SewGraph

SINGER · verified physical machine

M3335

View cited identity evidence · 1 unique proof passage

Jump to: Proof E11

Identity verified · evidence for each owner answer

Identity verified · evidence for each answer

Using and maintaining this machine

Check the conditions alongside each answer. Foot attachment, shank type and adapter requirements are separate; one does not establish universal accessory fit.

Presser feet and adapters

Native attachment

supported

Ordinary feet attach by placing the foot pin into the cut-out in the presser-foot holder.

Source evidence · 1 unique proof passage: Proof E1

Holder removal

conditional

The manual shows the source-named presser-foot shank as separately removable from the presser bar.

  • This source wording does not establish a standardized low-, high- or slant-shank geometry.

Source evidence · 1 unique proof passage: Proof E1

Zipper foot attachment

conditional

The included zipper foot can attach on the right or left for the side being sewn.

  • This is limited to the named included zipper foot; it does not establish generic third-party fit.

Source evidence · 1 unique proof passage: Proof E2

Bobbins and hook

Class system

supported

Singer Class 15 bobbins; four are listed as standard accessories.

Source evidence · 1 unique proof passage: Proof E3

Case loading

conditional

Remove the front bobbin case by its tab, insert the bobbin with thread running clockwise, then insert the case into the shuttle.

  • Raise the needle fully and switch power off before insertion or removal.

Source evidence · 1 unique proof passage: Proof E4

Unwind direction

supported

Clockwise in the removable bobbin case.

Source evidence · 1 unique proof passage: Proof E4

Needles and threading

Types and uses

conditional

Singer 2020 sharp needles for natural woven fabrics, 2045 ball-point needles for knits and stretch fabrics, and 2032 leather needles for leather, vinyl and upholstery.

  • Use the source-stated sizes and match needle size to fabric and thread.

Source evidence · 1 unique proof passage: Proof E5

Size range

conditional

The chart spans sizes 9 (70) through 18 (110), with narrower ranges for particular fabrics and needle types.

  • This is a fabric/thread selection chart, not permission to use every size for every material.

Source evidence · 1 unique proof passage: Proof E5

Insertion orientation

conditional

Flat side of the shaft toward the back; insert the needle as far up as it will go.

  • Switch power off before insertion or removal.

Source evidence · 1 unique proof passage: Proof E6

Features and specifications

Maximum stitch width

supported

Maximum zigzag stitch width is 5 mm.

Source evidence · 1 unique proof passage: Proof E7

Upper tension starting point

conditional

Basic upper-thread tension starts at 4.

  • The manual says no single tension setting suits every stitch, thread or fabric.

Source evidence · 1 unique proof passage: Proof E8

Care and ownership

Feed area cleaning

conditional

Remove the needle plate and brush lint from the feed-teeth area.

  • Disconnect the machine from electrical power first and follow the manual's removal steps.

Source evidence · 1 unique proof passage: Proof E9

Hook cleaning lubrication

conditional

Remove and clean the hook and race with a soft cloth, then apply one to two drops of sewing-machine oil at the named point before reassembly.

  • Disconnect power first and restore the hook, race cover, retaining arms, bobbin case, bobbin and needle plate exactly as described.

Source evidence · 1 unique proof passage: Proof E9

Detailed specifications, compatible parts, and source library

Evidence coverage

Core answers and cited items

Machine category: Not yet established

Core domains answered: None yet

Domains with cited compatible items: None yet

Unknown is not incompatible. A missing answer means the current official evidence does not support one yet.

Official source library

Documents used on this page

Open the exact OEM PDF page or captured HTML edition when a safe destination exists; otherwise SewGraph labels the OEM support-page fallback honestly.

Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual

instruction manual

Source authority: Official OEM PDF

Open official source destination · 1 unique proof passage: Proof E1

Evidence library

11 exact proof passages from 1 OEM document

Every passage below says exactly what visible fact it proves. Repeated references to the same locator are counted once; identity evidence never counts as compatibility evidence.

