II HD6330 (Denim) 1105 Promise CP6350M 1116 1408 (Cosplay) 1120 1409 1130 1412 Promise 7020 1512 Promise II M1500 M1600 M2100 M2400 M3200
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
5
Open source
Open cited PDF at page 5Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
623ea6462e89b4ec51ea04659f3244c4ec030b9ffd72d108035e0c075a9d28a7
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: SEW EASY FOOT (compatible)
#250029647 M/C Code: MA
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
9
Open source
Open cited PDF at page 9Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
b3e0b8b24c46d9ee9b697b4847c6c70a001005a2fd879df9fa5b206bbfb5e86c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: ZIPPER FOOT (compatible)
#250051696 M/C Code: MA, MB, CA
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
fc07ab9d67af137c1516f43ed5ee6160d38ba13f619119844297bd4c56598277
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: STRAIGHT STITCH FOOT (compatible)
#250052196 M/C Code: MA
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
9
Open source
Open cited PDF at page 9Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
b9c0c16aa1170c5e915d882749d1abfc0078ad1f0a2731a2445c4d7a468c1b6c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: UNIVERSAL SHANK (compatible)
#250052596 M/C Code: MA
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
9
Open source
Open cited PDF at page 9Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
6d3d39a1628c6d9b872fd0e9be220249022ede87664834b54e62e8719a3b1671
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: BLIND HEM FOOT (compatible)
#250059596 M/C Code: MA, MB, CA
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
11
Open source
Open cited PDF at page 11Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
a69218ba2e1c6eeed357e57fd46724553ad674e7fe1440a358b6672750a2230c
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: CLEAR OPEN TOE FOOT (compatible)
#250059696 M/C Code: MA, MB,
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
23
Open source
Open cited PDF at page 23Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
a0c4dd5b46bdcf1a6899a0ad8b912156d3cce3a1f7ac6a516d1f448314f6bd68
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: OVERCASTING FOOT (compatible)
#250059796 M/C Code: MA
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
14
Open source
Open cited PDF at page 14Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
317ea865a252a5c4c9c4e089aec7ee58cd44179ae88b727a2d5156d94391f9a9
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: PARALLEL SEWING FOOT (compatible)
#250059896 M/C Code: MA, MB, CA, CB, CC, EA, EB,
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
21
Open source
Open cited PDF at page 21Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
cf5c4990074647eb6310a26071609f45b341d0a52cdab4c32a1eddca4325f242
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: FREE MOTION / DARNING FOOT (compatible)
#250059996 M/C Code: MA, MB, CA, CB, CC, EA, EB,
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
30
Open source
Open cited PDF at page 30Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
a73e4907eb077ff4a91b79f3467871a6709ba4aabbd9eb08c330c118de2dccf3
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: EVEN FEED FOOT (compatible)
#250060096 M/C Code: MA, MB, CA, CB, CC, EA, EB,
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
31
Open source
Open cited PDF at page 31Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
84786758940c08882238aeb830c6647d572ec8c7c26133c60d5fe81cb53a0923
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: SATIN STITCH FOOT (compatible)
#250060296 M/C Code: MA, MB, CA, CB, CC, EA, EB,
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
22
Open source
Open cited PDF at page 22Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
2cd6724c8e7d11e77b6dd83d2bc4e5a1519bc7bab09b49c0970358c31062323a
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Item fitment — presser foot: INVISIBLE ZIPPER FOOT (compatible)
#250061696 M/C Code: MA,
Document
Singer 2022 Accessory User Guide
Issuer
Singer
Extraction
native
PDF page
13
Open source
Open cited PDF at page 13Open OEM source or support page
Advanced technical receipt
Asset SHA-256
073ab787ff23a806c6ae9593ace16eee9394237ae4a38fa0db5a9e82c068d965
Locator
46a1e109dea75b7fd1ecfa4db4c773725f8d84166849bcf177adf6c5c84fe6c7
Destination status
direct_pdf

What is supported, and what remains open?

6 supported answers and 9 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.

Unresolved owner questions (3)
  • Source native shank wording: Not established — Not yet verified: The manual uses the term presser-foot shank but does not establish a standardized shank class.
  • Generic screw on fit: Not established — Not yet verified: Generic low-shank screw-on fit, adapters and cross-brand interchangeability are not established.
  • Cross brand equivalence: Not established — Not yet verified: The nominal Class 15 wording does not prove equivalence to another issuer's bobbin.

Report a correction or share an OEM source

Advanced provenance and dataset receipt

Public snapshot a1cc1aceef228fcf33329e37165ab888ce5b9fe3f13eb56967ae0fbf41d8d8a7

Catalog e156281c7d3048027b5ac89e7476be8f54dd5a9309505e96260b0455d3cd2a7e · exact native quotes only · dossier method sewgraph-model-dossier-v2