Open exact proof passages · 11 unique proof passages
Official OEM PDF

What this passage proves

  • Native attachment: Ordinary feet attach by placing the foot pin into the cut-out in the presser-foot holder.
  • Holder removal: The manual shows the source-named presser-foot shank as separately removable from the presser bar.
Install the pin (d) of the presser foot (e) into the cut-out (c) of the presser foot holder. Removing and attaching the presser foot shank Remove and attach the presser foot shank (b) as illustrated.
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
30
Open source
Open cited PDF at page 30Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
a2fb2857a70674cbbf0de42a3c3e9f17c5e07d9a148ba6df2f6c92e7ff198321
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Zipper foot attachment: The included zipper foot can attach on the right or left for the side being sewn.
The zipper foot can be attached right or left depending on which side of the foot you are going to sew.
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
28
Open source
Open cited PDF at page 28Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
0493da084f7e2cc86fec4931095f2ac443f98aa1cf41fb372be62ce1315a1339
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Class system: Singer Class 15 bobbins; four are listed as standard accessories.
Standard accessories SINGER Class 15 bobbins (4x)
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
12
Open source
Open cited PDF at page 12Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
d527aef08105ea43d75da8af5bfdad86702812aea76109221297bf69cc0fa7a3
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Case loading: Remove the front bobbin case by its tab, insert the bobbin with thread running clockwise, then insert the case into the shuttle.
  • Unwind direction: Clockwise in the removable bobbin case.
Pull the bobbin case tab (a) and remove the bobbin case. Insert the bobbin so that the thread runs in a clockwise direction Insert it into the shuttle.
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
14
Open source
Open cited PDF at page 14Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
0acc3e124d3ab448df45063f845636a1df0b06ce2e6620e12e6cee6f824bcc85
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Types and uses: Singer 2020 sharp needles for natural woven fabrics, 2045 ball-point needles for knits and stretch fabrics, and 2032 leather needles for leather, vinyl and upholstery.
  • Size range: The chart spans sizes 9 (70) through 18 (110), with narrower ranges for particular fabrics and needle types.
Standard sharp needles. Sizes range Ball point needle, scarfed. Leather needles. 12 (80) to 18 (110). IMPORTANT: Match needle size to thread size and weight of fabric.
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
31
Open source
Open cited PDF at page 31Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
d53234f615472e640c5b61d496a7e6106bb20126e365e06ab729293bdab64dae
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Insertion orientation: Flat side of the shaft toward the back; insert the needle as far up as it will go.
The flat side of the shaft should be towards the back. Insert the needle as far up as it will go.
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
33
Open source
Open cited PDF at page 33Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
b1ab1dda8864d1fed4506d3fad61b3c96791252e684b561dcbdfe526cc65d811
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Maximum stitch width: Maximum zigzag stitch width is 5 mm.
The maximum zigzag stitch width for zigzag stitching is 5mm The width increases as you move zigzag dial from "0" - "5".
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
20
Open source
Open cited PDF at page 20Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
ced3297fd235884a8fe1085534bf311e8e6e0840553bb375ffdb34d1ea886cb9
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Upper tension starting point: Basic upper-thread tension starts at 4.
Basic thread tension setting: "4". There is no single tension setting appropriate for all stitch functions, thread or fabric.
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
15
Open source
Open cited PDF at page 15Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
3f64369d668de41055e4581217cb1b00a4d8663b8ad5f004d1e06d011640c593
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Feed area cleaning: Remove the needle plate and brush lint from the feed-teeth area.
  • Hook cleaning lubrication: Remove and clean the hook and race with a soft cloth, then apply one to two drops of sewing-machine oil at the named point before reassembly.
Cleaning the feed teeths: Use the brush supplied to clean the whole area. Cleaning and lubricating the hook: Lubricate at the point (6) (1-2 drops) with sewing machine oil.
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
34
Open source
Open cited PDF at page 34Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
1dd7514b26f5c180a15d83be30e80797ebb9565cd826854679f4657b7220ea3a
Destination status
direct_pdf
Official OEM PDF
M3200 / M3300 / M3330 / M3400 / M3500 M3205 / M3305 / M3335 / M3405 / M3505 Instruction Manual
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
1
Open source
Open cited PDF at page 1Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
e3c397e1f9c1ca3c40f56ea6036059eba3abd2f7ffb7c73e7458cb0546be0dc7
Destination status
direct_pdf
Official OEM PDF

What this passage proves

  • Identity — preferred display name: M3335
  • Identity — model code: M3335
M3200 / M3300 / M3330 / M3400 / M3500 M3205 / M3305 / M3335 / M3405 / M3505
Document
Singer M3200/M3300/M3330/M3400/M3500 and M3205/M3305/M3335/M3405/M3505 Instruction Manual
Issuer
Singer
Extraction
Native document text
PDF page
1
Open source
Open cited PDF at page 1Open OEM source or support page
Advanced technical receipt
Asset SHA-256
15bb6717aab8ef8c469a139138120c66b90647a681a0e32b2a162539bb8c4267
Locator
1bf9fb9693de1482efd87b8c820e2aff2eb15ae2c1929fa36e4b69a422c84668
Destination status
direct_pdf

What is supported, and what remains open?

4 supported answers and 9 answers with conditions or remaining limits. Evidence coverage is not a probability of accuracy.

Unresolved owner questions (5)
  • Source native shank wording: Not established — Not yet verified: The manual uses the term presser-foot shank but does not establish a standardized shank class.
  • Generic screw on fit: Not established — Not yet verified: Generic low-shank screw-on fit, adapters and cross-brand interchangeability are not established.
  • Cross brand equivalence: Not established — Not yet verified: The nominal Class 15 wording does not prove equivalence to another issuer's bobbin.
  • Buttonhole type: Not established — Not yet verified: The cover names M3335, but the interior four-step and one-step buttonhole headings omit it.
  • Needle position direction: Not established — Not yet verified: The cover names M3335, but the interior needle-position subgroup lists omit it.

Report a correction or share an OEM source

Advanced provenance and dataset receipt

Public snapshot e7bed4b4ca3f2eea2edb7ac72abce054a2fa975d87087ef7f483001807d97355

Source export 658aba323597b487426b1e32efbd8b6d205a2d60fe6fbf801f888cbd71b95046 · source method recorded on each citation